"Bittersweet" 83 dropmember blown LS 22s - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72BlckButy · 11-19-2012, 03:13 PM

That thing is amazing....

volker · 11-19-2012, 04:01 PM

hole in the rear is gas cap and , the slots in the front and rear are mac trac's ill post a pic of them there flush mount into the bed

7deuce · 11-21-2012, 08:37 PM

Are we really going to question the suspension on this truck!!!!!!!!!!!!! Pro touring cars have air ride and handle great!...Lets save the "How to bag a truck 101" questions out and lets see the man build an over the top truck. From the photos so far my guess is the truck will be 110% show quality.

7deuce · 11-21-2012, 08:40 PM

Oh and the only way to go suspension wise on these trucks is Porterbuilt!!!!!!!!!! The days of Zing a frame are long gone and I'm pretty sure this truck has a full Porterbuilt setup.

volker · 11-21-2012, 08:58 PM

All porterbuilt stuff controlled with accair front and rear sway bars and most likely Hal qa1 billet adjustable shocks , i want all this power to the ground for sure
Posted via Mobile Device

7deuce · 11-25-2012, 02:13 PM

Maybe NASCAR does not use air ride but there are tons of protouring cars that are on air and have great suspension response.

Hoods69BadBowTie · 11-25-2012, 03:10 PM

Sweet looking project looks like fun. The bed is killer gonna be badass when its all done

Keep up the good work on it!

Can't kech me · 11-25-2012, 10:49 PM

quote from post #179 in Project Joe Tourings build thread made by the c10 suspension guru robnolimit of No Limits Engineering

" A spring is just a spring. And, an air spring has a naturally progressive spring rate. I guess the most important thing is getting the right bag at the right hieght to get the spring rate that you want. You can have it all, it just takes a little homework. To be honest, we fix air ride systems every week, and 99.9% of all problems can be tied to parts choice, or installation. Shocks and sway bars are still important. "

Justin36 · 11-25-2012, 11:27 PM

Awesome truck!
Posted via Mobile Device

volker · 12-04-2012, 03:04 PM

wilwood brakes came last week 14" 4 piston rear end should be back anyday i had it narrowed 5" and a 4:10 posi

meter swinger · 12-04-2012, 03:17 PM

God bless, another sick C10. LOVE the wheels. That bed fabwork is awesome. Keep it coming im scribed.

Posted via Mobile Device

Kainedogg · 12-14-2012, 11:22 AM

Subscribed for the finale.

mooseknuckles · 12-28-2012, 11:01 PM

updates?

moneyeater · 12-29-2012, 10:20 AM

Looks very good and matches my taste!
Volker (thats my name)

volker · 01-03-2013, 12:49 PM

rear end is back its going in tonight , my wilwood brake petal with remote bottles showed up . i been working on the getting the bed straight the cowl panel i welded some of the vents closed to make them even and been welding on the bottom of the hood to fill in the holes

volker · 01-03-2013, 12:50 PM

heres a few more

volker · 02-10-2013, 06:08 PM

More pics coming tomorrow
Posted via Mobile Device

Mad Rods · 02-10-2013, 06:17 PM

Sweet build bro
Posted via Mobile Device

volker · 02-10-2013, 06:30 PM

Posted via Mobile Device

VA72C10 · 02-10-2013, 06:41 PM

great looking build!

74 stepside · 02-10-2013, 11:38 PM

Really nice ride you are building. Looking forward to seeing it completed.

meatwagon83 · 02-10-2013, 11:42 PM

its a nice truck, i wouldnt have cut it up, but its still a nice truck, just dont put a real busy paintjob on it

jbristo67 · 02-11-2013, 02:32 AM

Quote:

Originally Posted by meatwagon83

its a nice truck, i wouldnt have cut it up, but its still a nice truck, just dont put a real busy paintjob on it

There are a million of these. Cut away
Posted via Mobile Device
Posted via Mobile Device

volker · 02-11-2013, 03:13 PM

heres some updates

volker · 02-11-2013, 03:17 PM

more pics

11-19-2012, 04:01 PM	#2
volker Registered User Join Date: Oct 2007 Location: pittsburgh pa Posts: 95	Re: "Bittersweet" 83 dropmember blown LS 22s hole in the rear is gas cap and , the slots in the front and rear are mac trac's ill post a pic of them there flush mount into the bed

11-21-2012, 08:37 PM	#3
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: "Bittersweet" 83 dropmember blown LS 22s Are we really going to question the suspension on this truck!!!!!!!!!!!!! Pro touring cars have air ride and handle great!...Lets save the "How to bag a truck 101" questions out and lets see the man build an over the top truck. From the photos so far my guess is the truck will be 110% show quality.

11-21-2012, 08:40 PM	#4
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: "Bittersweet" 83 dropmember blown LS 22s Oh and the only way to go suspension wise on these trucks is Porterbuilt!!!!!!!!!! The days of Zing a frame are long gone and I'm pretty sure this truck has a full Porterbuilt setup.

11-21-2012, 08:58 PM	#5
volker Registered User Join Date: Oct 2007 Location: pittsburgh pa Posts: 95	Re: "Bittersweet" 83 dropmember blown LS 22s All porterbuilt stuff controlled with accair front and rear sway bars and most likely Hal qa1 billet adjustable shocks , i want all this power to the ground for sure Posted via Mobile Device

11-25-2012, 02:13 PM	#6
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: "Bittersweet" 83 dropmember blown LS 22s Maybe NASCAR does not use air ride but there are tons of protouring cars that are on air and have great suspension response.

11-19-2012, 03:13 PM	#1
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: "Bittersweet" 83 dropmember blown LS 22s That thing is amazing.... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-25-2012, 03:10 PM	#7
Hoods69BadBowTie Chevys Kick A$$ Join Date: Jan 2005 Location: Zootown, MT Posts: 12,699	Re: "Bittersweet" 83 dropmember blown LS 22s Sweet looking project looks like fun. The bed is killer gonna be badass when its all done Keep up the good work on it! __________________ HOODS is what I answer too -'79, '77, '88 Pickup Sold, '85 Camaro, '83 T/A, '81,'83,'90 K5 Blazer All Sold -'79 3/4 ton "Big Yellow Bananna" Lifted 4spd. 39.5 TSL Swampers, The money Pit -'86 K5 Blazer Silverado 6.2 4" lift 35"s -'95 Ext. Cab Shorty 4" Tuff Country rolling 35" M/T's -'83 Monte Carlo T-Tops. 126,500 Original Miles -LATER I would rather push a Chevy then drive a ford!!

11-25-2012, 10:49 PM	#8
Can't kech me Registered User Join Date: Jun 2010 Location: Longview, TX Posts: 222	Re: "Bittersweet" 83 dropmember blown LS 22s quote from post #179 in Project Joe Tourings build thread made by the c10 suspension guru robnolimit of No Limits Engineering " A spring is just a spring. And, an air spring has a naturally progressive spring rate. I guess the most important thing is getting the right bag at the right hieght to get the spring rate that you want. You can have it all, it just takes a little homework. To be honest, we fix air ride systems every week, and 99.9% of all problems can be tied to parts choice, or installation. Shocks and sway bars are still important. " __________________ "As I walk through the valley of rice i fear no honda, for i have torque!" My truck>http://http://67-72chevytrucks.com/v...d.php?t=418618

11-25-2012, 11:27 PM	#9
Justin36 Registered User Join Date: Dec 2009 Location: Selmer, Tennessee Posts: 744	Re: "Bittersweet" 83 dropmember blown LS 22s Awesome truck! Posted via Mobile Device __________________ Justin

12-04-2012, 03:04 PM	#10
volker Registered User Join Date: Oct 2007 Location: pittsburgh pa Posts: 95	Re: "Bittersweet" 83 dropmember blown LS 22s wilwood brakes came last week 14" 4 piston rear end should be back anyday i had it narrowed 5" and a 4:10 posi Attached Images

12-04-2012, 03:17 PM	#11
meter swinger Registered User Join Date: Apr 2009 Location: Kennewick WA. Posts: 1,437	Re: "Bittersweet" 83 dropmember blown LS 22s God bless, another sick C10. LOVE the wheels. That bed fabwork is awesome. Keep it coming im scribed. Posted via Mobile Device

12-14-2012, 11:22 AM	#12
Kainedogg Registered User Join Date: May 2012 Location: MacDill AFB\Tampa Posts: 151	Re: "Bittersweet" 83 dropmember blown LS 22s Subscribed for the finale.

12-28-2012, 11:01 PM	#13
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: "Bittersweet" 83 dropmember blown LS 22s updates? __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

12-29-2012, 10:20 AM	#14
moneyeater Registered User Join Date: Feb 2003 Location: Northern Germany,near Bremen Posts: 684	Re: "Bittersweet" 83 dropmember blown LS 22s Looks very good and matches my taste! Volker (thats my name) __________________ My little US vehicle parts business: http://www.thegearheaddepot.com/ Come have a look! ´81 GMC C 10, Spanish Red

01-03-2013, 12:49 PM	#15
volker Registered User Join Date: Oct 2007 Location: pittsburgh pa Posts: 95	Re: "Bittersweet" 83 dropmember blown LS 22s rear end is back its going in tonight , my wilwood brake petal with remote bottles showed up . i been working on the getting the bed straight the cowl panel i welded some of the vents closed to make them even and been welding on the bottom of the hood to fill in the holes Attached Images



Register or Log In To remove these advertisements.

01-03-2013, 12:50 PM	#16
volker Registered User Join Date: Oct 2007 Location: pittsburgh pa Posts: 95	Re: "Bittersweet" 83 dropmember blown LS 22s heres a few more Attached Images

02-10-2013, 06:08 PM	#17
volker Registered User Join Date: Oct 2007 Location: pittsburgh pa Posts: 95	Re: "Bittersweet" 83 dropmember blown LS 22s More pics coming tomorrow Posted via Mobile Device

02-10-2013, 06:17 PM	#18
Mad Rods Chevy Only Tx Join Date: May 2009 Location: Pecos,Tx Posts: 1,061	Re: "Bittersweet" 83 dropmember blown LS 22s Sweet build bro Posted via Mobile Device __________________ Chevy Only Tx.........

02-10-2013, 06:30 PM	#19
volker Registered User Join Date: Oct 2007 Location: pittsburgh pa Posts: 95	Re: "Bittersweet" 83 dropmember blown LS 22s Posted via Mobile Device

02-10-2013, 06:41 PM	#20
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: "Bittersweet" 83 dropmember blown LS 22s great looking build! __________________ Looking for a 67-72 swb or blazer project in or around VA.

02-10-2013, 11:38 PM	#21
74 stepside Registered User Join Date: Oct 2009 Location: SoCal Posts: 815	Re: "Bittersweet" 83 dropmember blown LS 22s Really nice ride you are building. Looking forward to seeing it completed.

02-10-2013, 11:42 PM	#22
meatwagon83 Registered User Join Date: Dec 2012 Location: Preble county ohio Posts: 1,914	Re: "Bittersweet" 83 dropmember blown LS 22s its a nice truck, i wouldnt have cut it up, but its still a nice truck, just dont put a real busy paintjob on it

02-11-2013, 03:13 PM	#24
volker Registered User Join Date: Oct 2007 Location: pittsburgh pa Posts: 95	Re: "Bittersweet" 83 dropmember blown LS 22s heres some updates Attached Images

02-11-2013, 03:17 PM	#25
volker Registered User Join Date: Oct 2007 Location: pittsburgh pa Posts: 95	Re: "Bittersweet" 83 dropmember blown LS 22s more pics Attached Images

Register or Log In To remove these advertisements.