FL BB Edelbrock intake, carb, upper trim for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

custom1970 · 10-04-2012, 04:36 PM

Ok, my first time trying to sell to please work with me...

See pics, can post more if needed. Everything plus shipping or pickup no problem. Location is Stuart Fl.

Edelbrock #71631 intake, new in box!! never used with new gaskets $350.00 (cost 400.00 plus like 45 for gaskets)

Edelbrock #9913 750cm reman carb. bought it from edelbrock, used maybe 30 minutes. have extra (smaller) set of rods and jets for it. Didn't use cause my truck ran better with my old Holley. $200.00 (cost around 260.00 and jets/rods were 30.00 or 40.00)

Upper trim for longbed fleetside, was on truck only a few years (stored inside) metal is still shiny, but the flat black has flaked off in a few places, see the pics have more if needed. Cab corners are OEM off the truck. $200.00

Upper trim, cab corners, new in package, left and right 20.00 ea.

CC69Rat · 10-04-2012, 04:43 PM

First on the upper trim pending pics

custom1970 · 10-04-2012, 04:45 PM

Quote:

Originally Posted by CC69Rat

First on the upper trim pending pics

just got the pics up, like i said the flat black will have to be touched up or re-sprayed to be perfect. will put up some more pics if you need

custom1970 · 10-04-2012, 04:52 PM

last of trim pic that i have

custom1970 · 10-04-2012, 04:43 PM

More pics

CC69Rat · 10-04-2012, 06:00 PM

Im going to pass for now.. good luck with the sale.
Posted via Mobile Device

custom1970 · 10-06-2012, 09:15 AM

Bump for the weekend
Posted via Mobile Device

custom1970 · 10-09-2012, 12:38 PM

TTT. thanks

custom1970 · 10-11-2012, 12:42 PM

a few more parts, no one else interested in the upper molding?

window regulator LH $20.00 plus shipping
rubber cargo light gasket, new, $5.00
firewall plastic wire trough , new $5.00
Dash with gauges: $40.00

496bb · 10-11-2012, 10:45 PM

best shipped price on mouldings and firewall trough

custom1970 · 10-12-2012, 09:04 AM

Quote:

Originally Posted by 496bb

best shipped price on mouldings and firewall trough

What's your zip code? I'll try and figure out what UPS will cost, thanks

tex_waco_usmc · 10-12-2012, 09:45 AM

Interested in Intake and carb... Best price on both shipped to 76539

custom1970 · 10-12-2012, 10:20 AM

Quote:

Originally Posted by tex_waco_usmc

Interested in Intake and carb... Best price on both shipped to 76539

PM sent, thanks

custom1970 · 10-12-2012, 10:27 AM

Quote:

Originally Posted by 496bb

best shipped price on mouldings and firewall trough

looks like UPS shipping to Birmingham AL. would be around $40.00 I'll split the shipping and throw in the plastic wire trowel for free. let me if that works, thanks

custom1970 · 10-15-2012, 03:54 PM

Ttt

496bb · 10-15-2012, 08:05 PM

sorry it took me a few days to get back to ya here- 35244 is my zip. so are you saying 220 shipped?

custom1970 · 10-15-2012, 08:53 PM

Quote:

Originally Posted by 496bb

sorry it took me a few days to get back to ya here- 35244 is my zip. so are you saying 220 shipped?

Yes, let me know thanks
Posted via Mobile Device

custom1970 · 10-18-2012, 03:11 PM

ttt, any more interest?

kedmunds · 10-21-2012, 09:43 AM

Interested in your Dash w/gauges. Please let me know if it is still available and if the gauges actually work. Thanks

custom1970 · 10-22-2012, 02:20 PM

Quote:

Originally Posted by kedmunds

Interested in your Dash w/gauges. Please let me know if it is still available and if the gauges actually work. Thanks

I know this sounds typical, but they did work. If you know a way for me to test them them let me know and i will. If you look at the pic of the back of the panel you'll notice a burn spot on the plastic circuit. This can be repaired. It's from where (years ago) when i pulled the dash i forgot unhook the battery and the alt gauge touched the dash and melted that area.

Maddoxdb · 10-22-2012, 07:37 PM

Quote:

Originally Posted by custom1970

I know this sounds typical, but they did work. If you know a way for me to test them them let me know and i will. If you look at the pic of the back of the panel you'll notice a burn spot on the plastic circuit. This can be repaired. It's from where (years ago) when i pulled the dash i forgot unhook the battery and the alt gauge touched the dash and melted that area.

How do you repair a circuit like that? I have a tach circuit that has a break in it like that. Thanks, Dustin
Posted via Mobile Device

custom1970 · 10-22-2012, 08:20 PM

Quote:

Originally Posted by Maddoxdb

How do you repair a circuit like that? I have a tach circuit that has a break in it like that. Thanks, Dustin
Posted via Mobile Device

You can solder a small jumper wire into it to bypass the burned area. Pretty easy to do.
Posted via Mobile Device

custom1970 · 10-26-2012, 12:22 PM

Bump for the weekend

VA72C10 · 10-26-2012, 02:08 PM

Best price for carb and cargo gasket shipped to 23112?
Posted via Mobile Device

custom1970 · 10-26-2012, 02:52 PM

Quote:

Originally Posted by VA72C10

Best price for carb and cargo gasket shipped to 23112?
Posted via Mobile Device

If you pay the $200.00 i'll ship for free and throw in the cargo gasket & the new jets and metering rods, thanks,

10-04-2012, 04:36 PM	#1
custom1970 Member Join Date: Jan 2011 Location: Stuart, Florida Posts: 467	BB Edelbrock intake, carb, upper trim for sale Ok, my first time trying to sell to please work with me... See pics, can post more if needed. Everything plus shipping or pickup no problem. Location is Stuart Fl. Edelbrock #71631 intake, new in box!! never used with new gaskets $350.00 (cost 400.00 plus like 45 for gaskets) Edelbrock #9913 750cm reman carb. bought it from edelbrock, used maybe 30 minutes. have extra (smaller) set of rods and jets for it. Didn't use cause my truck ran better with my old Holley. $200.00 (cost around 260.00 and jets/rods were 30.00 or 40.00) Upper trim for longbed fleetside, was on truck only a few years (stored inside) metal is still shiny, but the flat black has flaked off in a few places, see the pics have more if needed. Cab corners are OEM off the truck. $200.00 Upper trim, cab corners, new in package, left and right 20.00 ea. Attached Images __________________ 1970 CST LB Fleetside, 402 BB, PS, PB,AC 1968 Firebird 400 conv. 1965 Chris Craft 17' wood ski boat (SN #0001)

10-04-2012, 04:43 PM	#2
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,209	Re: BB Edelbrock intake, carb, upper trim for sale First on the upper trim pending pics __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

10-04-2012, 04:52 PM	#4
custom1970 Member Join Date: Jan 2011 Location: Stuart, Florida Posts: 467	Re: BB Edelbrock intake, carb, upper trim for sale last of trim pic that i have Attached Images __________________ 1970 CST LB Fleetside, 402 BB, PS, PB,AC 1968 Firebird 400 conv. 1965 Chris Craft 17' wood ski boat (SN #0001)

10-04-2012, 04:43 PM	#5
custom1970 Member Join Date: Jan 2011 Location: Stuart, Florida Posts: 467	Re: BB Edelbrock intake, carb, upper trim for sale More pics Attached Images __________________ 1970 CST LB Fleetside, 402 BB, PS, PB,AC 1968 Firebird 400 conv. 1965 Chris Craft 17' wood ski boat (SN #0001)

10-04-2012, 06:00 PM	#6
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,209	Re: BB Edelbrock intake, carb, upper trim for sale Im going to pass for now.. good luck with the sale. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

10-06-2012, 09:15 AM	#7
custom1970 Member Join Date: Jan 2011 Location: Stuart, Florida Posts: 467	Re: BB Edelbrock intake, carb, upper trim for sale Bump for the weekend Posted via Mobile Device __________________ 1970 CST LB Fleetside, 402 BB, PS, PB,AC 1968 Firebird 400 conv. 1965 Chris Craft 17' wood ski boat (SN #0001)

10-09-2012, 12:38 PM	#8
custom1970 Member Join Date: Jan 2011 Location: Stuart, Florida Posts: 467	Re: BB Edelbrock intake, carb, upper trim for sale TTT. thanks __________________ 1970 CST LB Fleetside, 402 BB, PS, PB,AC 1968 Firebird 400 conv. 1965 Chris Craft 17' wood ski boat (SN #0001)

10-11-2012, 12:42 PM	#9
custom1970 Member Join Date: Jan 2011 Location: Stuart, Florida Posts: 467	Re: BB Edelbrock intake, carb, upper trim for sale a few more parts, no one else interested in the upper molding? window regulator LH $20.00 plus shipping rubber cargo light gasket, new, $5.00 firewall plastic wire trough , new $5.00 Dash with gauges: $40.00 Attached Images __________________ 1970 CST LB Fleetside, 402 BB, PS, PB,AC 1968 Firebird 400 conv. 1965 Chris Craft 17' wood ski boat (SN #0001)

10-11-2012, 10:45 PM	#10
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	Re: BB Edelbrock intake, carb, upper trim for sale best shipped price on mouldings and firewall trough

10-12-2012, 09:45 AM	#12
tex_waco_usmc Project Heaven in my 67!!! Join Date: Jan 2009 Location: Bosqueville, TX Posts: 899	Re: BB Edelbrock intake, carb, upper trim for sale Interested in Intake and carb... Best price on both shipped to 76539

10-15-2012, 03:54 PM	#15
custom1970 Member Join Date: Jan 2011 Location: Stuart, Florida Posts: 467	Re: BB Edelbrock intake, carb, upper trim for sale Ttt __________________ 1970 CST LB Fleetside, 402 BB, PS, PB,AC 1968 Firebird 400 conv. 1965 Chris Craft 17' wood ski boat (SN #0001)

10-15-2012, 08:05 PM	#16
496bb Registered User Join Date: Jan 2012 Location: Birmingham AL Posts: 283	Re: BB Edelbrock intake, carb, upper trim for sale sorry it took me a few days to get back to ya here- 35244 is my zip. so are you saying 220 shipped?

10-18-2012, 03:11 PM	#18
custom1970 Member Join Date: Jan 2011 Location: Stuart, Florida Posts: 467	Re: BB Edelbrock intake, carb, upper trim for sale ttt, any more interest? __________________ 1970 CST LB Fleetside, 402 BB, PS, PB,AC 1968 Firebird 400 conv. 1965 Chris Craft 17' wood ski boat (SN #0001)

10-21-2012, 09:43 AM	#19
kedmunds Registered User Join Date: Oct 2011 Location: Birmingham, Alabama Posts: 37	Re: BB Edelbrock intake, carb, upper trim for sale Interested in your Dash w/gauges. Please let me know if it is still available and if the gauges actually work. Thanks

10-26-2012, 12:22 PM	#23
custom1970 Member Join Date: Jan 2011 Location: Stuart, Florida Posts: 467	Re: BB Edelbrock intake, carb, upper trim for sale Bump for the weekend __________________ 1970 CST LB Fleetside, 402 BB, PS, PB,AC 1968 Firebird 400 conv. 1965 Chris Craft 17' wood ski boat (SN #0001)



Register or Log In To remove these advertisements.

10-26-2012, 02:08 PM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: BB Edelbrock intake, carb, upper trim for sale Best price for carb and cargo gasket shipped to 23112? Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.