Thoughts on Jasper Engines or better alternative? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rykramer99 · 02-01-2015, 11:27 AM

My engine blew last weekend and I wanted to put in an LS but it's to expensive and I don't have the time to do it myself. The shop my truck is in recommended I put a jasper engine in. Any thoughts about these engines or a better alternative? Thanks

**Moreyel** · 02-01-2015, 01:15 PM

When I was in the auto repair business, I remember Jasper's were rebuilds. They always required the core. I dont know if they offer new or not.

Google crate engine. I recently put one in my Blazer. It was pretty straight forward and runs great. It wasnt much more then a rebuilt.

CalZephyr · 08-10-2017, 05:47 PM

Quote:

Originally Posted by Moreyel

When I was in the auto repair business, I remember Jasper's were rebuilds. They always required the core. I dont know if they offer new or not.

I know this is a couple of years old, but just wanted to add my experience. I just had a shop put a Jasper 350 in my '70 C20, and I kept my core with a core charge of $420.

Mike C · 08-12-2017, 05:24 PM

After my buddy's GM crate motor broke in his Typhoon and they replaced it including all the labor as well as the motor, oil cooler lines, and front diff that the errant rod took out, I couldn't imagine NOT buying the GM crate motor...

Maximus · 08-14-2017, 05:26 PM

I have heard great things about BluePrint engines, and I also have an ATK Rebuild (300I6 Ford truck engine) in my F100, no complaints with the ATK engine, it has about 20k miles, and runs fine, typical seals starting to leak from a 10 year old rebuilt I6.

If I was buying a 350 small block, and wasnt going with a GM Performance, I would probably try my luck with a BluePrint engine.

DemkoG · 08-15-2017, 10:36 AM

I have used 3 blue print motors for mild builds, all 302 from speed way. I have been and so have the guys with the broncos are happy. All the motors have a few thousand miles on them and run grate. Best $3500 motor out their.

http://www.speedwaymotors.com/BluePr...Pan,43358.html

I am sure their 350 is just as good. Not crazy power but they were not drag cars.

02-01-2015, 11:27 AM	#1
Rykramer99 Registered User Join Date: Jan 2015 Location: San Diego, CA Posts: 31	Thoughts on Jasper Engines or better alternative? My engine blew last weekend and I wanted to put in an LS but it's to expensive and I don't have the time to do it myself. The shop my truck is in recommended I put a jasper engine in. Any thoughts about these engines or a better alternative? Thanks

02-01-2015, 01:15 PM	#2
Moreyel Senior Member Join Date: Jun 2013 Location: Cedar Crest, NM Posts: 200	Re: Thoughts on Jasper Engines or better alternative? When I was in the auto repair business, I remember Jasper's were rebuilds. They always required the core. I dont know if they offer new or not. Google crate engine. I recently put one in my Blazer. It was pretty straight forward and runs great. It wasnt much more then a rebuilt. __________________ 72 Blazer, 70 El Camino SS, Anniversary HD FatBoy, 2020 Ram 2500, 80 Vette, 65 Chevy 3/4 Ton 4 W/D Pickup and some more. Wife: 06 GMC Duramax 3500 4WD Single Wheel Next: Rust removal on my Blazer. Thinking of putting a 50 Chevy cab on a 76 Chev 4 WD pickup. Members Met: Aldtime, DeadheadNM

08-12-2017, 05:24 PM	#4
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,723	Re: Thoughts on Jasper Engines or better alternative? After my buddy's GM crate motor broke in his Typhoon and they replaced it including all the labor as well as the motor, oil cooler lines, and front diff that the errant rod took out, I couldn't imagine NOT buying the GM crate motor... __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

08-14-2017, 05:26 PM	#5
Maximus Registered User Join Date: Feb 2011 Location: Santa Rosa, CA Posts: 672	Re: Thoughts on Jasper Engines or better alternative? I have heard great things about BluePrint engines, and I also have an ATK Rebuild (300I6 Ford truck engine) in my F100, no complaints with the ATK engine, it has about 20k miles, and runs fine, typical seals starting to leak from a 10 year old rebuilt I6. If I was buying a 350 small block, and wasnt going with a GM Performance, I would probably try my luck with a BluePrint engine. __________________ 1955 2nd Series 3100 - 400 Pontiac / BW Super T-10 4-Speed 1972 K5 Blazer 350 Auto 4x4 1928 Ford Model A Tudor

08-15-2017, 10:36 AM	#6
DemkoG Registered User Join Date: Nov 2013 Location: Suffield CT Posts: 55	Re: Thoughts on Jasper Engines or better alternative? I have used 3 blue print motors for mild builds, all 302 from speed way. I have been and so have the guys with the broncos are happy. All the motors have a few thousand miles on them and run grate. Best $3500 motor out their. http://www.speedwaymotors.com/BluePr...Pan,43358.html I am sure their 350 is just as good. Not crazy power but they were not drag cars.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.