Radio question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bgbchevy · 11-28-2003, 03:28 PM

We are in the process of installing a new radio and speaker set and we are having a little trouble. I bought a new dual speaker set from custom auto-sound, and we are have trouble refitting the center A/C vent. Has anyone done this instillation before? Do you have to modify any brackets to get the speaker and the center vent to fit together?

Thanks...

**Stocker** · 11-28-2003, 07:47 PM

Oh man, it has been a whole lotta years since I put one of those in my truck, but I'm 99% sure I didn't need to modify anything. Also pretty sure I didn't remove the center vent, just the ducting. Sorry I'm not more help.

Andy4639 · 11-28-2003, 09:18 PM

I closed off the driver side of the center vent with duct tape, so that the air would blow out better. Awhile later when I was putting in my new system it helped out that I had done it. You have one less tube of air to blow through and you plug the distribution out let up and force more flow through three tubes and istead of four. I think it help anyways.

11-28-2003, 03:28 PM	#1
bgbchevy Registered User Join Date: Aug 2001 Location: College Station, Texas Posts: 486	Radio question. We are in the process of installing a new radio and speaker set and we are having a little trouble. I bought a new dual speaker set from custom auto-sound, and we are have trouble refitting the center A/C vent. Has anyone done this instillation before? Do you have to modify any brackets to get the speaker and the center vent to fit together? Thanks... __________________ 1972 Chevrolet C/20 LWB, BB 402, Tach, Bedside Toolbox, Posi, Factory AC, Factory AM/FM, cruise, Dana 60

11-28-2003, 07:47 PM	#2
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,658	Oh man, it has been a whole lotta years since I put one of those in my truck, but I'm 99% sure I didn't need to modify anything. Also pretty sure I didn't remove the center vent, just the ducting. Sorry I'm not more help. __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

11-28-2003, 09:18 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,943	Center Vent I closed off the driver side of the center vent with duct tape, so that the air would blow out better. Awhile later when I was putting in my new system it helped out that I had done it. You have one less tube of air to blow through and you plug the distribution out let up and force more flow through three tubes and istead of four. I think it help anyways. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.