The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-29-2018, 04:11 PM   #1
Judgeyoung
Registered User
 
Judgeyoung's Avatar
 
Join Date: Apr 2017
Location: Abilene, TX
Posts: 6
Quick and easy hubcap masking/restoration

OK, I got my wheels painted white on my old 72 C2500 which made the old caps look terrible ( Yes, I know. I am still looking for a nice set of GMC's I can afford!) . I was going to polish them and repaint the insets, but was dreading the taping. I read about guys using 1/8" tape, etc and it taking over an hour a wheel. I knew there must be an easier way. I found it!

I practiced on this old cap. I bought some cheap 2" masking tape and pealed off enough to cover one 'window'. I applied it and rand my finger around the edge of the 'window' to insure that it seated in the pressed edge fully.

I then took my sharp pocket knife and ran it around the pressed edge. It followed the edge perfectly. Then I just pealed the inset section out. VIOLA! perfect taping in about 10 seconds!

Obviously you have to repeat on all the sections you are restoring and mask off the other areas of the cap. Your cap may contain issues that make this less effective, but for me, it was quick, cheap, and easy!!!!

I hope this helps others!
Attached Images
    
Judgeyoung is offline   Reply With Quote
Old 11-29-2018, 05:20 PM   #2
Chris_oz
Registered User
 
Chris_oz's Avatar
 
Join Date: Sep 2018
Location: Newcastle, New South Wales, Australia
Posts: 139
Re: Quick and easy hubcap masking/restoration

neat idea and thanks for sharing.

I have a '70 which should have blue bowties, but has later yellow caps, not sure what year, they are fair condition, but I was thinking about polishing them and repaint with the blue.

I am looking for a set of 1970 C20 caps, but they are not cheap or plentiful.
Chris_oz is offline   Reply With Quote
Old 11-29-2018, 06:05 PM   #3
Easttennceeten
Registered User
 
Join Date: Nov 2018
Location: Sweetwater, TN
Posts: 14
Re: Quick and easy hubcap masking/restoration

I used the same basic technique on my hubcaps. I wanted to leave them looking a little rough to go with the patina I'll be doing on the truck, so I just left the dents and over spray cover rattle can white the PO did and just painted the black ring & bowtie.
Attached Images
 
__________________
_______________________________________________________________

'69 C10 lwb stepside
Easttennceeten is offline   Reply With Quote
Reply

Bookmarks

Tags
hubcap, masking, paint, restore, wheel


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:57 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com