Door trim mount hardware question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

beau08 · 08-18-2014, 11:18 AM

My '70 C20 door trim (bottom) uses two types of mount hardware. Each end uses threaded type with nut and the other four are snap fit type. The snap type are not reusable so I wish to replace, but wanted some advise on which type to use. I can get the eom style or there are also a stick-on type and was wondering if anyone has an opinion on these? Thanks

**leddzepp** · 08-18-2014, 12:06 PM

OEM clip style work the best. If you use the stick on type, make sure to use 3M outdoor double sided tape. It is thinner and stronger than the adhesive strip that comes on them, and will adhere closer to the body. Nothing beats the metal clip on style IMO though

08-18-2014, 11:18 AM	#1
beau08 Registered User Join Date: Sep 2013 Location: Peoria, Az. Posts: 15	Door trim mount hardware question My '70 C20 door trim (bottom) uses two types of mount hardware. Each end uses threaded type with nut and the other four are snap fit type. The snap type are not reusable so I wish to replace, but wanted some advise on which type to use. I can get the eom style or there are also a stick-on type and was wondering if anyone has an opinion on these? Thanks __________________ '70 C20 Camper Special 400cid, a/c, pb, ps

08-18-2014, 12:06 PM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,996	Re: Door trim mount hardware question OEM clip style work the best. If you use the stick on type, make sure to use 3M outdoor double sided tape. It is thinner and stronger than the adhesive strip that comes on them, and will adhere closer to the body. Nothing beats the metal clip on style IMO though __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.