picked up some furniture today. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

no_rice · 01-29-2013, 02:39 PM

well, the other day we went and picked up a box to chop up and make a bench seat out of it to use on our new deck i built this summer. plan to actually have some cushions made and make it fairly comfortable.
Name: 550011_10151260030372449_1888936953_n.jpg
Views: 750
Size: 38.9 KB

Name: 550011_10151260030372449_1888936953_n.jpg
Views: 750
Size: 38.9 KB

so then yesterday i picked up a whole 70 c10 to turn into more furniture and wall art... as well as strip a few parts out of it for my 70 gmc. the dash will go on the wall, and the frontend will either be a shelf or an entertainment center it seems. and the box of course, another bench for the deck.
Name: 2013-01-289517_21_40.jpg
Views: 721
Size: 69.0 KB

Name: 2013-01-289517_21_40.jpg
Views: 721
Size: 69.0 KB

Name: 2013-01-299508_33_46.jpg
Views: 718
Size: 69.7 KB

Name: 2013-01-299508_33_34.jpg
Views: 721
Size: 61.7 KB

Name: 2013-01-299508_34_02.jpg
Views: 725
Size: 63.3 KB

no_rice · 01-29-2013, 02:40 PM

Name: 2013-01-299508_34_33.jpg
Views: 717
Size: 62.2 KB

Name: 2013-01-299508_36_34.jpg
Views: 721
Size: 68.3 KB

it runs and drives. but the carb is messed up. a shot of ether to start it but once its running its got enough oomp yet to do a burn out...! lol.

ill swap the good heater switches into my gmc, as well as the black carpet(assuming it looks worth it once i pull it out) maybe the black armrests for now until i get my hands on the aqua green ones i need. probably the heater core/fan mount under the hood since mine has been fiber-glassed back together by someone. and the kick panels look good so they may end up in mine.

was glancing at the spid, it has heavy duty front suspension and rear. i did see it had the coils with those single half a leaf over loads on it. tires look damn near new except for the nail in one...rims would be worth cleaning and painting but mine has been converted to 5 lug... and of course now that i bought a power steering setup from someone, this truck has it in it...

and then maybe recoup a little bit back out of some of the stuff left on it before it gets hauled to the junker. hell the motor runs decent beside a little smoke. someone will buy it! lol.

mydixiewrecked · 01-29-2013, 04:36 PM

My dad made a couch out of the rear of a Cadillac. Taillights even work. It's sitting in his automotive shops lobby
Posted via Mobile Device

Towstrap · 01-29-2013, 05:06 PM

Lots of pics
Posted via Mobile Device

JointTech · 01-29-2013, 08:26 PM

dude that bed is better than mine

daves72C10D · 01-29-2013, 08:33 PM

Yea, we need some picts to make sure this happened.....

no_rice · 01-29-2013, 09:59 PM

Quote:

Originally Posted by JointTech

dude that bed is better than mine

Which box? The green one has a lot of inner fender wall and floor rust but front and back are good. The orange one is much rougher then it looks. Pass side is very rusty, and the wood floor is torn up.

Quote:

Originally Posted by daves72C10D

Yea, we need some picts to make sure this happened.....

There will be pics, but it will be awhile probably. To many projects and plus ill probably wait for the weather to get a little nicer out consistently before I start on that stuff.
Posted via Mobile Device

Olive1970 · 01-29-2013, 10:09 PM

Quote:

Originally Posted by JointTech

dude that bed is better than mine

I was thinking the same thing until I saw the post about rust. Even if it wasnt rusted through it would still be better than mine!

**Dieselwrencher** · 01-29-2013, 10:19 PM

This will be a cool project. I would like to a tail gate bench, and a bed rear 1/4 couch some day.

CMH77 · 01-30-2013, 12:35 AM

I can't find a decent 69-70 grill around me to put on my truck and you guys are hanging them on your walls...

**GJB** · 01-30-2013, 12:39 AM

^Second that^

Scott>72-GMC · 01-30-2013, 12:48 AM

I knew there would be a few tears to this thread along with thumbs up. It's not a gmc so I'm cool with it :P
Posted via Mobile Device

Desert.Chevy · 01-30-2013, 12:59 AM

Any pictures of your furniture or pictures of furniture that inspired you.
Posted via Mobile Device

72 K20 · 02-02-2013, 07:06 PM

Any pictures of your furniture or pictures of furniture that inspired you?

What He said !
X2

sboris · 02-02-2013, 07:57 PM

Seen this the other day.. I'm thinking I would do maybe some period correct vinyl for the cushion .
http://67-72chevytrucks.com/vboard/s...d.php?t=563709
Posted via Mobile Device

2Cav · 02-02-2013, 10:29 PM

Can't wait to see your furniture projects!

If your not going to use it, I might could make you an offer on the trim off the 70. I am missing almost everything drivers side on my 69 and a fair bit passenger side. PM me if your not going to use it.

Thanks,
Jeff

no_rice · 02-03-2013, 08:56 PM

Quote:

Originally Posted by sboris

Seen this the other day.. I'm thinking I would do maybe some period correct vinyl for the cushion .
http://67-72chevytrucks.com/vboard/s...d.php?t=563709
Posted via Mobile Device

one of my friends was in the store today. they want $950 for it so my guess wasnt to far off of what the would want... they also apparently built a chair with the scraps left over... $650.

heres a few, there are all kids of ideas around!
Name: 100_6573.jpg
Views: 195
Size: 40.2 KB

Name: 100_6573.jpg
Views: 195
Size: 40.2 KB

Name: IMG_4726.jpg
Views: 200
Size: 56.8 KB

Name: tailgatebed.jpg
Views: 194
Size: 58.8 KB

Name: WALL ART 025.jpg
Views: 200
Size: 49.8 KB

01-29-2013, 02:39 PM	#1
no_rice Registered User Join Date: Oct 2012 Location: nevada iowa Posts: 285	picked up some furniture today. well, the other day we went and picked up a box to chop up and make a bench seat out of it to use on our new deck i built this summer. plan to actually have some cushions made and make it fairly comfortable. so then yesterday i picked up a whole 70 c10 to turn into more furniture and wall art... as well as strip a few parts out of it for my 70 gmc. the dash will go on the wall, and the frontend will either be a shelf or an entertainment center it seems. and the box of course, another bench for the deck.

01-29-2013, 02:40 PM	#2
no_rice Registered User Join Date: Oct 2012 Location: nevada iowa Posts: 285	Re: picked up some furniture today. it runs and drives. but the carb is messed up. a shot of ether to start it but once its running its got enough oomp yet to do a burn out...! lol. ill swap the good heater switches into my gmc, as well as the black carpet(assuming it looks worth it once i pull it out) maybe the black armrests for now until i get my hands on the aqua green ones i need. probably the heater core/fan mount under the hood since mine has been fiber-glassed back together by someone. and the kick panels look good so they may end up in mine. was glancing at the spid, it has heavy duty front suspension and rear. i did see it had the coils with those single half a leaf over loads on it. tires look damn near new except for the nail in one...rims would be worth cleaning and painting but mine has been converted to 5 lug... and of course now that i bought a power steering setup from someone, this truck has it in it... and then maybe recoup a little bit back out of some of the stuff left on it before it gets hauled to the junker. hell the motor runs decent beside a little smoke. someone will buy it! lol.

01-29-2013, 04:36 PM	#3
mydixiewrecked Registered User Join Date: Jan 2013 Location: Olympia WA Posts: 8	Re: picked up some furniture today. My dad made a couch out of the rear of a Cadillac. Taillights even work. It's sitting in his automotive shops lobby Posted via Mobile Device

01-29-2013, 05:06 PM	#4
Towstrap Registered User Join Date: Oct 2006 Location: davison Mich Posts: 247	Re: picked up some furniture today. Lots of pics Posted via Mobile Device

01-29-2013, 08:26 PM	#5
JointTech Registered User Join Date: Feb 2012 Location: Mission Viejo, CA Posts: 1,856	Re: picked up some furniture today. dude that bed is better than mine __________________ 72 C20 Long Bed SB350 TH400 14 bolt rear end Extremely boring build thread

01-29-2013, 08:33 PM	#6
daves72C10D Registered User Join Date: Mar 2004 Location: Vale, NC Posts: 283	Re: picked up some furniture today. Yea, we need some picts to make sure this happened..... __________________ 1972 Custom 10 Deluxe- original paint, interior- 72k miles http://www.cardomain.com/ride/2466316 Cheap, Fast or Good. Pick any two. 1990 Eagle Talon AWD 1991.5 W250 CTD 1992 Cushman Truckster- Haulster

01-29-2013, 10:19 PM	#9
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: picked up some furniture today. This will be a cool project. I would like to a tail gate bench, and a bed rear 1/4 couch some day. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-30-2013, 12:35 AM	#10
CMH77 Registered User Join Date: Sep 2012 Location: Springfield, IL Posts: 71	Re: picked up some furniture today. I can't find a decent 69-70 grill around me to put on my truck and you guys are hanging them on your walls...

01-30-2013, 12:39 AM	#11
GJB Active Member Join Date: Jan 2013 Location: Olympia, Washington Posts: 197	Re: picked up some furniture today. ^Second that^

01-30-2013, 12:48 AM	#12
Scott>72-GMC Registered User Join Date: Jan 2013 Location: New providence ia Posts: 1,018	Re: picked up some furniture today. I knew there would be a few tears to this thread along with thumbs up. It's not a gmc so I'm cool with it :P Posted via Mobile Device

01-30-2013, 12:59 AM	#13
Desert.Chevy Registered User Join Date: Nov 2012 Location: Earth Posts: 338	Re: picked up some furniture today. Any pictures of your furniture or pictures of furniture that inspired you. Posted via Mobile Device

02-02-2013, 07:06 PM	#14
72 K20 Registered User Join Date: Mar 2011 Location: Brandon,Iowa Posts: 391	Re: picked up some furniture today. *Any pictures of your furniture or pictures of furniture that inspired you?* What He said ! X2

02-02-2013, 07:57 PM	#15
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,017	Re: picked up some furniture today. Seen this the other day.. I'm thinking I would do maybe some period correct vinyl for the cushion . http://67-72chevytrucks.com/vboard/s...d.php?t=563709 Posted via Mobile Device __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

02-02-2013, 10:29 PM	#16
2Cav Registered User Join Date: Jan 2013 Location: St Louis Mo Posts: 22	Re: picked up some furniture today. Can't wait to see your furniture projects! If your not going to use it, I might could make you an offer on the trim off the 70. I am missing almost everything drivers side on my 69 and a fair bit passenger side. PM me if your not going to use it. Thanks, Jeff __________________ St. Louis, Mo 1969 C10 2011 Dodge Charger R/T (custom)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.