Rear camaro caliper plumbing - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ackattack · 07-11-2008, 08:50 PM

So I'm need to hook up brake lines to the rear camaro calipers. Shouldn't be too hard, but I need a little info. What size of banjo bolt fitting does the caliper use? Also what size is the stock rear brake line, 1/4"?

I searched and search and couldn't find this. I was also surprised there wasn't an FAQ for the camaro caliper install.

ChevyDude · 07-11-2008, 11:23 PM

Are you using 93-97 Camaro calipers? If so, I will measure when I get to the shop in the morning.

**Hart_Rod** · 07-12-2008, 12:39 AM

Quote:

Originally Posted by Ackattack

So I'm need to hook up brake lines to the rear camaro calipers. Shouldn't be too hard, but I need a little info. What size of banjo bolt fitting does the caliper use? Also what size is the stock rear brake line, 1/4"?

I searched and search and couldn't find this. I was also surprised there wasn't an FAQ for the camaro caliper install.

It's 1/4 line. The banjo bolt is metric. I got mine at the dealership. I may have a couple extra, but will have to check next week.

Ackattack · 07-12-2008, 11:17 AM

Quote:

Originally Posted by ChevyDude

Are you using 93-97 Camaro calipers? If so, I will measure when I get to the shop in the morning.

yeah, that would help out.

Ackattack · 07-12-2008, 11:18 AM

Quote:

Originally Posted by Hart_Rod

It's 1/4 line. The banjo bolt is metric. I got mine at the dealership. I may have a couple extra, but will have to check next week.

I figured it was metric. Looking at summit, about the only metric size is 10mm.

**Hart_Rod** · 07-12-2008, 06:43 PM

Quote:

Originally Posted by Ackattack

I figured it was metric. Looking at summit, about the only metric size is 10mm.

10 mm sounds about right.....

Ackattack · 08-11-2008, 02:49 PM

Quote:

Originally Posted by ChevyDude

Are you using 93-97 Camaro calipers? If so, I will measure when I get to the shop in the morning.

Did you get measurements?

07-11-2008, 08:50 PM	#1
Ackattack Senior Member Join Date: Aug 2002 Location: Valley Center KS Posts: 3,525	Rear camaro caliper plumbing So I'm need to hook up brake lines to the rear camaro calipers. Shouldn't be too hard, but I need a little info. What size of banjo bolt fitting does the caliper use? Also what size is the stock rear brake line, 1/4"? I searched and search and couldn't find this. I was also surprised there wasn't an FAQ for the camaro caliper install. __________________ Project Bruiser: 68 Pro-Touring C-10 5.3L / 4L60E Project Ironhide: 97 GMC Crew Cab 4x4 Cummins SOLD: '69 GMC 1/2T SWB TBI'd: Project No Buck Assembly Manual Index Sign up Thread!!! Factory Service Manual Index

07-11-2008, 11:23 PM	#2
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Rear camaro caliper plumbing Are you using 93-97 Camaro calipers? If so, I will measure when I get to the shop in the morning. __________________ Alex 1971 Lil' Red 350 SBC 700R4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.