The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-30-2008, 04:37 PM   #1
white_paper_180
Registered User
 
white_paper_180's Avatar
 
Join Date: Jun 2007
Location: Lethrbidge alberta
Posts: 55
Angry Ls1 Swap

Okay, i bought a 2001 ls1 out of a camaro, my plans being to swap it into a 1972 chevy c10. I bought CPP perch engine mounts, and the adapter plates to swith the engine mount style over. I just finally got around to tes fitting the engine and now im having major clerance problems with the oil pan touching the front crossmember. I also had to take my stock exhaust manifolds off to get it close to fitting. im a little pissed for two reasons, one - i wanted to use my stock manifolds 2 - it doesnt f'n fit!!. I just spent 2 hours trying to find a solution on here, but i cant find anything. These are my thoughts, let me know what you think. Drill new holes and mount the perch mounts about 1.5"s back, or notch the crossmember. or spend a bunck of money and get new mounts. How did you guys get your engine to fit????
white_paper_180 is offline   Reply With Quote
Old 11-30-2008, 04:50 PM   #2
Ackattack
Senior Member
 
Ackattack's Avatar
 
Join Date: Aug 2002
Location: Valley Center KS
Posts: 3,525
Re: Ls1 Swap

I used some tubular engine stand from some place along with stock 73+ motor mounts. I then made some adapter plates to mount the motor mounts to the engine. Dropped right in and no clearance issues with the oil pan.

I'm using some Camaro/Trans Am headers and didn't have an issue with them either, so I can't say what to do with your manifolds.
Ackattack is offline   Reply With Quote
Old 11-30-2008, 06:20 PM   #3
white_paper_180
Registered User
 
white_paper_180's Avatar
 
Join Date: Jun 2007
Location: Lethrbidge alberta
Posts: 55
Re: Ls1 Swap

Quote:
Originally Posted by Ackattack View Post
I used some tubular engine stand from some place along with stock 73+ motor mounts. I then made some adapter plates to mount the motor mounts to the engine. Dropped right in and no clearance issues with the oil pan.

I'm using some Camaro/Trans Am headers and didn't have an issue with them either, so I can't say what to do with your manifolds.
Do you have any pictures you could send me? are you using the same engine as me?
white_paper_180 is offline   Reply With Quote
Old 11-30-2008, 09:26 PM   #4
STOCKISH
Formerly- 1972SuperCheyenne
 
STOCKISH's Avatar
 
Join Date: Oct 2008
Location: Wake Forest NC
Posts: 5,782
Re: Ls1 Swap

Cadillac CTS-V oil pan and pick-up tube.
STOCKISH is offline   Reply With Quote
Old 11-30-2008, 10:58 PM   #5
white_paper_180
Registered User
 
white_paper_180's Avatar
 
Join Date: Jun 2007
Location: Lethrbidge alberta
Posts: 55
Re: Ls1 Swap

Update, i drilled two holes in the crossmember, roughly 1.5 inchs back, and presto, it fit perfect. I messured against the firewall aswell and it should look awesome. thanks for the input everyone.. i took some pictures, i'll put them up here
white_paper_180 is offline   Reply With Quote
Reply

Bookmarks

Tags
1972, chevy truck, crossmember, ls1, mounts


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:38 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com