Super Cheyenne aka the "Devil Cowboy"

[landarts]

Here are a few more of the areas with some SEM black filler primer after going over the areas a few times. Just wrapping up a few more small items on the outside of the cab. Then moving on to the four or five items that need to be addressed inside the cab before I can get this into primer and paint.

Also fixed a grill guard that was bent up on one of the two K10 trucks I bought out of Montana. That was a quick thirty-minute repair with a piece of 3/8 flat bar stock. Now it is straight and squared up to the grill, like the other side. Now it just needs to patina a little to match the rest.

I had to make a trip back to the transmission/transfer case shop to pick up the proper shifting part that goes on the side of the TH350 for a 72 4x4. While I was there he had my transfer case which I also dropped off to get rebuilt, and had JB Customs twin sticks installed. This transfer case is for my Idaho Edition truck. Now the truck will not have a leaking transfer case and it gives me 2WD high and low as well as 4WD high and low.