Harmonic Balancer ?s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hooker · 04-21-2007, 07:15 PM

I have a 69swb with 350.... Right now i have a 2 barrell but in the next few months i will have a 4 barrell carb.... I went to Orielly Auto parts to look at new harmonic balancers cause mine wobbles a little.... Well we were looking in the computer and there is 2 different ones.... There is one for the 2 barrell and one for the 4 barrell... is there any differance? Can i put a 4 barrell one on while i have a 2 barrell carb? Thanks!

piecesparts · 04-21-2007, 07:23 PM

I guess I never thought of it that way. In most of my experiences, the balancer depended on what size they were. There were the 6" ones and then there were the 8" ones. Either one will work, as long as you have the appropriate pointer for that size.

Hooker · 04-21-2007, 09:52 PM

ttt

**truckdude239** · 04-21-2007, 10:54 PM

try this site here i ordered a balancer for my 305 for 30 buxs www.partstrain.com

JimKshortstep4x4 · 04-22-2007, 08:26 AM

As piecesparts stated there were different diameter balancers. I would suggest measuring your balancer and if it is 8" then the 4 bbl balancer should fit. If your balancer measures 6" then you can either change the pointer setup to enable the use of the 8" or get another 6" balancer.

Jim

Hooker · 04-22-2007, 06:38 PM

Anyone else?

cdowns · 04-22-2007, 06:46 PM

before buying a new balancer i'd inspect my crankshaft to make sure it's not worn to where any balancer is going to wobble

SEVENTY1 · 04-25-2007, 09:57 AM

Quote:

Originally Posted by cdowns

before buying a new balancer i'd inspect my crankshaft to make sure it's not worn to where any balancer is going to wobble

Sorry to hijack your thread, but I had a similar incident last week, where my balancer and pulley became loose from the crankshaft. The screw and key that hold the harmonic balancer to the crankshaft came out. This past weekend when I tried installing the balancer it did not go in with pressure. It's pretty loose, does that mean that I have to pull my engine out to replace the crankshaft? I'm going to replace the harmonic balancer first and hopefully it's the balancer that got worn out from the inside and not the crankshaft. Has anyone had this problem before?

Hooker · 04-25-2007, 03:42 PM

ttt again

04-21-2007, 07:15 PM	#1
Hooker aka TEX-TOY Join Date: Jan 2007 Location: Kentucky Posts: 127	Harmonic Balancer ?s I have a 69swb with 350.... Right now i have a 2 barrell but in the next few months i will have a 4 barrell carb.... I went to Orielly Auto parts to look at new harmonic balancers cause mine wobbles a little.... Well we were looking in the computer and there is 2 different ones.... There is one for the 2 barrell and one for the 4 barrell... is there any differance? Can i put a 4 barrell one on while i have a 2 barrell carb? Thanks! __________________ 1969 Chevy C10 SWB w/ disk brakes and soon to be lowered with spindles and springs!!!! Getting a paint job like a Army Chinook Helicopter!!!! HOOKERS RULE!! BRAND NEW WIFE BOUGHT IT FOR ME AS A WEDDING GIFT!!! SHE IS THE BOMB!!!!!!

04-21-2007, 07:23 PM	#2
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Harmonic Balancer ?s I guess I never thought of it that way. In most of my experiences, the balancer depended on what size they were. There were the 6" ones and then there were the 8" ones. Either one will work, as long as you have the appropriate pointer for that size.

04-21-2007, 09:52 PM	#3
Hooker aka TEX-TOY Join Date: Jan 2007 Location: Kentucky Posts: 127	Re: Harmonic Balancer ?s ttt __________________ 1969 Chevy C10 SWB w/ disk brakes and soon to be lowered with spindles and springs!!!! Getting a paint job like a Army Chinook Helicopter!!!! HOOKERS RULE!! BRAND NEW WIFE BOUGHT IT FOR ME AS A WEDDING GIFT!!! SHE IS THE BOMB!!!!!!

04-21-2007, 10:54 PM	#4
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,233	Re: Harmonic Balancer ?s try this site here i ordered a balancer for my 305 for 30 buxs www.partstrain.com __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube

04-22-2007, 08:26 AM	#5
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Re: Harmonic Balancer ?s As piecesparts stated there were different diameter balancers. I would suggest measuring your balancer and if it is 8" then the 4 bbl balancer should fit. If your balancer measures 6" then you can either change the pointer setup to enable the use of the 8" or get another 6" balancer. Jim __________________ 1971 Shortbox step side 4x4, 350 sbc, 3:07 rear end 1965 Impala SS 400 sbc, Muncie rock crusher 1966 Impala SS 396 bbc, TH 400 1969 El Camino, 350 sbc, TH 350 1971 Snowplow built on a Blazer frame 1972 GMC Short bed, stepside, TH 400, 427 BBC

04-22-2007, 06:38 PM	#6
Hooker aka TEX-TOY Join Date: Jan 2007 Location: Kentucky Posts: 127	Re: Harmonic Balancer ?s Anyone else? __________________ 1969 Chevy C10 SWB w/ disk brakes and soon to be lowered with spindles and springs!!!! Getting a paint job like a Army Chinook Helicopter!!!! HOOKERS RULE!! BRAND NEW WIFE BOUGHT IT FOR ME AS A WEDDING GIFT!!! SHE IS THE BOMB!!!!!!

04-22-2007, 06:46 PM	#7
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Harmonic Balancer ?s before buying a new balancer i'd inspect my crankshaft to make sure it's not worn to where any balancer is going to wobble __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY

04-25-2007, 03:42 PM	#9
Hooker aka TEX-TOY Join Date: Jan 2007 Location: Kentucky Posts: 127	Re: Harmonic Balancer ?s ttt again __________________ 1969 Chevy C10 SWB w/ disk brakes and soon to be lowered with spindles and springs!!!! Getting a paint job like a Army Chinook Helicopter!!!! HOOKERS RULE!! BRAND NEW WIFE BOUGHT IT FOR ME AS A WEDDING GIFT!!! SHE IS THE BOMB!!!!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.