AN PTFE Hose, AN PTFE Hose SALE

[HotRodfuelhose]

Hey Guys;

As always thank you so much for the support here on this forum. This is a solid group of guys interested in the same stuff we are - building cool vehicles.

We have decided to keep the TRUCK10 discount code active for this forum going forward so you save 10% off on any orders over $50.00 of PTFE lined and braided hose from http://www.hotrodfuelhose.com

New stuff that has been happening with Hot Rod fuel hose.

Bigger sizes of AN PTFE hose in black - 8AN, and 10AN with black fittings now available. Perfect for higher HP applications, diesel transmission lines ect.
Lot's of stock on 6AN black which has been our most popular product for EFI swaps and LSx engine installs.

We have gotten some new reviews in on our product and service. Be sure to check them out here.

If you guys have any questions feel free to post away.

Thanks again for the support.

[HotRodfuelhose]

Hey guys AN6 black continues to be the most popular color, we have just over 30ft remaining and it will be at least the first week of March until we are restocked.

Thanks again for the support.

[HotRodfuelhose]

Originally Posted by HotRodfuelhose

Hey guys AN6 black continues to be the most popular color, we have just over 30ft remaining and it will be at least the first week of March until we are restocked.

Thanks again for the support.

Sorry guys we are pretty much sold out of all AN6 options - we have blue or red hose remaining & we have blue/red fittings left.

AN8/AN10 in black is available.

Some good news however is we should be ready to list a ton of new products soon. Looking to become your favorite aftermarket parts supplier!

[NC_John]

Originally Posted by HotRodfuelhose

Sorry guys we are pretty much sold out of all AN6 options - we have blue or red hose remaining & we have blue/red fittings left.

AN8/AN10 in black is available.

Some good news however is we should be ready to list a ton of new products soon. Looking to become your favorite aftermarket parts supplier!

Can you build a returnless LS kit in AN-8, all black?

[HotRodfuelhose]

Originally Posted by NC_John

Can you build a returnless LS kit in AN-8, all black?

Yes we can, if you like send an email to us, info@hotrodfuelhose.com and we can get that setup for you.

Thanks

[NC_John]

Originally Posted by HotRodfuelhose

Yes we can, if you like send an email to us, info@hotrodfuelhose.com and we can get that setup for you.

Thanks

email sent (yesterday)

thank you

[Hidesertchevy]

Is the black 6an back in stock ?

[HotRodfuelhose]

Originally Posted by Hidesertchevy

Is the black 6an back in stock ?

We are in stock now, the black fittings arrived on Saturday.

Thanks to everyone for your patience.

[HotRodfuelhose]

Originally Posted by HotRodfuelhose

We are in stock now, the black fittings arrived on Saturday.

Thanks to everyone for your patience.

We did run out of an8 90 degree fittings, the rest are still available.

[chevyguy_72]

Just wanted to say this is good nice quality product with excellent support behind it...

[HotRodfuelhose]

Originally Posted by chevyguy_72

Just wanted to say this is good nice quality product with excellent support behind it...

Thanks for sharing & support!

[HotRodfuelhose]

Well that didn't last very long, despite ordering a ton of inventory we have sold out of most pcs at this point. We are now putting folks on a waiting list please pm if you would like to be added.

[NC_John]

Shout-out for Justin. I had an issue with a couple fittings and he made it right IMMEDIATELY. Very solid guy.

[HotRodfuelhose]

Originally Posted by NC_John

Shout-out for Justin. I had an issue with a couple fittings and he made it right IMMEDIATELY. Very solid guy.

Thanks John

[HotRodfuelhose]

Huge News, we are fully stocked up guys.

New products include pumps, regulators, adapter fittings and more.

Thanks for the support guys.

[HotRodfuelhose]

An10 almost oos.

[HotRodfuelhose]

Hey guys here is some installation tips from a customer specifically related to the black and colored hose. The clearances are tight on purpose which makes then a bit tough to install but so worth it in the end.

https://hotrodfuelhose.com/blogs/rad...rom-a-customer

Have a great week everyone.

[HotRodfuelhose]

Black with blue check ptfe AN hose bundles are now available. My favorite new color.
Bundles come with 8 fittings and offer great value.

http://https://hotrodfuelhose.com/collections/bundles/products/black-with-blue-checks-an6-ptfe-lined-hose-and-8-fittings-bundle-deal

Have a great week.

[HotRodfuelhose]

Hey guys,

We we're out of stock for a week or so but everything is available again.

[michael bustamante]

im running the return fuel system from my ls. (5.3 from 2003 Yukon) the hard lines from the dual lines on the motor to where the turn to soft line are still there, can I tap into the hard lines or should I run all braided? also, how do I figure what fittings ill need from you guys, (all black of course)
all AN6

[HotRodfuelhose]

Originally Posted by michael bustamante

im running the return fuel system from my ls. (5.3 from 2003 Yukon) the hard lines from the dual lines to where the turn to soft line are still there, can I tap into the hard lines or should I run all braided? also, how do I figure what fittings ill need from you guys, (all black of course)

Hey Michael,

It's really personal preference on if you would like to utilize the hardline or run all braided.

I'm not sure what vehicle you are swapping the LS into but depending on if you have threaded fittings, quick connect, or bubble flares would determine the adapters.needed to convert to AN.

If you decide to run braided the whole way we have LS swap kits that include most of what is needed with the exception of the adpaters to the sending unit. You can read up on that here.

https://hotrodfuelhose.com/blogs/rad...-for-fuel-line

Thanks
Justin

[HotRodfuelhose]

Any suggestions for new products guys?

[HotRodfuelhose]

AN8 straight black is currently out of stock, availability mid October.

[HotRodfuelhose]

New hose color coming soon