TN WTB Big block manifolds or shorty headers for big block bagged truck

[sunk99]

Have full length headers but hang too low for my bagged truck.
Thanks

[REEDS 72]

Check my ad for BB exhaust manifolds I have a real nice set of them thanks Reed.

[tyler_lay]

have a stock set off of a 86 454 with smog holes in them there steel not cast so you could put plugs in or weld hole up

[Black71Shorty]

I have a new set of Hedman Mid-length headers made for our trucks with a BB. Part# 69170, they have some scratches on them from mockup only, they are painted not coated. I was going to have them coated and run them but have decided to go a different direction with my exhaust. Comes with 2 1/2" collectors. I'll take $150 plus shipping.

[Black71Shorty]

Here's a picture of them.

[sunk99]

Originally Posted by Black71Shorty

I have a new set of Hedman Mid-length headers made for our trucks with a BB. Part# 69170, they have some scratches on them from mockup only, they are painted not coated. I was going to have them coated and run them but have decided to go a different direction with my exhaust. Comes with 2 1/2" collectors. I'll take $150 plus shipping.

So these don't hang below the frame?

[Black71Shorty]

They are much shorter than full length headers. I have not bolted them up myself, bought them from another guy locally and he used them for mockup. You can go to Hedman website and look at them. These are heavy and very well made, 3/8" flanges with 14ga. tubing. Most headers have 1/4" flanges and thin 18ga. tubes. I could try to get some measurements if you need me to. Let me know.

Thanks

[Cash3481]

I have a set of 72 BB smog manifolds if you need them. The holes are plugged but the provisions are there.