|
08-07-2019, 10:36 PM
|
#1 |
|
Registered User
Join Date: Sep 2014
Location: fairmont wv.
Posts: 7
|
Stock 42
Have a friend that has a stock 1942 half ton truck
.He wants to change from drums to discs on the front. Who makes a conversation and where can he buy. Also he wants to put a new master cylinder with booster. |
|
|
|
08-15-2019, 10:32 AM
|
#2 |
|
Registered User
Join Date: Sep 2014
Location: fairmont wv.
Posts: 7
|
Re: Stock 42
anyone?
|
|
|
|
|
08-23-2019, 06:46 AM
|
#3 |
|
Senior Member
 
Join Date: Feb 2004
Location: Williamsburg, Ohio
Posts: 1,787
|
Re: Stock 42
I would also like to have power steering on a stock 3/4 ton 46. In your case finding a rotor/hub that fits on the stock front axle spindle may not exist.
__________________
1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T Last edited by dennislbrooks; 08-23-2019 at 06:49 AM. Reason: subscribe |
|
|
|
|
10-01-2019, 01:01 PM
|
#4 |
|
Registered User
Join Date: Feb 2012
Location: So. Cali.
Posts: 2,656
|
Upgrade Front Brakes
The brakes on this rig are "Huck" (rhymes with 'suck' for good reason) and were used from 1937 through 1950 on passenger cars and 1/2 ton trucks so go find how they converted those and have at it .
IIRC you'll need to drill out and re tap one hole per spindle, back in the day we'd up grade to 1951 ~ 1967 Bendix drum brakes using stock 1/2 ton parts, it's pretty simple and you don't even need to change the master cylinder . I have the entire front axle drum to drum from a 1959 3100 in my back yard ~ saved for just such a project that never occurred, it's for sale dirt cheap to anyone who needs it . The axle & tie rods are bent, it's from an old farm truck that was Hot Rodded .
__________________
-Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH 
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
