DBW pedal mounting bracket

[Hart_Rod]

DBW mounting bracket for Corvette Pedal

$60 Shipped via USPS (updated 10/4/2022)

Paypal: robhartley@aol.com, enter "CPB" in message block.

I did an LS3 (Gen IV motor) installation in my 1968 C10 a while back. When I got to the point of mounting the DBW pedal, I fabbed up this pedal bracket that bolts to the firewall where the factory pedal used to mount. The bracket is made out of 1/4" steel and has the holes punched in them for ease of installation.

It is set up to use a 2005+ Corvette DBW pedal (GM Part # 25835421) that can be purchased on Ebay for around $50-75. The color code of the Corvette pedal is the same as the Gen IV truck DBW pedal, you just have to swap 2 wires (I'll look those up and post). The nice part about the Corvette pedal, is that the pad is exactly identical to the gas pedal pad in the 71-72 trucks. This allows you can to use the factory stainless trim on it giving you a clean factory look. The pedal bracket is $50 shipped. If you have any questions let me know.

Rob

**************
GEN III truck pedal brackets can be found here: http://67-72chevytrucks.com/vboard/s...d.php?t=651123
**************

[SeTx67]

Does the pedal arm bottom out on the floorboard at wot? What's your paypal?

[Hart_Rod]

Originally Posted by SeTx67

Does the pedal arm bottom out on the floorboard at wot? What's your paypal?

No interference. It is placed to get full throw on the pedal. PM sent.

[SeTx67]

Thanks for the info and all your help. PM replied

[neal64ss]

Whats the part number on that corvette pedal?

[jackyl9999]

I would like one of these brackets. Can you send me your paypal Info.


Also interested in the Corvette pedal p/n if anyone has it.

[Hart_Rod]

Originally Posted by neal64ss

Whats the part number on that corvette pedal?

25835421

Originally Posted by jackyl9999

I would like one of these brackets. Can you send me your paypal Info.


Also interested in the Corvette pedal p/n if anyone has it.

25835421

I added the part number to the my first post.

Paypal is robhartley@aol.com. I pick up a new batch early next week, so it will be toward the end of next week before I ship it out. Thanks,

Rob

[jackyl9999]

That will work fine for me. Paypal payment sent.

[KMC3420]

So you only have to switch 2 wires to run this on a 04 5.3 motor?

[Hart_Rod]

Originally Posted by jackyl9999

That will work fine for me. Paypal payment sent.

Thanks!

Originally Posted by KMC3420

So you only have to switch 2 wires to run this on a 04 5.3 motor?

If you want to use the Corvette pedal. Post a picture of your DBW plug.

[KMC3420]

I don't have my pedal yet. I have an 04 5.3. Just trying to plan this out and the pedal you have is the best pedal I have seen so far.

[mutt_1986]

I already have an 04 truck pedal. Will this bracket work

[Hart_Rod]

Originally Posted by mutt_1986

I already have an 04 truck pedal. Will this bracket work

Can you post a picture of your pedal and the connector?

[Hart_Rod]

Originally Posted by KMC3420

I don't have my pedal yet. I have an 04 5.3. Just trying to plan this out and the pedal you have is the best pedal I have seen so far.

I'm pretty sure the Corvette pedal will work, but I haven't tried it. Maybe do a little research on LS1Tech and see what you can find. I'll look also.

Originally Posted by mutt_1986

I already have an 04 truck pedal. Will this bracket work

As is, if you mount the truck pedal to the bracket, I think it will push the pedal to far towards the driver. I'm going to do some more prototyping with the truck pedal to see what I can come up with.

Originally Posted by jackyl9999

That will work fine for me. Paypal payment sent.

Steve - you pedal bracket will be shipped USPS today. Thanks,

[Hart_Rod]

Another picture of the setup.

[jackyl9999]

Good Deal!


Thanks!!!

[chevyguy_72]

I ordered one of these and it arrived promptly... Its a very nice heavy duty piece... plan on installing it with the vette pedal assembly this week

[4x4k30]

do you have a bracket for the 73 up ? I got a 77 with a 6.0 dbw pedal mine sets to high

[Hart_Rod]

Originally Posted by chevyguy_72

I ordered one of these and it arrived promptly... Its a very nice heavy duty piece... plan on installing it with the vette pedal assembly this week

Thanks!

Originally Posted by jackyl9999

Good Deal!


Thanks!!!

Thank you!

Originally Posted by 4x4k30

do you have a bracket for the 73 up ? I got a 77 with a 6.0 dbw pedal mine sets to high

Can you post pictures of where the pedal would mount?

[4x4k30]

my pedal is even with the brake pedal and its a truck pedal with no sweivel my foot gets tired here are a couple fuzzy pics I used the factory 2500hd pedal mount I just lowered it a little and drilled new holes

[Hart_Rod]

Originally Posted by 4x4k30

my pedal is even with the brake pedal and its a truck pedal with no sweivel my foot gets tired here are a couple fuzzy pics I used the factory 2500hd pedal mount I just lowered it a little and drilled new holes

Thanks for the pics. I'm going to have to find a local truck and do some measuring.

[Houston Ben]

Hey Hart Rod,
Was busy and didn't get a chance to take a pic of my 86' and now im out of town. I hope these work for the square body trucks!! Looking forward to your findings!

[jackyl9999]

Hart rod,
Do you happen to have a link to the info for repinning the DBW plug so I can use the vette pedal?

I am about ready to dive into this part of the project. I have looked on here and Ls1tech and was not able to find anything.

[Hart_Rod]

Originally Posted by Houston Ben

Hey Hart Rod,
Was busy and didn't get a chance to take a pic of my 86' and now im out of town. I hope these work for the square body trucks!! Looking forward to your findings!

I think they will but I just got back from a week long mission trip to Haiti, so I haven't had time to dig more into it. Hopefully this week or next.

Originally Posted by jackyl9999

Hart rod,
Do you happen to have a link to the info for repinning the DBW plug so I can use the vette pedal?

I am about ready to dive into this part of the project. I have looked on here and Ls1tech and was not able to find anything.

I will try to get some pictures taken today or tomorrow to show the difference. Bump this to the top if I haven't by tomorrow evening.

[jackyl9999]

Bump