69 door panel where to drill for armrests

[sbc10guy]

I have a 69 c10 with steel door panels and no holes for armrests. I just got a set of 69 armrests and am wondering if anyone has any measurements of where stock armrest holes are drilled. Any info is appreciated. Thanks.

[cplcorndog]

Hi

Here is what I have that is stock placement, just verify the hole distance on the arm rest be for you mark these exact number down.

1. Inner hole is 5" from top and 12" from side (this is for both sides, and opposite of the door and window handles in the blank area).

2. Outer hole 5" from top and 6 1/8" from side. Note these are to the center of the hole as well btw.

Here's a few pictures.

[sbc10guy]

Perfect info and pics. Thank you for posting.