Steel cab for 57 2:nd 3100. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SweTruck · 09-26-2008, 03:08 PM

Hi folks!

Does anyone know of reprod steel cabs?

I have found bits and pieces, but not a complete. I have rust in sooo many places!

Take care!

//B

dwcsr · 09-26-2008, 04:20 PM

Dynacorn makes one. I believe you have to go through certain dealers to get it. check www.dynacorn.com

1-ton of fun · 09-26-2008, 06:32 PM

i just bought a parts truck that had a good cab for mine. it was $1200 and the rear fenders and bed are good also. although i am building a long bed, so i can't use the bed on this build. it will be used on the next one.

SweTruck · 09-27-2008, 11:03 PM

thanks for the reply,

but.... I couldn´t find the 57´cab on their site. Only up to 54´. Are you sure it´s there?

//B

Kim57 · 09-28-2008, 01:32 AM

SweTruck
Welcome to the site.
I don't believe anyone is making a cab for the 55 to 59 trucks.
Most of these trucks have rust but can be repaired with a little skill and some patience.
Post some pics so we can see what you have and I'm sure you will get lots of ideas on what to do.
Kim

mbgmike · 09-28-2008, 10:50 AM

We are Dealers for Dynacorn and they do not make the cab. Only the 47-50 and 52-54.
They are supposed to be offered sometime in the near future according to DII. Expect to pay alot though. I have not seen any news on the status.

dwcsr · 09-28-2008, 01:12 PM

We are a DII dealer as well but not for Classic Bodies. I did see the one they made at the 07 sema show. So I do know its coming, I assumed it would be out now. I just heard its tied up in licensing aproval from GM but that may be old news.

hotrodsbyray · 09-28-2008, 09:26 PM

usbody.com makes a complete fiberglass body but i dont think there is a steel one on the market yet.

SweTruck · 09-29-2008, 03:17 PM

Hi,

Thanks for all the input.

I do have a good bit of rust in the cab. Such as the better part of the floor is missing including lower part of the firewall, also the bottom part where the door hinge is fixed to the body. But the worst is in the ceiling around the windshield, all the way down to the glass and that´s the bit that worries me. All the rest is doable. But it takes a lot of skill/time/effort to make that right. If I could get that piece I´d be allright. But a whole cab would save me a lot of time.

I´ll try to get some pictures and you´ll see.

Take care

//Swetruck

09-26-2008, 03:08 PM	#1
SweTruck Registered User Join Date: Aug 2008 Location: Huddinge, Sweden Posts: 14	Steel cab for 57 2:nd 3100. Hi folks! Does anyone know of reprod steel cabs? I have found bits and pieces, but not a complete. I have rust in sooo many places! Take care! //B

09-26-2008, 04:20 PM	#2
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Steel cab for 57 2:nd 3100. Dynacorn makes one. I believe you have to go through certain dealers to get it. check www.dynacorn.com

09-26-2008, 06:32 PM	#3
1-ton of fun polishing a turd Join Date: Dec 2004 Location: houston, tx Posts: 674	Re: Steel cab for 57 2:nd 3100. i just bought a parts truck that had a good cab for mine. it was $1200 and the rear fenders and bed are good also. although i am building a long bed, so i can't use the bed on this build. it will be used on the next one. __________________ 59 chevy apache 31 4x4 - my project: http://67-72chevytrucks.com/vboard/s....php?p=8668512 53 buick special - straight 8 sled - blow through turbo 47 gmc - flatbed hot rod build 99 ford econoline e350 - 4x4 converted family roadtrip/overlanding rig AKA 'Monstervan' AKA 'Daddy-Van'

09-27-2008, 11:03 PM	#4
SweTruck Registered User Join Date: Aug 2008 Location: Huddinge, Sweden Posts: 14	Re: Steel cab for 57 2:nd 3100. thanks for the reply, but.... I couldn´t find the 57´cab on their site. Only up to 54´. Are you sure it´s there? //B

09-28-2008, 01:32 AM	#5
Kim57 Registered User Join Date: Aug 2007 Location: Corona, California Posts: 7,998	Re: Steel cab for 57 2:nd 3100. SweTruck Welcome to the site. I don't believe anyone is making a cab for the 55 to 59 trucks. Most of these trucks have rust but can be repaired with a little skill and some patience. Post some pics so we can see what you have and I'm sure you will get lots of ideas on what to do. Kim

09-28-2008, 10:50 AM	#6
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: Steel cab for 57 2:nd 3100. We are Dealers for Dynacorn and they do not make the cab. Only the 47-50 and 52-54. They are supposed to be offered sometime in the near future according to DII. Expect to pay alot though. I have not seen any news on the status. Last edited by mbgmike; 09-28-2008 at 10:57 AM. Reason: added

09-28-2008, 01:12 PM	#7
dwcsr Hollister Road Co. Join Date: Apr 2005 Location: Houston Posts: 6,134	Re: Steel cab for 57 2:nd 3100. We are a DII dealer as well but not for Classic Bodies. I did see the one they made at the 07 sema show. So I do know its coming, I assumed it would be out now. I just heard its tied up in licensing aproval from GM but that may be old news.

09-28-2008, 09:26 PM	#8
hotrodsbyray Registered User Join Date: Feb 2007 Location: TN Posts: 164	Re: Steel cab for 57 2:nd 3100. usbody.com makes a complete fiberglass body but i dont think there is a steel one on the market yet.

09-29-2008, 03:17 PM	#9
SweTruck Registered User Join Date: Aug 2008 Location: Huddinge, Sweden Posts: 14	Re: Steel cab for 57 2:nd 3100. Hi, Thanks for all the input. I do have a good bit of rust in the cab. Such as the better part of the floor is missing including lower part of the firewall, also the bottom part where the door hinge is fixed to the body. But the worst is in the ceiling around the windshield, all the way down to the glass and that´s the bit that worries me. All the rest is doable. But it takes a lot of skill/time/effort to make that right. If I could get that piece I´d be allright. But a whole cab would save me a lot of time. I´ll try to get some pictures and you´ll see. Take care //Swetruck



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.