Tubbing Bed Questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1970ChevyChamp · 05-21-2012, 10:14 PM

Hey all, I am buillding a '67 shortbed and I am aiming for a pro-street look. I am aware that in order to achieve this I will need to tub the rear fender wells to fit some wider tires back there. My question is how??? What are some good ways or techniques to get this done. I searched on here looking for a thread to help me out and was unsuccessful finding what I wanted (might have been operator error). If you guys could point me in the right direction I would really appreciate it!!

**68bowtie** · 05-21-2012, 10:51 PM

http://67-72chevytrucks.com/vboard/s...d.php?t=161189

http://67-72chevytrucks.com/vboard/s...d.php?t=524400

Here are a couple. I know there are others. Just be sure to use the bigger piece of each tub so you have one seam instead of two...
Posted via Mobile Device
Posted via Mobile Device

**68bowtie** · 05-21-2012, 10:59 PM

Heres the one i was looking for. page 2 of this thread...

http://67-72chevytrucks.com/vboard/s...=322819&page=2
Posted via Mobile Device

cdowns · 05-22-2012, 08:01 AM

i'd think you'd first b more concerned about building the rear frame half and suspension// once that is solved you can go about mounting the bed and clearancing the wheels

1970ChevyChamp · 05-22-2012, 11:12 AM

Quote:

Originally Posted by cdowns

i'd think you'd first b more concerned about building the rear frame half and suspension// once that is solved you can go about mounting the bed and clearancing the wheels

What do you mean by that? As far as building it up.
Posted via Mobile Device

**68bowtie** · 05-22-2012, 01:11 PM

Depends on the tire size your using. You can fit a lot of tire in there without frame mods.
Posted via Mobile Device

1970ChevyChamp · 05-22-2012, 01:26 PM

I'm not wanting to shorten the rearend or get to crazy with the modifications, just looking for a prostreet look. If I tub the fenderwells back even with the frame I should be able to fit a pretty good size tire in there right?
Posted via Mobile Device

1970ChevyChamp · 05-23-2012, 10:53 PM

My plan is to go with some weld draglite wheels. Would a 15x12 rear and a 15x6 front look alright? Also, what would be a good tire size for the rear? Any comments appreciated, Thanks

**68bowtie** · 05-24-2012, 02:12 AM

Personally not a fan of skinnys up front... 7" or 8" would look better.

Depending on the backspace on the draglites youll prob have to narrow the rear. Or go with a wheel you can customize the backspace. I think a 12" rear will easily fit with tubs flush with the frame (someone else pls confirm)..
Posted via Mobile Device

**68bowtie** · 05-24-2012, 02:29 AM

Looks like the DL's come in several backspace options, should be good to go!
Posted via Mobile Device

fastwillie 696969 · 05-24-2012, 03:12 AM

i got 15x14 with 31x18.5 tire frame was narrowed by 3 inches / as far a tubbs took two sets and welded them together

**68bowtie** · 05-25-2012, 10:29 AM

Quote:

Originally Posted by fastwillie 696969

i got 15x14 with 31x18.5 tire frame was narrowed by 3 inches / as far a tubbs took two sets and welded them together

Very nice. I like how you moved in the orig frame rails... Got any more pics of the setup from the outside?
Posted via Mobile Device

1moretoy · 05-25-2012, 12:52 PM

Fastwillie....What offset did you go with. I would like to get some 20x14 wheels but not if I have to narrow the frame. I don't mind narrowing the rear end or making wider tubs. Thanks
Posted via Mobile Device

Ackattack · 05-25-2012, 01:20 PM

Check my build thread starting at #128

http://67-72chevytrucks.com/vboard/s...&postcount=128

Bluechevy68 · 05-25-2012, 01:35 PM

I got a already tubbed 67 short wide bed if anyone is interested.

Thanks,
Brian

05-21-2012, 10:51 PM	#2
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,739	Re: Tubbing Bed Questions http://67-72chevytrucks.com/vboard/s...d.php?t=161189 http://67-72chevytrucks.com/vboard/s...d.php?t=524400 Here are a couple. I know there are others. Just be sure to use the bigger piece of each tub so you have one seam instead of two... Posted via Mobile Device Posted via Mobile Device __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

05-21-2012, 10:59 PM	#3
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,739	Re: Tubbing Bed Questions Heres the one i was looking for. page 2 of this thread... http://67-72chevytrucks.com/vboard/s...=322819&page=2 Posted via Mobile Device __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

05-22-2012, 08:01 AM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Tubbing Bed Questions i'd think you'd first b more concerned about building the rear frame half and suspension// once that is solved you can go about mounting the bed and clearancing the wheels __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

05-22-2012, 01:11 PM	#6
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,739	Re: Tubbing Bed Questions Depends on the tire size your using. You can fit a lot of tire in there without frame mods. Posted via Mobile Device __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

05-22-2012, 01:26 PM	#7
1970ChevyChamp Registered User Join Date: Dec 2011 Location: Madison, Kansas Posts: 102	Re: Tubbing Bed Questions I'm not wanting to shorten the rearend or get to crazy with the modifications, just looking for a prostreet look. If I tub the fenderwells back even with the frame I should be able to fit a pretty good size tire in there right? Posted via Mobile Device Last edited by 1970ChevyChamp; 05-23-2012 at 10:51 PM.

05-21-2012, 10:14 PM	#1
1970ChevyChamp Registered User Join Date: Dec 2011 Location: Madison, Kansas Posts: 102	Tubbing Bed Questions Hey all, I am buillding a '67 shortbed and I am aiming for a pro-street look. I am aware that in order to achieve this I will need to tub the rear fender wells to fit some wider tires back there. My question is how??? What are some good ways or techniques to get this done. I searched on here looking for a thread to help me out and was unsuccessful finding what I wanted (might have been operator error). If you guys could point me in the right direction I would really appreciate it!!

05-23-2012, 10:53 PM	#8
1970ChevyChamp Registered User Join Date: Dec 2011 Location: Madison, Kansas Posts: 102	Re: Tubbing Bed Questions My plan is to go with some weld draglite wheels. Would a 15x12 rear and a 15x6 front look alright? Also, what would be a good tire size for the rear? Any comments appreciated, Thanks

05-24-2012, 02:12 AM	#9
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,739	Re: Tubbing Bed Questions Personally not a fan of skinnys up front... 7" or 8" would look better. Depending on the backspace on the draglites youll prob have to narrow the rear. Or go with a wheel you can customize the backspace. I think a 12" rear will easily fit with tubs flush with the frame (someone else pls confirm).. Posted via Mobile Device __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

05-24-2012, 02:29 AM	#10
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,739	Re: Tubbing Bed Questions Looks like the DL's come in several backspace options, should be good to go! Posted via Mobile Device __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

05-24-2012, 03:12 AM	#11
fastwillie 696969 ~Rest In Peace~ Join Date: May 2005 Location: CALIFORNIA NOR CAL Posts: 9,707	Re: Tubbing Bed Questions i got 15x14 with 31x18.5 tire frame was narrowed by 3 inches / as far a tubbs took two sets and welded them together Attached Images __________________ is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex

05-25-2012, 12:52 PM	#13
1moretoy Registered User Join Date: Jul 2008 Location: san jose ca Posts: 467	Re: Tubbing Bed Questions Fastwillie....What offset did you go with. I would like to get some 20x14 wheels but not if I have to narrow the frame. I don't mind narrowing the rear end or making wider tubs. Thanks Posted via Mobile Device Last edited by 1moretoy; 05-25-2012 at 12:57 PM.

05-25-2012, 01:20 PM	#14
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Re: Tubbing Bed Questions Check my build thread starting at #128 http://67-72chevytrucks.com/vboard/s...&postcount=128 __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

05-25-2012, 01:35 PM	#15
Bluechevy68 Registered User Join Date: Nov 2011 Location: London,KY Posts: 299	Re: Tubbing Bed Questions I got a already tubbed 67 short wide bed if anyone is interested. Thanks, Brian



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.