|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-08-2013, 08:38 PM
|
#1 |
|
Registered User
Join Date: Dec 2010
Location: Mars Hill, NC
Posts: 1,994
|
1960-61 sail panels and back of cab trim removal?
I've found a 60 Chevy locally that guy is going to part out and it has the sail panels and the piece of trim that goes under the back window...I'm usually a 67-72 guy and was wondering what all is needed and how do you remove without tearing up? Any help would be greatly appreciated
|
|
|
|
11-08-2013, 09:54 PM
|
#2 |
|
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: 1960-61 sail panels and back of cab trim removal?
the sail panels are held in w/4 phillips screws and the cab trim has 7 clips that press in like most side trim. you may be able to access the back of the back cab trim clips from inside if the tank is removed. its fairly easy
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
|
|
|
|
11-08-2013, 10:11 PM
|
#3 |
|
Registered User
 Join Date: Aug 2010
Location: Burbank CA
Posts: 3,055
|
Re: 1960-61 sail panels and back of cab trim removal?
The rear edge of the sail panels are secured by sliding forward slightly into a hidden retainer which is screwed to the side of the cab. This retainer will not be visible until the two exposed screws at the front edge of the panel and one screw at the rear wrap around are removed and the sail trim is pulled outward (only in front) and then pushed rearward, releasing it from the cab. With the trim panel off, the hidden retainer can be removed easily.
Last edited by oem4me; 11-09-2013 at 02:10 AM. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
