![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Jun 2014
Location: Mocksville, NC
Posts: 1,748
|
67-72 Blazer Development/Concept Photos
I have been putting together a series of photo sets that I have obtained from the GM Heritage Center depicting the development of the 67-72 GM trucks. You may have seen the main thread covering the pickups here. I am just now getting to the Blazer development photos and wanted to share them here on the appropriate board. I have titled these Part 6 because I am indexing these pickup variant development photos and including them in a contents section on the main pickup thread. I hope everyone enjoys these!
Part 6, Blazers The development of the 67-72 GM pickups reached the clay mockup stage by mid '63 lead by designer Harry Bentley Bradley. If you've looked through the pickup development thread, you already know all about this. Parallel to the development of the truck line, Bradley was also involved in designing a new vehicle called the Blazer and categorized as a "light utility truck". It was originally based on a completely separate and unique platform from the pickups and was set to compete with the Scout and CJ. Development really began to take off after the preproduction design for the C10 was finalized in late '64. By mid '65, the first Blazer clay model was ready which is were the photos begin. -August 1965 The original Blazer design was on display on the patio. I will let these photos do the talking and set the basis for what the original Blazer was supposed to be. Note that this was to be released at a '67 model based on the license plate. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() -September 1965 One month later, the model was back in the studio and the designers were experimenting with different grill proposal. ![]() -November 1965 By the end of '65, they were finalizing the design for the Blazer, experimenting with a few more grill proposals, experimenting with top options, planning seating arrangements in the body bucks, illustrating removable body panel options, and laying out the dash configuration. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() -December 1965 The last photo for the development of the original Blazer design illustrates another dash proposal. ![]() At this point GM ceased development of the Blazer and this model never made it to production. Bradley mentions this in his interview and claims that the recent release of the Bronco prompted GM to hypothesize that the "light utility truck" market would now be overcrowded and continuing to introduce the Blazer would be a disaster. Therefore, this model was scrapped. Much to GM's surprise, however, the public desire for utility vehicles began to grow drastically and the Bronco was a success. Of course, GM needed to get into this market now more than ever and began scrambling to revive the idea of introducing a Blazer to the market. With the original design scrapped and now outdated, GM decided to take the economical approach and modify the pickup platform to adapt it to a utility type vehicle. Development of the Blazer resumes in early '68 in preparation for a '69 model year release. -April 1968 The new concept for a Blazer was to essentially shorten the pickup to a unibody type construction and add a top. Note that these original mockups used a '68 nose. ![]() ![]() ![]() ![]() ![]() -May 1968 With the overall design and wheelbase set, the main focus was on top designs. This first top proposal was labeled as a "Trailmaster Convertible". ![]() ![]() ![]() ![]() -July 1968 By this point the Blazer design was essentially finalized and GM was experimenting with striping options and another top design. Note that they have changed the nose to the '69 version here. ![]() ![]() GM decided to scrap these striping options and top design, but overall the Blazer was ready for production. Development on the Blazer ends here because yearly updates were simply carried over from the pickups. In the Bradley interview, he talks about how upset he was that GM shelved his design and went with a modified pickup for the production Blazer. At the time, GM's decision was simply an economical decision based on the short time frame they wanted in getting the Blazer to production. In hindsight, however, it was a brilliant move. Ultimately, the Blazer was a huge success and led to all other competitors eventually succumbing to the fact that their light duty utility vehicle sales were dropping and they needed to also introduce a larger pickup based SUV.
__________________
Builds: Green Gus the 68 C10 ; Sullii the 72 1500 - Instagram: @dr.hewitt - C10 Concept/Development Photos: Master Thread Last edited by hewittca; 09-22-2016 at 07:32 PM. |
![]() |
![]() |
Bookmarks |
|
|