Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-27-2024, 04:52 PM | #1 |
Active Member
Join Date: Dec 2007
Location: Dumas, Texas
Posts: 194
|
Taillight Fuel Filler Hose Routing
I'm trying to route the filler hose from my tail light filler to my rear mounted tank.
I have a sniper fuel tank with the filler hole in the top lower left corner. I have both a straight filler neck for the tank and one like the picture. Both are 2" in diameter. I plan on going between the bed and the frame rail the up to the filler in the tail light. I have thought about reducing down to a 1" filler (as that is the size of the end in the tail light. Then get a long filler hose with a 90 degree end to connect. My concern is enough slope so all the fuel drains into the tank. Can anyone who has plumbed a tail light filler to a rear mounted tank give me some advise? Thanks Larry |
07-28-2024, 03:35 PM | #2 |
Registered User
Join Date: Sep 2020
Location: Cleveland, Ohio
Posts: 524
|
Re: Taillight Fuel Filler Hose Routing
I originally had a 2" set-up, but I could not get the hose to bend tight enough. I had to go to 1.5" diameter. I bought and adapter to go from the 2" to 1.5" from ICT Billet if I recall.
|
07-29-2024, 10:10 AM | #3 |
Active Member
Join Date: Dec 2007
Location: Dumas, Texas
Posts: 194
|
Re: Taillight Fuel Filler Hose Routing
Thanks.
Which neck did you use on the tank and what did you use to connect from there to the filler neck? Thanks |
07-29-2024, 04:54 PM | #4 |
Registered User
Join Date: Sep 2020
Location: Cleveland, Ohio
Posts: 524
|
Re: Taillight Fuel Filler Hose Routing
I am using a Boyd tank and LS Fabrication rear fuel door set-up. I used these hoses:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 |
Bookmarks |
|
|