Body Parts/Frame Needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NPilot1975 · 11-02-2003, 09:35 PM

Well, I have finally finished the chassis and interior for the most part and am going to begin working on the body. I need 67 front fenders, 67 or 68 hood, good short bed fleetside, and a good shortbed frame. I have plenty of time to wait, I am going to be gone for a while, so I want really nice rust free parts. My original from is a shortened longbed frame, so I would prefer to have an actual shortbed frame. My truck is in Indiana now, I am going to be here for about a week and a half. If I am gone, just e-mail me and my brother will pick up the parts. He is willing to travel. Thanx for any help you can give me.

crazy4chevs · 11-03-2003, 12:51 PM

e-mail sent.

stelth2002 · 11-03-2003, 04:40 PM

I have a hood. I'll send ya a pm.

smonty · 11-03-2003, 05:53 PM

Sent you an email.

Ernie

dalejr8 · 11-03-2003, 11:08 PM

I have 2 swb 2wd rolling chassis in Indiana and a complete front end for a 67

junkyardjohn · 11-03-2003, 11:20 PM

I JUST PICKED UP A 72 SWB 2WD COIL SPRUNG TRUCK. $450 FOR EVERYTHING ON THE FRAME UP TO THE STEERING GEARBOX. OR $200 MINUS THE FRONT & REAR 5 LUG SUSPENSION. I'M NOT TOO AWFUL FAR AWAY IN CARSON CITY NEVADA EITHER.

JOHN

**67sss** · 11-03-2003, 11:38 PM

e-mail sent

NPilot1975 · 11-03-2003, 11:55 PM

Dalejr8, how much do you want for the front end and the frame and where are you located in IN. I am right outside of Richmond IN. Also what kind of shape is the frontend in. I am looking for something completely rust free and almost perfectly straight. Let me know, thanx for the help.

LeRoy · 11-04-2003, 12:17 AM

So are you looking for something near Indiana or Washington.

dalejr8 · 11-04-2003, 12:36 AM

Frame is in great shape 350.00 sheetmetal is not rustfree but not to bad either. I am 2 hours nw of Indy, However I am off work this week I could meet you give me a call 219-746-9910 Thanks, Chris. By the way one is 4 coil springs, and one is leaf spring rear, both are disk front brakes.

11-02-2003, 09:35 PM	#1
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Body Parts/Frame Needed Well, I have finally finished the chassis and interior for the most part and am going to begin working on the body. I need 67 front fenders, 67 or 68 hood, good short bed fleetside, and a good shortbed frame. I have plenty of time to wait, I am going to be gone for a while, so I want really nice rust free parts. My original from is a shortened longbed frame, so I would prefer to have an actual shortbed frame. My truck is in Indiana now, I am going to be here for about a week and a half. If I am gone, just e-mail me and my brother will pick up the parts. He is willing to travel. Thanx for any help you can give me. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

11-03-2003, 12:51 PM	#2
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	e-mail sent. __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington .

11-03-2003, 04:40 PM	#3
stelth2002 Young Gun wth Fast Inline Join Date: Jan 2002 Location: Idaho Posts: 1,475	I have a hood. I'll send ya a pm. __________________ 1967 Chevrolet LWB with built 292! 415 ft. lbs of torque, 4 speed :O with 27% overdrive too, 3.73 Posi. Frame and body done... getting painted!!!

11-03-2003, 05:53 PM	#4
smonty Registered User Join Date: Mar 2001 Location: Dallas, TX, USA Posts: 769	Reply Sent you an email. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

11-03-2003, 11:20 PM	#6
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,427	I JUST PICKED UP A 72 SWB 2WD COIL SPRUNG TRUCK. $450 FOR EVERYTHING ON THE FRAME UP TO THE STEERING GEARBOX. OR $200 MINUS THE FRONT & REAR 5 LUG SUSPENSION. I'M NOT TOO AWFUL FAR AWAY IN CARSON CITY NEVADA EITHER. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

11-03-2003, 11:08 PM	#5
dalejr8 WFO-- WIDE F!#@IN OPEN Join Date: Jul 2003 Location: Cedar Lake,In 45min. south of Chicago Posts: 191	I have 2 swb 2wd rolling chassis in Indiana and a complete front end for a 67

11-03-2003, 11:38 PM	#7
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	e-mail sent

11-03-2003, 11:55 PM	#8
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Dalejr8, how much do you want for the front end and the frame and where are you located in IN. I am right outside of Richmond IN. Also what kind of shape is the frontend in. I am looking for something completely rust free and almost perfectly straight. Let me know, thanx for the help. __________________ 1972 Blazer body...need to get a thread started for the rest of the story

11-04-2003, 12:17 AM	#9
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	So are you looking for something near Indiana or Washington. __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

11-04-2003, 12:36 AM	#10
dalejr8 WFO-- WIDE F!#@IN OPEN Join Date: Jul 2003 Location: Cedar Lake,In 45min. south of Chicago Posts: 191	Frame is in great shape 350.00 sheetmetal is not rustfree but not to bad either. I am 2 hours nw of Indy, However I am off work this week I could meet you give me a call 219-746-9910 Thanks, Chris. By the way one is 4 coil springs, and one is leaf spring rear, both are disk front brakes. Last edited by dalejr8; 11-04-2003 at 12:45 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.