FL WTB 54-55 1st Bellhousing crossmember

[mrf1002u]

Wanting to buy a 54 or early 55 crossmember for under the engine/bellhousing. 250 swap planned and I want to keep the sm420. Been told that is the right animal for the job.

Larry W.

[MidLifer]

Did they differ in 54-55 from the other AD years? I did a T5 swap in my 50 and may still have the crossmember laying around. Should I go up to my parts loft and look or were they different?

[mrf1002u]

Midlifer,

The way I understand it, the 54 and early 55 are unique, although the 60's look similar, they must be different in shape and or width.

Here is a pic of a 50 3600 crossmember... compare it to the 54 I posted before. Please note that the picured bellhousing and crossmember do not go together. The bellhousing goes to the very first pic in this post and further down where they are shown together again. Sorry for the confusion.

I have seen pics of one modified, but it was heavily modified, I'd rather avoid that. The 54-55.1 is made to work with this bellhousing, which will bolt to a 230, 250, 292, and newer V-8's.

Someone correct me if any of this is wrong, please.

If you still have yours, I may be interested. Can you get a pic?

Thanks,
Larry W.

[mrf1002u]

Originally Posted by MidLifer

Did they differ in 54-55 from the other AD years? I did a T5 swap in my 50 and may still have the crossmember laying around. Should I go up to my parts loft and look or were they different?

Midlifer,

Sorry I read your post wrong. From what I know, your 50 would look like my 53, not the first one I posted from a 54.

Thanks

[youngrodder]

Originally Posted by mrf1002u

Midlifer,

Sorry I read your post wrong. From what I know, your 50 would look like my 53, not the first one I posted from a 54.

Thanks

I think I have one of these that I tore off my 53 Suburban. I will take a picture of what mine looks like. I'm in MI so shipping might not be the cheapest.

Marc

[mrf1002u]

Originally Posted by youngrodder

I think I have one of these that I tore off my 53 Suburban. I will take a picture of what mine looks like. I'm in MI so shipping might not be the cheapest.

Marc

By all means, snap a pic. I have relatives in Ohio. That would help.

Thanks.

[youngrodder]

Originally Posted by mrf1002u

By all means, snap a pic. I have relatives in Ohio. That would help.

Thanks.

OK, I will try to grab one at lunch.

Marc

[MidLifer]

OK well my crossmember is definitely the earlier type. Good luck with the hunt for a later one.

[mrf1002u]

Originally Posted by MidLifer

OK well my crossmember is definitely the earlier type. Good luck with the hunt for a later one.

Really appreciate the effort.

Larry W.

[mrf1002u]

Originally Posted by mrf1002u

Wanting to buy a 54 or early 55 crossmember for under the engine/bellhousing. 250 swap planned and I want to keep the sm420. Been told that is the right animal for the job.

Larry W.

Hoping I do not make things worse........but here is the right bellhousing and the right crossmember from a 1954 to early 1955 truck, together.

The angled feet of the bellhousing fit on rubber mounts that go into the larger holes on the crossmember. The 53 down crossmember doesn't have the right holes in it and I assume has a different shape or drop to it.

Thanks,
Larry W.

[mrf1002u]

...

[mrf1002u]

Thanks,

Found one.

Larry W.