1969 C 10 driveshaft carrier bearing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

697498chevy · 11-28-2021, 01:38 PM

After 27 years the rubber in mine is pretty mushy . I see Rock Auto sells just the rubber insert . I plan to replace the whole thing , just curious if anyone has replaced just the rubber insert ? THANKS !

Wrenchbender Ret · 11-28-2021, 03:07 PM

I used to replace the rubber only years a go when I had a shop. Its better to replace the whole assem. as they are not all that expensive. You can spin the brg & see if it is quite. If so you can just replace the rubber.

697498chevy · 11-28-2021, 03:19 PM

THANKS Wrenchbender ! The whole thing is like $30 , I was just wondering .

**LockDoc** · 11-28-2021, 06:02 PM

-
I just bought one for my C20 from NAPA. It was $43.00. They had a $17.00 one but it looked pretty crappy.

LockDoc

697498chevy · 11-29-2021, 03:57 PM

THANKS Lockdoc . I'll probably get mine at NAPA too .

697498chevy · 11-29-2021, 05:53 PM

See online NAPA has 2 . One's $27 and one's $60 . I'll check them out soon . Just pulled the driveshaft a min ago . Thanks

**LockDoc** · 11-29-2021, 08:34 PM

Quote:

Originally Posted by 697498chevy

See online NAPA has 2 . One's $27 and one's $60 . I'll check them out soon . Just pulled the driveshaft a min ago . Thanks

I didn't write the numbers down but he had 3 different ones shipped in and let me choose the one I wanted. One was $17, one was $43, and one was $45. I didn't see any difference between the $43 one and the $45 one. He had to look them up in the catalog instead of on the computer.

LockDoc

697498chevy · 12-01-2021, 01:20 PM

Thanks again , Lockdoc . I just pulled the driveshaft bearing with my puller . Plan to take it to NAPA in the morn and see what they have . So far , so good .

697498chevy · 12-02-2021, 04:37 PM

The $60 bearing looked better , so I got it . NAPA HB206FF . Came with 17 mm bolts . Probably the only thing metric on my truck . Haven't fully tightened them as the rear tires are off the ground . Anyone know if it really matters ?? THANKS !

**LockDoc** · 12-02-2021, 11:37 PM

Quote:

Originally Posted by 697498chevy

The $60 bearing looked better , so I got it . NAPA HB206FF . Came with 17 mm bolts . Probably the only thing metric on my truck . Haven't fully tightened them as the rear tires are off the ground . Anyone know if it really matters ?? THANKS !

-
Shouldn't matter. The slip joint will take up any slack.

LockDoc

697498chevy · 12-03-2021, 12:21 PM

Thanks Lockdoc ! I did manage to squeeze under when I took it off the stands and tighten the 17 mm bolts . Been out for a test drive and everything seems good !

**LockDoc** · 12-04-2021, 07:21 PM

Quote:

Originally Posted by 697498chevy

Thanks Lockdoc ! I did manage to squeeze under when I took it off the stands and tighten the 17 mm bolts . Been out for a test drive and everything seems good !

Good deal. Drive the wheels off of it...

LockDoc

11-28-2021, 01:38 PM	#1
697498chevy Registered User Join Date: Jan 2009 Location: South Carolina Posts: 265	1969 C 10 driveshaft carrier bearing After 27 years the rubber in mine is pretty mushy . I see Rock Auto sells just the rubber insert . I plan to replace the whole thing , just curious if anyone has replaced just the rubber insert ? THANKS !

11-28-2021, 03:07 PM	#2
Wrenchbender Ret Registered User Join Date: Oct 2005 Location: Overland Park, Ks. Posts: 5,228	Re: 1969 C 10 driveshaft carrier bearing I used to replace the rubber only years a go when I had a shop. Its better to replace the whole assem. as they are not all that expensive. You can spin the brg & see if it is quite. If so you can just replace the rubber.

11-28-2021, 03:19 PM	#3
697498chevy Registered User Join Date: Jan 2009 Location: South Carolina Posts: 265	Re: 1969 C 10 driveshaft carrier bearing THANKS Wrenchbender ! The whole thing is like $30 , I was just wondering .

11-28-2021, 06:02 PM	#4
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,633	Re: 1969 C 10 driveshaft carrier bearing - I just bought one for my C20 from NAPA. It was $43.00. They had a $17.00 one but it looked pretty crappy. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-29-2021, 03:57 PM	#5
697498chevy Registered User Join Date: Jan 2009 Location: South Carolina Posts: 265	Re: 1969 C 10 driveshaft carrier bearing THANKS Lockdoc . I'll probably get mine at NAPA too .

11-29-2021, 05:53 PM	#6
697498chevy Registered User Join Date: Jan 2009 Location: South Carolina Posts: 265	Re: 1969 C 10 driveshaft carrier bearing See online NAPA has 2 . One's $27 and one's $60 . I'll check them out soon . Just pulled the driveshaft a min ago . Thanks

12-01-2021, 01:20 PM	#8
697498chevy Registered User Join Date: Jan 2009 Location: South Carolina Posts: 265	Re: 1969 C 10 driveshaft carrier bearing Thanks again , Lockdoc . I just pulled the driveshaft bearing with my puller . Plan to take it to NAPA in the morn and see what they have . So far , so good .

12-02-2021, 04:37 PM	#9
697498chevy Registered User Join Date: Jan 2009 Location: South Carolina Posts: 265	Re: 1969 C 10 driveshaft carrier bearing The $60 bearing looked better , so I got it . NAPA HB206FF . Came with 17 mm bolts . Probably the only thing metric on my truck . Haven't fully tightened them as the rear tires are off the ground . Anyone know if it really matters ?? THANKS !

12-03-2021, 12:21 PM	#11
697498chevy Registered User Join Date: Jan 2009 Location: South Carolina Posts: 265	Re: 1969 C 10 driveshaft carrier bearing Thanks Lockdoc ! I did manage to squeeze under when I took it off the stands and tighten the 17 mm bolts . Been out for a test drive and everything seems good !



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.