What Would You Do With This Truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C20-67_N_MO · 07-31-2013, 04:30 PM

1970 Chevy C/10 Short wheel base solid, with only surface rust here and there. Has a '71/72 front grill as you can see, was a four speed truck with a removeable transmission hump currently. Standard gauages, no or unreadable glove box ID. Has a 'oh C*#$p handle on the glove box door, multiple color body panels, drum brakes all four corners. No current engine or tranny installed, have most part to throw it all back together.

So what all that being said what would you guys do to it?

Then I'll later tell you my plans for getting it operational.

MARKDTN · 07-31-2013, 04:59 PM

Can't see without pics.

I would put it back together cheap and drive it.

C20-67_N_MO · 07-31-2013, 05:05 PM

Yeah I know having issues loading them.

Thats better.

Ignore the other trucks please.

67ChevyRedneck · 07-31-2013, 05:30 PM

Sell it and drive the 4x4

(I couldn't ignore it...)

DGulliver · 07-31-2013, 05:33 PM

Looks like somebody loosely hung their parts pile together. I think I'd have about 6 trucks if I did that...

mmiddle · 07-31-2013, 06:41 PM

4 Wheel disc, LS3 E-Rod, 4L80E. air ride, but not slammed and notched!, nice fat steamrollers, power windows/locks, aftermarket gauges. factory buckets, hydra-boost, rack&pinion, tilt/cruse,delay,auto headlights, DRL, tonneau cover ect....
Exterior and balance of interior bone stock

This is the plan for my '70 minus the LS3 E-Rod.... I have a free 5.3L and a complete electrical system for a 1999 Z/71

Pathfinder · 07-31-2013, 07:07 PM

Throw some 5 spoke mags on there, put an upgraded 350 in it, spray it with a rattle can and enjoy it. I'm not much for "fancy" I guess!

**WIDESIDE72** · 07-31-2013, 07:29 PM

Paint it a solid color (looks like cab is hugged orange I ould go with that) if you have a engine trans laying around go with that. I currently have a 454/ 700r4 needing anhome like this). Otherwise I would drop a 5.3 LS/ 4l60e in it.
Posted via Mobile Device

67ctener · 07-31-2013, 07:45 PM

1. 4/6 ece drop
2. Rally's
3. 290hp gm crate motor
4. Fake patina
5. Drive the heck out of it
Posted via Mobile Device

C20-67_N_MO · 07-31-2013, 09:21 PM

Interesting choices so far.

Keep 'em coming.

*Mister-B* · 07-31-2013, 09:26 PM

I'd put a '69/'70 grille back on it, then maybe primer the whole thing, paint it your favorite color, then see if you can fake your own patina
Posted via Mobile Device

BigCountryx · 07-31-2013, 10:25 PM

I would give it to some poor ole chevy lover in south Louisiana if I were you.

eldogg · 08-01-2013, 01:05 AM

I'd do a really nice camo job on it. 5/7 drop, 15x6 & 15x8 truck rally's powder coated black, a small block with a big cam and drive it to death.
Posted via Mobile Device

C20-67_N_MO · 08-01-2013, 02:08 PM

I will be putting a '70 grill back in thats a given.

C20-67_N_MO · 08-03-2013, 07:20 AM

I have a 1990's truck roller 5.7L block, that is a roller motor. Going to throw in my 2201 Edelbrock camshaft, Add Eagle rotating forged assembly bored .30 over and build up.

Hoping to push 400+ once I'm done.

502ms · 08-03-2013, 10:43 AM

Definitely 6.0 LS swap with your choice of auto or manual transmission. Lower it 5/7. 20x12 rear 20x8.5 front wheels and get it one color
Posted via Mobile Device

67ctener · 08-03-2013, 11:19 AM

Quote:

Originally Posted by 502ms

Definitely 6.0 LS swap with your choice of auto or manual transmission. Lower it 5/7. 20x12 rear 20x8.5 front wheels and get it one color
Posted via Mobile Device

Have to agree this would be sik
Posted via Mobile Device

C20-67_N_MO · 08-03-2013, 11:25 AM

15" rims for now, and no drop as well.

71sierragrande · 08-03-2013, 11:33 AM

Whatever engine/trans combo you have is what Id use. 67 or 68 front clip(mostly because I have one laying around). 4/6 drop. Painted cab color w/black interior.

C20-67_N_MO · 08-03-2013, 12:12 PM

Going to row down the road the way you see it in the pictures for now.

Just want a power plant and auto tranny that's reliable before winter.

I'll then build up my performance engine to go in later with upgrade transmission and floor shifter. Removing the manual pedal for just the auto setup. Making sure all drum brakes work safely and no major suspension issues.

1972RedNeck · 08-03-2013, 02:37 PM

New bumper, cowl and a super strong BBC.

wreckedchevy · 08-03-2013, 05:41 PM

Holy crap it looks like my fleetside'd twin. love the color combo

Name: truckdriver.jpg
Views: 449
Size: 96.6 KB

C20-67_N_MO · 08-04-2013, 12:54 AM

Quote:

Originally Posted by wreckedchevy

Holy crap it looks like my fleetside'd twin. love the color combo

Attachment 1137765

LoL.

Mine's better looking cuz it's a fleetside.

C20-67_N_MO · 08-06-2013, 07:40 AM

This was etched in the wing window:

A bit hard to read.

The Just for fun God created Chevy Trucks

Mr Chevorlet · 08-06-2013, 09:17 AM

pretty good truck to build, I like it.

07-31-2013, 04:30 PM	#1
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	What Would You Do With This Truck 1970 Chevy C/10 Short wheel base solid, with only surface rust here and there. Has a '71/72 front grill as you can see, was a four speed truck with a removeable transmission hump currently. Standard gauages, no or unreadable glove box ID. Has a 'oh C#$p handle on the glove box door, multiple color body panels, drum brakes all four corners. No current engine or tranny installed, have most part to throw it all back together. So what all that being said what would you guys do to it? Then I'll later tell you my plans for getting it operational. __________________ Coming Soon:* Project 1970 Country Truck

07-31-2013, 04:59 PM	#2
MARKDTN Registered User Join Date: Jan 2011 Location: Chattanooga, TN Posts: 2,159	Re: What Would You Do With This Truck Can't see without pics. I would put it back together cheap and drive it. __________________ '83 K20-TPI '73 C10 '79 C10-ex-diesel(SOLD) '07 Tahoe(Son driving) '14 Suburban-DD '71 C10-current project

07-31-2013, 05:05 PM	#3
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: What Would You Do With This Truck Yeah I know having issues loading them. Thats better. Ignore the other trucks please. __________________ Coming Soon: Project 1970 Country Truck

07-31-2013, 05:30 PM	#4
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: What Would You Do With This Truck Sell it and drive the 4x4 (I couldn't ignore it...) __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

07-31-2013, 05:33 PM	#5
DGulliver Registered User Join Date: Jul 2009 Location: Southern TN Posts: 227	Re: What Would You Do With This Truck Looks like somebody loosely hung their parts pile together. I think I'd have about 6 trucks if I did that... __________________ '72 Chevrolet Step Side 350/TH350, '63 C10 Step V8 '74 Trans Am 400, '80 Trans Am Indy Pace Car Mercedes AMG S55, SLK230 Kompressor, GL450 '96 Dodge Indy Ram Official Indy Truck '99 Porsche 911 Carrera

07-31-2013, 06:41 PM	#6
mmiddle Registered User Join Date: Jul 2013 Location: Forestburg, Texas Posts: 659	Re: What Would You Do With This Truck 4 Wheel disc, LS3 E-Rod, 4L80E. air ride, but not slammed and notched!, nice fat steamrollers, power windows/locks, aftermarket gauges. factory buckets, hydra-boost, rack&pinion, tilt/cruse,delay,auto headlights, DRL, tonneau cover ect.... Exterior and balance of interior bone stock This is the plan for my '70 minus the LS3 E-Rod.... I have a free 5.3L and a complete electrical system for a 1999 Z/71 __________________ Mark Jesus is the Way! 2003 2500HD CCLB Duramax/Ali (Clifford) 2014 2SS/RS black on black Camaro (Betty) 2006 Pontiac SOLSTICE silver/black (Lula-Bell) 1970 C/10 Short Wide (Peggy) 1964 C/10 Short Step (Hambone) RIP Jimmy Hamilton Thank you for the trucks

07-31-2013, 07:07 PM	#7
Pathfinder Registered User Join Date: Jul 2013 Location: British Columbia Posts: 2	Re: What Would You Do With This Truck Throw some 5 spoke mags on there, put an upgraded 350 in it, spray it with a rattle can and enjoy it. I'm not much for "fancy" I guess!

07-31-2013, 07:29 PM	#8
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,500	Re: What Would You Do With This Truck Paint it a solid color (looks like cab is hugged orange I ould go with that) if you have a engine trans laying around go with that. I currently have a 454/ 700r4 needing anhome like this). Otherwise I would drop a 5.3 LS/ 4l60e in it. Posted via Mobile Device

07-31-2013, 07:45 PM	#9
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: What Would You Do With This Truck 1. 4/6 ece drop 2. Rally's 3. 290hp gm crate motor 4. Fake patina 5. Drive the heck out of it Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

07-31-2013, 09:21 PM	#10
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: What Would You Do With This Truck Interesting choices so far. Keep 'em coming. __________________ Coming Soon: Project 1970 Country Truck

07-31-2013, 09:26 PM	#11
Mister-B Account Suspended Join Date: Oct 2012 Location: Salt Lake City, Utah Posts: 3,331	Re: What Would You Do With This Truck I'd put a '69/'70 grille back on it, then maybe primer the whole thing, paint it your favorite color, then see if you can fake your own patina Posted via Mobile Device

07-31-2013, 10:25 PM	#12
BigCountryx Registered User Join Date: May 2009 Location: Gonzales, LA Posts: 779	Re: What Would You Do With This Truck I would give it to some poor ole chevy lover in south Louisiana if I were you. __________________ 1972 Pale Yella 2WD Blazer ..... 350HO/700R4.... '68 Clipped 1970 Original Paint SWB Farm Truck ..... 5.3/4L80.... 2x HRPT Participant

08-01-2013, 01:05 AM	#13
eldogg Registered User Join Date: May 2007 Location: Mooresville NC/Gainesville GA Posts: 499	Re: What Would You Do With This Truck I'd do a really nice camo job on it. 5/7 drop, 15x6 & 15x8 truck rally's powder coated black, a small block with a big cam and drive it to death. Posted via Mobile Device __________________ Eric Evans Queen City Shop Truck http://67-72chevytrucks.com/vboard/s...34#post6139834 66 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=543110

08-01-2013, 02:08 PM	#14
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: What Would You Do With This Truck I will be putting a '70 grill back in thats a given. __________________ Coming Soon: Project 1970 Country Truck

08-03-2013, 07:20 AM	#15
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: What Would You Do With This Truck I have a 1990's truck roller 5.7L block, that is a roller motor. Going to throw in my 2201 Edelbrock camshaft, Add Eagle rotating forged assembly bored .30 over and build up. Hoping to push 400+ once I'm done. __________________ Coming Soon: Project 1970 Country Truck



Register or Log In To remove these advertisements.

08-03-2013, 10:43 AM	#16
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: What Would You Do With This Truck Definitely 6.0 LS swap with your choice of auto or manual transmission. Lower it 5/7. 20x12 rear 20x8.5 front wheels and get it one color Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

08-03-2013, 11:25 AM	#18
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: What Would You Do With This Truck 15" rims for now, and no drop as well. __________________ Coming Soon: Project 1970 Country Truck

08-03-2013, 11:33 AM	#19
71sierragrande Petroleum User Join Date: Dec 2010 Location: San Diego, California Posts: 928	Re: What Would You Do With This Truck Whatever engine/trans combo you have is what Id use. 67 or 68 front clip(mostly because I have one laying around). 4/6 drop. Painted cab color w/black interior. __________________ 1971 GMC Sierra Grande 2WD 1/2 ton, 350/400 auto 2008 Chevy Silverado 2WD 1/2 ton LT1 5.3L auto

08-03-2013, 12:12 PM	#20
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: What Would You Do With This Truck Going to row down the road the way you see it in the pictures for now. Just want a power plant and auto tranny that's reliable before winter. I'll then build up my performance engine to go in later with upgrade transmission and floor shifter. Removing the manual pedal for just the auto setup. Making sure all drum brakes work safely and no major suspension issues. __________________ Coming Soon: Project 1970 Country Truck

08-03-2013, 05:41 PM	#22
wreckedchevy Registered User Join Date: Jun 2013 Location: billings, mt Posts: 703	Re: What Would You Do With This Truck Holy crap it looks like my fleetside'd twin. love the color combo __________________ 1969 Chevy C10 2wd stepside longbox

08-06-2013, 07:40 AM	#24
C20-67_N_MO Champagne Taste on Beer Budget Join Date: Dec 2008 Location: High Ridge, Missouri Posts: 2,190	Re: What Would You Do With This Truck This was etched in the wing window: A bit hard to read. The Just for fun God created Chevy Trucks Attached Images __________________ Coming Soon: Project 1970 Country Truck

08-06-2013, 09:17 AM	#25
Mr Chevorlet Rusty Nuts Join Date: Sep 2008 Location: Clever Missouri Posts: 1,338	Re: What Would You Do With This Truck pretty good truck to build, I like it. __________________ (Clever Missouri) Southwest Larry Mr Chevrolet My Build, The Marathon Truck http://67-72chevytrucks.com/vboard/s...d.php?t=604414

Register or Log In To remove these advertisements.