new doors!

[Tod P]

I need to replace the doors and tailgate on my '72 GMC K1500. Are NOS parts available? I'm afraid there is a wide range of quality in the aftermarket parts out there. I wan't to minimize fitment issues. Any suggestions? LMC? Brothers? Auto Metal Direct?

Thanks for your help.

[sameyrasmea72]

The last NOS door I saw was listed for $900 and NOS tailgates are about the same $$. I would look for good used ones, whick might be difficult to find in your area. I have never used aftermarket stuff, so I can't help there.

[skidder111]

I got two new doors from Offshore in Lethbridge. The fitment was less than perfect but they worked. Good luck.

[justincat]

Definatly try to find some good used ones. I got some triplus doors for my 67, and in order to make them fit I had to cut the door frame down, and bend it outwards. I also have an aftermarket tailgate. It fit better than the doors but still not perfect. They will work but be prepared when they dont fit like you want.

[Classic Heartbeat]

I need to replace the doors and tailgate on my '72 GMC K1500. Are NOS parts available? I'm afraid there is a wide range of quality in the aftermarket parts out there. I wan't to minimize fitment issues. Any suggestions? LMC? Brothers? Auto Metal Direct?

I have yet to see reproduction doors that meet my standards. I have tried all different manufacturers and they all have enough issues that I always advise my customers to fix what they have. We have the panels to do so and the results are better if you fis rather than repair. So if yours are shot..., then I would be on the hunt for good used doors. At least good repairable doors. WES

[CG]

Originally Posted by Classic Heartbeat

I have yet to see reproduction doors that meet my standards. I have tried all different manufacturers and they all have enough issues that I always advise my customers to fix what they have. We have the panels to do so and the results are better if you fis rather than repair. So if yours are shot..., then I would be on the hunt for good used doors. At least good repairable doors. WES

There ya go, if a vendor tells you to stay away from the repro doors its probably a good idea to take his advise.

For the cost of a one NOS door you could have two stock doors made pristine by a good body guy.

[Fldawg]

You might give this guy a try he specalizes in nos stuff

Kelly's classic auto supply phone# 1 800 old cars

bought inner fenders for my 70 c10 nos but the cost was $400

[Tod P]

Thanks for the replies fellas. I've been offered some used doors, so I will pursue that.

[454stepside]

never bought new doors but did get a fender from lmc a long time ago when i was still young and dumb lets just say it was fun running it over with my truck after i did some work to it and it didn't fit STAY AWAY FROM LMC BODY PANELS

[C10-Driver]

I am in Kelowna and have a set of original rust-free doors that have been restored (ready for high-build and final block sand) and also have a "mint" tailgate. Shoot me your email and I can send you some pics and info.

[Tod P]

Thanks C-10 Driver. I sent you a PM.