A better window wipe/seal??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

IndyRich · 07-09-2010, 02:09 AM

I have a new set of window wipes/seals from LMC. The interior felt side is great....great fit, great felt against the window. HOWEVER, on the outside of the window I do NOT like the design. It is too long and it is only rubber curved down toward the glass. I would like the seal to overlap onto the outside of the door like an 1/8 to 1/4 of an inch, as well as the seal turned up toward the top of the door with felt on the window side.

Does anyone know of an aftermarket set like this? Or something from another truck that will work??

Would love some suggestions!!

IndyRich · 07-10-2010, 01:58 AM

ttt
anything?

vectorit · 07-10-2010, 02:09 AM

All my seals I had to trim to fit just right. Had to clip a smidgen of length, and razor blade shave the width a hair.
Out of the box, they bow and didn't wipe the window.
It was a major PITA to get it right for my situation.
In my case it was definitely not a plug and play swap.
I also used a flexible black silicon to fill the tip area to add an extra seal.

**leddzepp** · 07-10-2010, 01:02 PM

In my experience, only NOS fits correctly.

Sinister · 07-10-2010, 01:56 PM

Classic Heartbeat has some pretty good ones. I had the LMC ones before and they were pretty much trash.

07-09-2010, 02:09 AM	#1
IndyRich Registered User Join Date: Feb 2009 Location: Indianapolis, IN Posts: 372	A better window wipe/seal??? I have a new set of window wipes/seals from LMC. The interior felt side is great....great fit, great felt against the window. HOWEVER, on the outside of the window I do NOT like the design. It is too long and it is only rubber curved down toward the glass. I would like the seal to overlap onto the outside of the door like an 1/8 to 1/4 of an inch, as well as the seal turned up toward the top of the door with felt on the window side. Does anyone know of an aftermarket set like this? Or something from another truck that will work?? Would love some suggestions!!

07-10-2010, 01:58 AM	#2
IndyRich Registered User Join Date: Feb 2009 Location: Indianapolis, IN Posts: 372	Re: A better window wipe/seal??? ttt anything?

07-10-2010, 02:09 AM	#3
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: A better window wipe/seal??? All my seals I had to trim to fit just right. Had to clip a smidgen of length, and razor blade shave the width a hair. Out of the box, they bow and didn't wipe the window. It was a major PITA to get it right for my situation. In my case it was definitely not a plug and play swap. I also used a flexible black silicon to fill the tip area to add an extra seal. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

07-10-2010, 01:02 PM	#4
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,997	Re: A better window wipe/seal??? In my experience, only NOS fits correctly. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

07-10-2010, 01:56 PM	#5
Sinister Between Trucks... Join Date: Mar 2002 Location: Los Angeles, CA. Posts: 3,830	Re: A better window wipe/seal??? Classic Heartbeat has some pretty good ones. I had the LMC ones before and they were pretty much trash. __________________ Beat it to fit, Paint it to match...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.