fuel pump return line? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low 84 · 07-04-2003, 01:07 PM

ok i'm changing my truck over from the stock style pump that uses a return line to a holley mechanical pump. one of the hard lines that runs from the tank to the pump is big and one is small. am i right in guessing the big line is the feed and the small line is the return?

BigRed · 07-04-2003, 01:51 PM

Sounds right to me. However I'm not positive. It makes no sense that they would run the larger line as the return.

*mike reeh* · 07-04-2003, 02:50 PM

if you only have two lines running from the tanks, then you probably dont have a return line. The smaller one is probably the vent. Does it go directly to the fuel pump or to the charcoal canister?

Is your stock fuel pump a 2 port or 3 port? If its a 3 port, it should have a return. 2 ports are just input from tank, and output to carb.

mike

low 84 · 07-04-2003, 07:46 PM

Quote:

Originally posted by mike reeh
if you only have two lines running from the tanks, then you probably dont have a return line. The smaller one is probably the vent. Does it go directly to the fuel pump or to the charcoal canister?

Is your stock fuel pump a 2 port or 3 port? If its a 3 port, it should have a return. 2 ports are just input from tank, and output to carb.

mike

yes i have a three port pump, and inlet outlet and return, i also had the vent line which i removed becuase i'm not running any emmsions equipment. the small line that connects to the fuel pump is the same size as the vent line was and then there is a bigger line goin to the fuel pump aswell. so i'm guessing this is the feed which is the only one i need to keep?

*mike reeh* · 07-04-2003, 08:04 PM

Hmm the two smaller lines are the same size? I find that hard to beleive. There should be a 3/8" which is feed, 5/16" which is the vent and believe it or not the 1/4" is the return. Things may have changed slightly over the years though. This IS general motors we're talking about, and just about anything is possible.

mike

low 84 · 07-04-2003, 11:29 PM

mabey i mistaked the 3/8 and 5/16 as the same size. but the 1/4 is the return? i just cut off the wrong line then, lol

07-04-2003, 01:07 PM	#1
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	fuel pump return line? ok i'm changing my truck over from the stock style pump that uses a return line to a holley mechanical pump. one of the hard lines that runs from the tank to the pump is big and one is small. am i right in guessing the big line is the feed and the small line is the return? __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

07-04-2003, 01:51 PM	#2
BigRed Registered User Join Date: Jun 2002 Location: DFW, TX Posts: 1,680	Sounds right to me. However I'm not positive. It makes no sense that they would run the larger line as the return. __________________ Scott Shelbourne

07-04-2003, 11:29 PM	#6
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	mabey i mistaked the 3/8 and 5/16 as the same size. but the 1/4 is the return? i just cut off the wrong line then, lol __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

07-04-2003, 02:50 PM	#3
mike reeh 5 day ban, learn to behave. Join Date: Nov 2002 Location: san diego, ca Posts: 684	if you only have two lines running from the tanks, then you probably dont have a return line. The smaller one is probably the vent. Does it go directly to the fuel pump or to the charcoal canister? Is your stock fuel pump a 2 port or 3 port? If its a 3 port, it should have a return. 2 ports are just input from tank, and output to carb. mike

07-04-2003, 08:04 PM	#5
mike reeh 5 day ban, learn to behave. Join Date: Nov 2002 Location: san diego, ca Posts: 684	Hmm the two smaller lines are the same size? I find that hard to beleive. There should be a 3/8" which is feed, 5/16" which is the vent and believe it or not the 1/4" is the return. Things may have changed slightly over the years though. This IS general motors we're talking about, and just about anything is possible. mike



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.