Anyone installed 3M DI-NOC Vinyl Film? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**D.PASSMORE** · 01-15-2014, 11:17 PM

I'm going to wrap some speaker boxes this weekend with 3M DI-NOC carbon Film. Just looking for advice / tips on this application. Looked on you tube and seen a few videos, but nothing on a box shape. I'll post some pictures later - or maybe not if it gets ugly...

Thanks

**71blksuper4x4** · 01-15-2014, 11:43 PM

You will want to use a heat gun on a low setting to get it pliable, but don't heat to much or it will stretch thin. The primer 94 is good for curves and getting a good bond, I don't use it on flat pieces. Good luck, there is some learning curve to it. Trevor

**D.PASSMORE** · 01-16-2014, 08:54 AM

I got the 94 primer and the heat gun and squegies. Good to know about low heat. It appeared that they putting the heat to it in the videos.

**D.PASSMORE** · 01-20-2014, 01:32 PM

Anyone else...

01-15-2014, 11:17 PM	#1
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Anyone installed 3M DI-NOC Vinyl Film? I'm going to wrap some speaker boxes this weekend with 3M DI-NOC carbon Film. Just looking for advice / tips on this application. Looked on you tube and seen a few videos, but nothing on a box shape. I'll post some pictures later - or maybe not if it gets ugly... Thanks __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

01-15-2014, 11:43 PM	#2
71blksuper4x4 SWB 4x4 Collector Join Date: Jun 2001 Location: Osage City, KS Posts: 5,151	Re: Anyone installed 3M DI-NOC Vinyl Film? You will want to use a heat gun on a low setting to get it pliable, but don't heat to much or it will stretch thin. The primer 94 is good for curves and getting a good bond, I don't use it on flat pieces. Good luck, there is some learning curve to it. Trevor __________________ TREVOR 1970 CST swb 4x4 (speedwarning,cruise,tilt,tach,8track, original red shoulder belts,tow hooks) 1972 Jimmy (soon to be Hickey cloned) 1971 Cheyenne Super 4x4 swb (tilt,tach,buckets, original blue shoulder belts,am/fm,cruise,tow hooks, dealer 8 track) 1972 Cheyenne Super K20 4x4 Custom Camper (tilt, tach, am/fm, tow hooks, bed toolbox, aux gas tank 1972 Cheyenne Super Crew Cab K30 4x4 Duramax, Allison, np205, buckets, tow hooks (CURRENT PROJECT) http://67-72chevytrucks.com/vboard/s...d.php?t=624819 1989 V3500 Crew Cab (454tbi, NV4500, np205) 1970 Chevelle SS (LS5 454,th400,8track,buckets,tach) :2004 Jeep Wrangler Rubicon (daily driver) WTB: 1968-70 Cruise Control Lever

01-16-2014, 08:54 AM	#3
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: Anyone installed 3M DI-NOC Vinyl Film? I got the 94 primer and the heat gun and squegies. Good to know about low heat. It appeared that they putting the heat to it in the videos.

01-20-2014, 01:32 PM	#4
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: Anyone installed 3M DI-NOC Vinyl Film? Anyone else... __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.