Who has these? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

In The Ten Ring · 07-18-2015, 10:36 PM

I removed my headlights from my old core support tonight and I broke one of these "clips" in the process. Where can I find these little white clips that the headlight adjustment screws thread into?

Saclandman · 07-18-2015, 11:08 PM

I ordered mine from LMC I believe. I think GMC Paul has them as well.

**Grumpy old man** · 07-18-2015, 11:14 PM

Dorman part # 42135 most any auto parts store

Willie Makeit · 07-18-2015, 11:16 PM

Lowe's. Go to the hardware section and they should have an entire aisle with those little slide out drawer cabinets filled with all sort of fasteners and clips. Bought multiple different sizes at my local Lowes for everything from headlights, door panels to arm rests. Look for the Hillman name.

Much less expensive than ordering too.

**leddzepp** · 07-19-2015, 02:06 AM

Quote:

Originally Posted by Willie Makeit

Lowe's. Go to the hardware section and they should have an entire aisle with those little slide out drawer cabinets filled with all sort of fasteners and clips. Bought multiple different sizes at my local Lowes for everything from headlights, door panels to arm rests. Look for the Hillman name.

Much less expensive than ordering too.

Yep, Home Depot and ace hardware have them as well. Your local parts house will have them as grumpy pointed out, so pick the place closest to you.

**Jurassic-1** · 07-19-2015, 12:20 PM

Auto parts store. License plate nuts work if you can not locate others.

**LockDoc** · 07-19-2015, 01:29 PM

-
Just for information, the '67 through early '69 are different. Here is a picture of them.... They fit in from the back and stand out from the core support. The replacements you guys pictured may still work but it seems like you would have to have longer bolts... dunno

LockDoc

Redline novdog · 07-19-2015, 07:09 PM

Thanks LockDoc ! Does anyone sell these!

racerop · 07-19-2015, 07:23 PM

Quote:

Originally Posted by LockDoc

-
Just for information, the '67 through early '69 are different. Here is a picture of them.... They fit in from the back and stand out from the core support. The replacements you guys pictured may still work but it seems like you would have to have longer bolts... dunno

LockDoc

subscribed I have been looking for these too . I have an 89 isuzu trooper that I broke the plastic nuts just by removing the headlamp buckets. I probably will do the same when I pull them from my 71 k20.

**LockDoc** · 07-19-2015, 08:26 PM

Quote:

Originally Posted by Redline novdog

Thanks LockDoc ! Does anyone sell these!

Quote:

Originally Posted by racerop

subscribed I have been looking for these too . I have an 89 isuzu trooper that I broke the plastic nuts just by removing the headlamp buckets. I probably will do the same when I pull them from my 71 k20.

I think I have a few of these left...

http://67-72chevytrucks.com/vboard/s...d.php?t=566960

LockDoc

07-18-2015, 10:36 PM	#1
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Who has these? I removed my headlights from my old core support tonight and I broke one of these "clips" in the process. Where can I find these little white clips that the headlight adjustment screws thread into?

07-18-2015, 11:08 PM	#2
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: Who has these? I ordered mine from LMC I believe. I think GMC Paul has them as well. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

07-18-2015, 11:14 PM	#3
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: Who has these? Dorman part # 42135 most any auto parts store

07-18-2015, 11:16 PM	#4
Willie Makeit Registered User Join Date: Oct 2013 Location: Alabama Posts: 1,224	Re: Who has these? Lowe's. Go to the hardware section and they should have an entire aisle with those little slide out drawer cabinets filled with all sort of fasteners and clips. Bought multiple different sizes at my local Lowes for everything from headlights, door panels to arm rests. Look for the Hillman name. Much less expensive than ordering too. Attached Images

07-19-2015, 12:20 PM	#6
Jurassic-1 Registered User Join Date: Jul 2007 Location: New River Arizona Posts: 1,180	Re: Who has these? Auto parts store. License plate nuts work if you can not locate others.

07-19-2015, 01:29 PM	#7
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,593	Re: Who has these? - Just for information, the '67 through early '69 are different. Here is a picture of them.... They fit in from the back and stand out from the core support. The replacements you guys pictured may still work but it seems like you would have to have longer bolts... dunno LockDoc Attached Images __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

07-19-2015, 07:09 PM	#8
Redline novdog Registered User Join Date: Jan 2012 Location: Washington,Il Posts: 632	Re: Who has these? Thanks LockDoc ! Does anyone sell these! __________________ It builds on my intelligence when I make a mistake, Boy am I building on it! '67 C-10,'70 Nova SS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.