Buddy bucket question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

HuggerCST · 04-17-2010, 04:08 PM

I have two sets. The backs on one set fold forward, and on the other set, they dont. Is that normal, or are they all supposed to fold forward?

**too much stuff** · 04-17-2010, 04:12 PM

This has been covered on here before. It seems some folded and some didn't. I don't think we ever came up with a conclusion as to why. I have also seen them both ways...

67_C-30 · 04-17-2010, 05:40 PM

Quote:

Originally Posted by too much stuff

This has been covered on here before. It seems some folded and some didn't. I don't think we ever came up with a conclusion as to why. I have also seen them both ways...

X2 The set I have for my dually fold.

dan42 · 04-17-2010, 05:51 PM

Mine don't fold - they're from a '67 if that matters.

**PICKMUP** · 04-17-2010, 06:13 PM

The seat covers stay in place and fit a lot better if you DON'T fold them forward. I recommend if they fold forward, you tach weld them so they won't. I know that sounds harsh, but when they pull out at the hinge point and wrinkle up...they look terrible.

67_C-30 · 04-17-2010, 08:43 PM

Quote:

Originally Posted by PICKMUP

The seat covers stay in place and fit a lot better if you DON'T fold them forward. I recommend if they fold forward, you tach weld them so they won't. I know that sounds harsh, but when they pull out at the hinge point and wrinkle up...they look terrible.

Good to know. Really good to know this before upholstery! Thanks!

**Hart_Rod** · 04-17-2010, 11:27 PM

Quote:

Originally Posted by 67_C-30

Good to know. Really good to know this before upholstery! Thanks!

If you decide to weld them, make sure you have them adjusted in the position you want. You could also tighten the pivot bolt up to make them really hard to move.

HuggerCST · 04-18-2010, 12:06 AM

Quote:

Originally Posted by 67_C-30

Good to know. Really good to know this before upholstery! Thanks!

I agree! Thanks guys!

67_C-30 · 04-18-2010, 12:14 AM

Quote:

Originally Posted by Hart_Rod

If you decide to weld them, make sure you have them adjusted in the position you want. You could also tighten the pivot bolt up to make them really hard to move.

Yeah, I probably wouldn't weld them anyway. I'd make something that I could remove to keep it stationary.

04-17-2010, 04:08 PM	#1
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Buddy bucket question I have two sets. The backs on one set fold forward, and on the other set, they dont. Is that normal, or are they all supposed to fold forward? __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

04-17-2010, 04:12 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,764	Re: Buddy bucket question This has been covered on here before. It seems some folded and some didn't. I don't think we ever came up with a conclusion as to why. I have also seen them both ways... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

04-17-2010, 05:51 PM	#4
dan42 Registered User Join Date: Feb 2007 Location: Cali Central Coast Posts: 5,191	Re: Buddy bucket question Mine don't fold - they're from a '67 if that matters. __________________ '67 SWB Fleetside ZZ4/350/Tremec 5-speed/4link/Scott's IFS - and fun as heck! SOLD Click here to support the board Philippians 4: 6-7

04-17-2010, 06:13 PM	#5
PICKMUP "Trucks with Class" Join Date: Jul 2000 Location: OLYMPIA, WA, USA Posts: 8,139	Re: Buddy bucket question The seat covers stay in place and fit a lot better if you DON'T fold them forward. I recommend if they fold forward, you tach weld them so they won't. I know that sounds harsh, but when they pull out at the hinge point and wrinkle up...they look terrible.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.