71 Cheyenne-SAVE ME FROM THE CRUSHER! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**JQ-72** · 07-24-2008, 07:17 PM

Well, I've taken some heat on some previous posts about hauling trucks off to the crusher. Here's your chance!!! I just bought this 71 Cheyenne for the motor and trans. I'm selling the rest for what I can get from parts + scrap price. The only piece of good sheetmetal is the left front fender. Non A/C cab with average rust and bondo around filler neck (lots of it!). Decent doors with minor rust on bottoms, power brakes (working), power steering sector, all automatic stuff. 3.08 open coil rear. $350 as mentioned above and minus motor/trans. I'll give it a few days and if no one is interested, I'll sell parts. Oh yeah, this was originally a big block truck with straight shift and tachometer! Has 350/350 now and tach is in my parts collection! I'm in NW Ala.
Joshua

396muncie · 07-25-2008, 11:00 AM

If it makes it to parting, does it still have the 400 emblems on the front fenders? I'm interested if in decent shape. Thanks

cypressbog · 07-25-2008, 08:09 PM

If it makes it to parting, and the seat belts are in good shape, I'd like a price.

lowdownstar · 07-25-2008, 08:14 PM

i could use a cowl, if you part it out

Ray

**JQ-72** · 07-25-2008, 10:49 PM

WOW, I just found out scrap iron is up to $12/100lb. here. Since no one is showing interest, I'll probably haul it off first of next week. I will pull the stuff like ps, pb, auto stuff. Anybody need anything else??
JQ

RJGeister · 07-25-2008, 11:04 PM

Shape of kick panel vent doors, tailgate and grill?

Thanks,
Rich

**JQ-72** · 07-25-2008, 11:51 PM

* 400 emblems - pretty nice, a few small blisters, needs black touched up. $20 shipped.
* Seat belts - I'll check condition tomorrow night after work. $40 shipped if they are good.
*Cowl is nice - $25 + shipping.
*Kick panel vent doors - $25/pair shipped. Tailgate and grill are junk!

soala70 · 07-26-2008, 12:05 AM

what about the radiator surport? need it if not gone on battery side

**JQ-72** · 07-26-2008, 12:22 AM

I don't think the rad. support is too bad, but I'll check tomorrow.
JQ

67_C-30 · 07-26-2008, 12:34 AM

I'd like to have the whole set of pedal pads and trim along with the gas pedal. Also, how good is the stainless trim in the cab dividing the ochre and white?

LUV2XCLR8 · 07-26-2008, 06:55 AM

Quote:

Originally Posted by JQ-72

WOW, I just found out scrap iron is up to $12/100lb. here.

WOW, That has jumped

Botietruck · 07-26-2008, 09:09 AM

I would be interested in the chrome strips above the interior door panels if they are not pitted. Shipping to 23322?

lowdownstar · 07-26-2008, 10:36 AM

do you know what shipping would be to 01075 mass for that cowl?

jeffspower · 07-26-2008, 12:43 PM

I'm interested in the stainless mirror tripods if they are not rusty or beat up.

**JQ-72** · 07-26-2008, 01:23 PM

Keep the requests coming...I'm at work now, but I'll check the condition of these parts when I get home.
JQ

*Shane* · 07-26-2008, 08:06 PM

inner fenders ... no rust & fairly dent free?

lowriden58 · 07-26-2008, 09:26 PM

man if you were closer i would save that badboy from the crusher!

**JQ-72** · 07-26-2008, 10:14 PM

*RJGeister - vent doors look great, no rust, tabs & springs intact. $25 shipped
*Cypressbog - middle belts are missing. Dr. & Pass set look pretty good, a little dirty, but should clean up. Boots and buckles are not broken. $30 shipped.
*Soala - Rad support has a small hole, better than most I get in. $100 + shipping. I priced it high because I really don't want to ship it. Pick up and it will be cheaper! - too bad you are not in No.Ala!!
*67C-30 - I pulled the pedals and I've got some nicer paint divider trim. I'll- hold it till you come up and get the wheels.
*Botietruck - Door panel trim is pretty rusty.
* Lowdownstar - PM sent
*Jeffspower - Mirror tripods are not rusty or dented up. Pass side has a hard scratch that probably won't polish out (not dented) Good driver. $30 shipped.
*Shane - Dr. inner is perfect, pass has a few small cancer spots but better than average. I also have a few more sets off that are pretty good. Come on over and see me. WAR EAGLE!!

jeffspower · 07-26-2008, 10:25 PM

I'll most likely take them- but could you get a pic of the scratch, and what the short "3rd leg" looks like? I want the OE style (round tube flattened on the ends) and not the flimsy flat strap aftermarket style.

dart_451 · 07-26-2008, 10:35 PM

hi, hows the shifter arm off the steering colum?loren

**Green Machine** · 07-26-2008, 11:35 PM

Great donor truck for disk brakes and 5 lug axles, suppose you need to keep it rolling though. I likely will looking for that setup next year.

396muncie · 07-26-2008, 11:47 PM

Sounds good on the 400 emblems. PM me your payment info and I'll pay by Monday morning at the latest. Thanks

Botietruck · 07-27-2008, 08:05 AM

dart451, if he does not have a good one, I have a good one from my '71. PM me if interested.

**JQ-72** · 07-27-2008, 09:37 AM

here's some pics

**JQ-72** · 07-27-2008, 09:38 AM

more... one of the pull knobs is missing, but the doors are fine.

07-24-2008, 07:17 PM	#1
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,574	71 Cheyenne-SAVE ME FROM THE CRUSHER! Well, I've taken some heat on some previous posts about hauling trucks off to the crusher. Here's your chance!!! I just bought this 71 Cheyenne for the motor and trans. I'm selling the rest for what I can get from parts + scrap price. The only piece of good sheetmetal is the left front fender. Non A/C cab with average rust and bondo around filler neck (lots of it!). Decent doors with minor rust on bottoms, power brakes (working), power steering sector, all automatic stuff. 3.08 open coil rear. $350 as mentioned above and minus motor/trans. I'll give it a few days and if no one is interested, I'll sell parts. Oh yeah, this was originally a big block truck with straight shift and tachometer! Has 350/350 now and tach is in my parts collection! I'm in NW Ala. Joshua Attached Images __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior Last edited by JQ-72; 07-24-2008 at 07:19 PM.

07-25-2008, 11:00 AM	#2
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! If it makes it to parting, does it still have the 400 emblems on the front fenders? I'm interested if in decent shape. Thanks __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

07-25-2008, 08:09 PM	#3
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! If it makes it to parting, and the seat belts are in good shape, I'd like a price.

07-25-2008, 08:14 PM	#4
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 820	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! i could use a cowl, if you part it out Ray

07-25-2008, 10:49 PM	#5
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,574	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! WOW, I just found out scrap iron is up to $12/100lb. here. Since no one is showing interest, I'll probably haul it off first of next week. I will pull the stuff like ps, pb, auto stuff. Anybody need anything else?? JQ __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-25-2008, 11:04 PM	#6
RJGeister Retired Air Force 87-09 Join Date: Feb 2007 Location: Bonaire, Georgia 31005 Posts: 284	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! Shape of kick panel vent doors, tailgate and grill? Thanks, Rich

07-25-2008, 11:51 PM	#7
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,574	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! * 400 emblems - pretty nice, a few small blisters, needs black touched up. $20 shipped. * Seat belts - I'll check condition tomorrow night after work. $40 shipped if they are good. Cowl is nice - $25 + shipping. Kick panel vent doors - $25/pair shipped. Tailgate and grill are junk! __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-26-2008, 12:05 AM	#8
soala70 Registered User Join Date: Mar 2002 Location: geneva al usa Posts: 343	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! what about the radiator surport? need it if not gone on battery side __________________ bogey5

07-26-2008, 12:22 AM	#9
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,574	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! I don't think the rad. support is too bad, but I'll check tomorrow. JQ __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-26-2008, 12:34 AM	#10
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! I'd like to have the whole set of pedal pads and trim along with the gas pedal. Also, how good is the stainless trim in the cab dividing the ochre and white? __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club! Last edited by 67_C-30; 07-26-2008 at 12:36 AM.

07-26-2008, 09:09 AM	#12
Botietruck '71 chevy s.bed/s.side Join Date: Mar 2005 Location: Chesapeake, VA Posts: 1,571	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! I would be interested in the chrome strips above the interior door panels if they are not pitted. Shipping to 23322? __________________ STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive!

07-26-2008, 10:36 AM	#13
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 820	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! do you know what shipping would be to 01075 mass for that cowl?

07-26-2008, 12:43 PM	#14
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! I'm interested in the stainless mirror tripods if they are not rusty or beat up. __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

07-26-2008, 01:23 PM	#15
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,574	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! Keep the requests coming...I'm at work now, but I'll check the condition of these parts when I get home. JQ __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-26-2008, 08:06 PM	#16
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! inner fenders ... no rust & fairly dent free?



Register or Log In To remove these advertisements.

07-26-2008, 09:26 PM	#17
lowriden58 Registered User Join Date: Jan 2008 Location: Chesapeake Beach, MD Posts: 812	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! man if you were closer i would save that badboy from the crusher! __________________ 71 cheyenne lwb 300rwhp best 1/4 time so far 12.8 @103 http://i195.photobucket.com/albums/z...en58/001-2.jpg

07-26-2008, 10:14 PM	#18
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,574	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! RJGeister - vent doors look great, no rust, tabs & springs intact. $25 shipped Cypressbog - middle belts are missing. Dr. & Pass set look pretty good, a little dirty, but should clean up. Boots and buckles are not broken. $30 shipped. Soala - Rad support has a small hole, better than most I get in. $100 + shipping. I priced it high because I really don't want to ship it. Pick up and it will be cheaper! - too bad you are not in No.Ala!! 67C-30 - I pulled the pedals and I've got some nicer paint divider trim. I'll- hold it till you come up and get the wheels. Botietruck - Door panel trim is pretty rusty. Lowdownstar - PM sent Jeffspower - Mirror tripods are not rusty or dented up. Pass side has a hard scratch that probably won't polish out (not dented) Good driver. $30 shipped. Shane - Dr. inner is perfect, pass has a few small cancer spots but better than average. I also have a few more sets off that are pretty good. Come on over and see me. WAR EAGLE!! __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-26-2008, 10:25 PM	#19
jeffspower Well, Whoop-dee-do! Join Date: Mar 2003 Location: Easton, Mo. pop.- me & scarcely a few others Posts: 2,302	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! I'll most likely take them- but could you get a pic of the scratch, and what the short "3rd leg" looks like? I want the OE style (round tube flattened on the ends) and not the flimsy flat strap aftermarket style. __________________ '68 GMC shortbox 4x4 350/SM465/T221- bought it in '83 SOLD '72 K20 500 Cad/TH400/NP205 SOLD '92 Chevy 2500 6.5 mech TD 4L80E crusty daily driver '72 Monte Carlo... sweet low mile toy '11 Dodge Challenger IE 392 6spd... midlife car

07-26-2008, 10:35 PM	#20
dart_451 Registered User Join Date: May 2007 Location: topeka,ks Posts: 77	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! hi, hows the shifter arm off the steering colum?loren

07-26-2008, 11:35 PM	#21
Green Machine Senior Member Join Date: Jul 2004 Location: Estherville, Iowa Posts: 3,371	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! Great donor truck for disk brakes and 5 lug axles, suppose you need to keep it rolling though. I likely will looking for that setup next year. __________________ 1968 C10 307 3spd Long Fleet ------ http://67-72chevytrucks.com/vboard/s...d.php?t=201103 1970 C10 305 Super T10 Long Fleet --- http://67-72chevytrucks.com/vboard/s...d.php?t=202285 1971 C20 383 TH350 Dana Posi ----- http://67-72chevytrucks.com/vboard/s...d.php?t=206894 2001 GMC Sierra 1500 C3 6.0

07-26-2008, 11:47 PM	#22
396muncie Registered User Join Date: Sep 2006 Location: Lancaster, PA Posts: 271	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! Sounds good on the 400 emblems. PM me your payment info and I'll pay by Monday morning at the latest. Thanks __________________ 70 Custom/10, 396, Muncie 4spd, SWB SOLD 72 Cheyenne K20, 350, Granny 4spd, LWB, daily driver 72 Cheyenne Super C20, 350, Turbo 400, LWB, parts truck for 4WD Cheyenne

07-27-2008, 08:05 AM	#23
Botietruck '71 chevy s.bed/s.side Join Date: Mar 2005 Location: Chesapeake, VA Posts: 1,571	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! dart451, if he does not have a good one, I have a good one from my '71. PM me if interested. __________________ STILL PLAYS WITH CARS...AND TRUCKS!! Parents! Be good to your kids...they get to choose your nursing home! 250 I-6 with a 3 speed Saginaw and Borg Warner Overdrive...She's got overdrive!

07-27-2008, 09:37 AM	#24
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,574	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! here's some pics Attached Images __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

07-27-2008, 09:38 AM	#25
JQ-72 Senior Member Join Date: Feb 2001 Location: Killen, Alabama USA Posts: 3,574	Re: 71 Cheyenne-SAVE ME FROM THE CRUSHER! more... one of the pull knobs is missing, but the doors are fine. Attached Images __________________ 72 Cheyenne Super swb. Factory 402/400,tach,posi,AM/FM, A/C. Adding cruise, 8-track 72 Cheyenne Super swb. 350/350 A/C, bucket seats 72 Cheyenne swb. Factory 402/400, tilt, posi, A/C 72 Cheyenne Super K-10. 350/4 spd., posi. 72 Suburban 350/350 tilt, tach, AM/FM, A/C, luggage rack 72 GMC Sierra lwb. 350/350, A/C. medium green/olive interior

Register or Log In To remove these advertisements.