From stock radio, to cheesy 80's aftermarket, back to stock. Need help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*Mister-B* · 12-17-2012, 02:49 PM

I need help with the installation of a stock '69 AM radio. The po removed the original, and installed a crappy AudioBarn tape player. I just want to go back to stock for the original sound and feel. I found an original GM period correct AM radio on eBay. I also have the stock in dash speaker.

I can see that the wires to the stock speaker are missing. Not sure about power either. It was likely changed. I see a blue cord that's left behind from the old stereo I removed.

So, how do I wire this up? Am I going to need to buy some stock wires of some sort?

Thanks
Posted via Mobile Device

**FirstOwner69** · 12-17-2012, 03:13 PM

This is a factory radio harness.The red goes to the fuse block. The green and black are to the speaker.

*Mister-B* · 12-17-2012, 07:33 PM

Quote:

Originally Posted by FirstOwner69

This is a factory radio harness.The red goes to the fuse block. The green and black are to the speaker.

Thanks. That's very helpful
Posted via Mobile Device

**Daddy Brim** · 12-17-2012, 09:22 PM

If you do not have the proper wires for the radio. You can make your own with crimp on female connector with a insulated cover, and some wire.

12-17-2012, 02:49 PM	#1
Mister-B Account Suspended Join Date: Oct 2012 Location: Salt Lake City, Utah Posts: 3,331	From stock radio, to cheesy 80's aftermarket, back to stock. Need help I need help with the installation of a stock '69 AM radio. The po removed the original, and installed a crappy AudioBarn tape player. I just want to go back to stock for the original sound and feel. I found an original GM period correct AM radio on eBay. I also have the stock in dash speaker. I can see that the wires to the stock speaker are missing. Not sure about power either. It was likely changed. I see a blue cord that's left behind from the old stereo I removed. So, how do I wire this up? Am I going to need to buy some stock wires of some sort? Thanks Posted via Mobile Device

12-17-2012, 03:13 PM	#2
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,842	Re: From stock radio, to cheesy 80's aftermarket, back to stock. Need help This is a factory radio harness.The red goes to the fuse block. The green and black are to the speaker. Attached Images

12-17-2012, 09:22 PM	#4
Daddy Brim Senior Member Join Date: Feb 2011 Location: Clovis Ca. Posts: 632	Re: From stock radio, to cheesy 80's aftermarket, back to stock. Need help If you do not have the proper wires for the radio. You can make your own with crimp on female connector with a insulated cover, and some wire. __________________ I'm sorry I called you stupid. I thought you knew already. 67 C-20 Custom Camper 68 Nova 396 it does wheelies 2005 Buick Century the one the wife drives 1989 Toyota Tercel to drive when I can't put gas in the first 2.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.