SLOSH TUBZ SQUARED... sneak peek - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67cheby** · 10-05-2011, 09:55 AM

still in the rough stages grafting the parts together just thought i would throw up a couple pics to get some feedback. If you havent seen my stuff i am building bolt in inner fenders for frame laying C10's , check this out and let me know what you think

J Knight · 10-05-2011, 11:46 AM

Is it fiberglass? If so, very cool.
Posted via Mobile Device

**N2TRUX** · 10-05-2011, 11:53 AM

I can't believe you didn't mention these this weekend. It was a real pleasure to meet you and your pretty wife. Keep us in the loop on your progress.

**67cheby** · 10-05-2011, 11:54 AM

yes they will be fiberglass, the manufacturing company that i am using build semi noses and fenders !

**67cheby** · 10-05-2011, 11:56 AM

Quote:

Originally Posted by N2TRUX

I can't believe you didn't mention these this weekend. It was a real pleasure to meet you and your pretty wife. Keep us in the loop on your progress.

I cant believe i didnt either ! It was great meeting you also , i would have to say you are just as nice and just as helpful in person as you are on this board ..THANK YOU, that is the kind of people i like to say i know !!

Hevy · 10-05-2011, 12:15 PM

How hard is it working on the engine with two of those installed? Looks like it would be pretty tight.

SCOTI · 10-05-2011, 12:17 PM

If I might make one suggestion..... Is there a way to eliminate the 'gap' @ the top of the fender where they meet?

J Knight · 10-05-2011, 12:17 PM

Looks very similar to WTI fiberglass fenders for big trucks. I had some on two of my Peterbilts.
Posted via Mobile Device

**67cheby** · 10-05-2011, 12:23 PM

all gaps will be smoothed out , this is just the start of molding them together ! just a sneak peek in a rough stage of there development !! as for tighteness in the engine compartment they are a little narrower than the factory ones

**67cheby** · 10-05-2011, 12:26 PM

they will look more like the 67-72 ones when they are done ....SUPER SMOOTH, this is a pic of the 67-72 for those of you who havent seen them yet

SCOTI · 10-05-2011, 01:04 PM

Quote:

Originally Posted by 67cheby

all gaps will be smoothed out , this is just the start of molding them together ! just a sneak peek in a rough stage of there development !! as for tighteness in the engine compartment they are a little narrower than the factory ones

This is what I'm referring to....

**N2TRUX** · 10-05-2011, 01:20 PM

Scot, those pictured are just setting in place over the stock tub with the inner fender still intact. Once the fender is cut out they will fit flush. Take a look at the link in his sig.

overloaded · 10-05-2011, 01:21 PM

Quote:

Originally Posted by 67cheby

they will look more like the 67-72 ones when they are done ....SUPER SMOOTH, this is a pic of the 67-72 for those of you who havent seen them yet

Even though I'm not into lowered trucks, I can really respect the work you're putting into this. Nice stuff!

**67cheby** · 10-05-2011, 01:29 PM

to answer your question Scoti...that will be gone on these they have to stay right under the fender chanel to clear the bottom of the hood, so no step up on these !

**67cheby** · 10-05-2011, 01:30 PM

Quote:

Originally Posted by overloaded

Even though I'm not into lowered trucks, I can really respect the work you're putting into this. Nice stuff!

thank you !!

JNJchev77 · 10-05-2011, 01:41 PM

They look great Cheb!! Nice work so far... These will be compatible with all years correct, including 73-80? I'm not sure if there is a difference between inner fenders for early and later models, is why I ask...

**67cheby** · 10-05-2011, 02:00 PM

i am building them on a 80-87 front clip, as far as i know the only difference is the placement of some of the holes ! BUT....you guys probably know this better than me , any input anyone if the factory inner fenders work in the older body style also ??

SBTork · 10-05-2011, 05:32 PM

AWESOME!!

I loved seeing your process on the 67-72 truck ones, excellent work indeed. Consider one set sold already. I have been looking for a decent alternative to "trailer fenders" for my suburban and now have one. I've seen one set installed on a 67-72 'burb over in their section and the quality is second to none, perfect. Can't wait man!!

Don't take this as me rushing you, but when do you think the first production run will be? Also, will your pricing be in-line with what the 67-72 ones are? I will have to set aside some cash for a set.

**67cheby** · 10-05-2011, 06:02 PM

yes the pricing should stay the same , hope to be selling by the end of the year or the end of Jan at the latest

SCOTI · 10-05-2011, 06:46 PM

I'll keep watching this thread. I would likely be interested in some for the dually if it ever get's to the point of needing some.

**67cheby** · 10-05-2011, 06:49 PM

LOL...i hope it gets there !!

SCOTI · 10-05-2011, 06:54 PM

Quote:

Originally Posted by 67cheby

LOL...i hope it gets there !!

Right now, it's just going to be a 5/7 drop so they shouldn't be required.

I will most likely limit it to that drop just because I have other vehicles & it's supposed to be the 'work-horse', not the show ride. But, I'm young enough to know, never say never....

**67cheby** · 10-05-2011, 06:55 PM

LOL...i understand , my truck was just going to be a 5-7 drop

juiceman650 · 10-05-2011, 09:20 PM

These should be awesome when finished.
Posted via Mobile Device

**67cheby** · 10-05-2011, 09:36 PM

thanks man ...i hope everyone will like them

10-05-2011, 09:55 AM	#1
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	SLOSH TUBZ SQUARED... sneak peek still in the rough stages grafting the parts together just thought i would throw up a couple pics to get some feedback. If you havent seen my stuff i am building bolt in inner fenders for frame laying C10's , check this out and let me know what you think Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-05-2011, 11:46 AM	#2
J Knight Registered User Join Date: Jun 2011 Location: Baytown TX Posts: 2,219	Re: SLOSH TUBZ SQUARED... sneak peek Is it fiberglass? If so, very cool. Posted via Mobile Device __________________ John 82 Chevy Silverado 350ci/TH350

10-05-2011, 11:53 AM	#3
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: SLOSH TUBZ SQUARED... sneak peek I can't believe you didn't mention these this weekend. It was a real pleasure to meet you and your pretty wife. Keep us in the loop on your progress. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

10-05-2011, 11:54 AM	#4
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: SLOSH TUBZ SQUARED... sneak peek yes they will be fiberglass, the manufacturing company that i am using build semi noses and fenders ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-05-2011, 12:15 PM	#6
Hevy Registered User Join Date: Aug 2011 Location: Phoenix, AZ Posts: 91	Re: SLOSH TUBZ SQUARED... sneak peek How hard is it working on the engine with two of those installed? Looks like it would be pretty tight.

10-05-2011, 12:17 PM	#7
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: SLOSH TUBZ SQUARED... sneak peek If I might make one suggestion..... Is there a way to eliminate the 'gap' @ the top of the fender where they meet? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-05-2011, 12:23 PM	#9
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: SLOSH TUBZ SQUARED... sneak peek all gaps will be smoothed out , this is just the start of molding them together ! just a sneak peek in a rough stage of there development !! as for tighteness in the engine compartment they are a little narrower than the factory ones __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-05-2011, 12:26 PM	#10
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: SLOSH TUBZ SQUARED... sneak peek they will look more like the 67-72 ones when they are done ....SUPER SMOOTH, this is a pic of the 67-72 for those of you who havent seen them yet Attached Images __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-05-2011, 01:20 PM	#12
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: SLOSH TUBZ SQUARED... sneak peek Scot, those pictured are just setting in place over the stock tub with the inner fender still intact. Once the fender is cut out they will fit flush. Take a look at the link in his sig. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

10-05-2011, 01:29 PM	#14
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: SLOSH TUBZ SQUARED... sneak peek to answer your question Scoti...that will be gone on these they have to stay right under the fender chanel to clear the bottom of the hood, so no step up on these ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-05-2011, 01:41 PM	#16
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Re: SLOSH TUBZ SQUARED... sneak peek They look great Cheb!! Nice work so far... These will be compatible with all years correct, including 73-80? I'm not sure if there is a difference between inner fenders for early and later models, is why I ask... __________________ 77' Chevy SB Dropmembered Front and Rear 5.3/4l60e combo

10-05-2011, 02:00 PM	#17
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: SLOSH TUBZ SQUARED... sneak peek i am building them on a 80-87 front clip, as far as i know the only difference is the placement of some of the holes ! BUT....you guys probably know this better than me , any input anyone if the factory inner fenders work in the older body style also ?? __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-05-2011, 05:32 PM	#18
SBTork Garage wrench Join Date: Feb 2008 Location: LaCrosse, WI Posts: 1,855	Re: SLOSH TUBZ SQUARED... sneak peek AWESOME!! I loved seeing your process on the 67-72 truck ones, excellent work indeed. Consider one set sold already. I have been looking for a decent alternative to "trailer fenders" for my suburban and now have one. I've seen one set installed on a 67-72 'burb over in their section and the quality is second to none, perfect. Can't wait man!! Don't take this as me rushing you, but when do you think the first production run will be? Also, will your pricing be in-line with what the 67-72 ones are? I will have to set aside some cash for a set. __________________ -Adam 90 V1500 GMC Suburban 350/700R4/NP241..... 01 Saturn SL1 stock DD.....

10-05-2011, 06:02 PM	#19
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: SLOSH TUBZ SQUARED... sneak peek yes the pricing should stay the same , hope to be selling by the end of the year or the end of Jan at the latest __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-05-2011, 06:46 PM	#20
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: SLOSH TUBZ SQUARED... sneak peek I'll keep watching this thread. I would likely be interested in some for the dually if it ever get's to the point of needing some. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*



Register or Log In To remove these advertisements.

10-05-2011, 06:49 PM	#21
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: SLOSH TUBZ SQUARED... sneak peek LOL...i hope it gets there !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-05-2011, 06:55 PM	#23
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: SLOSH TUBZ SQUARED... sneak peek LOL...i understand , my truck was just going to be a 5-7 drop __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-05-2011, 09:20 PM	#24
juiceman650 Registered User Join Date: Jan 2011 Location: San Bruno, CA. Posts: 348	Re: SLOSH TUBZ SQUARED... sneak peek These should be awesome when finished. Posted via Mobile Device __________________ 1975 Chevy Cheyenne w/ v8 350 and TH350 Siverado interior Fleetside bed aka "The Beast" aka "Cheyerado"

10-05-2011, 09:36 PM	#25
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: SLOSH TUBZ SQUARED... sneak peek thanks man ...i hope everyone will like them __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.