68 C10 Project FROSTBYTE Extreme Dropmember

[ridinlow68]

Long time user, first time poster. I've been on this forum for many years waiting for the opportunity to be able to start a build thread, and that day has finally come. I'm gonna ramble on here a little bit, but bear with me, there will be pictures!

I bought my truck about 7 years ago from NV because here in Maine most everything is complete rust. The PO had already started on rebuilding the truck so the frame had already been cleaned up, but the body had not been touched, other than being completely disassembled when I bought it. Since I bought it, I have had it in storage waiting for the time to come where I could afford to build my truck the way I wanted it to be built.

A couple months ago I got on the phone with Dave over at Porterbuilt Street Rods and ordered up my full Extreme front and rear Dropmember kit along with an Accuair I-level air management system. Well last week, those parts finally arrived and man, do those guys over at Porterbuilt do an amazing job! I also ordered up a couple other things that have finally arrived, one of those things being CPP's Big Brake Kit. And another being Michigan Metal Work's upper and lower control arms. Both things look amazing and I can't wait to get them mocked up.

So here's where I am at with this build. My frame is completely stripped down and ready to go, hopefully this weekend I can get started on it. Below are some photos of when I got the truck 7 years ago, in a sort of complete way and now with the frame completely disassembled. I've also included a render I did of the route I'm thinking I want to go. Ok enough talk, here are the pics of the truck and frame.

Peace,
Rick

[ridinlow68]

And here's some pics of some parts and the render!

[C10-Rat]

Like the render,,, nice and clean !!

[mjensen]

Looks like an awesome project!

[ridinlow68]

Originally Posted by C10-Rat

Like the render,,, nice and clean !!

Thanks!

Originally Posted by mjensen

Looks like an awesome project!

Thanks, I can't wait to get started, it's been a long time coming!

[69CST-V]

Looks like you have a great start and a good plan. Keep us posted
Posted via Mobile Device

[82swb]

Count me in! Great start.
Posted via Mobile Device

[chicksdigit]

A lot of those parts look familiar! I like the plans for this build, can't wait to see it complete!
Posted via Mobile Device

[1stchevy]

Nice parts pile to start with, rendering is killer.
Posted via Mobile Device

[ridinlow68]

Originally Posted by 69CST-V

Looks like you have a great start and a good plan. Keep us posted
Posted via Mobile Device

Originally Posted by 82swb

Count me in! Great start.
Posted via Mobile Device

Originally Posted by chicksdigit

A lot of those parts look familiar! I like the plans for this build, can't wait to see it complete!
Posted via Mobile Device

Originally Posted by 1stchevy

Nice parts pile to start with, rendering is killer.
Posted via Mobile Device

Thanks guys! I'm waiting on the big brown truck to drop off something else today! I can't wait to post some pics of what they are!

In the meantime, I wanted to show you something a buddy made for me at his machine shop he works at. They're the caps for my upper control arms. I won't be putting them on for a while, but they'll make great paper weights for now.

[ridinlow68]

So UPS finally arrived tonight! And look what showed up!

Here are the specs: they are Bonspeed Big Blocks, 20x8.5 w/5.25 BS for the front and 22x10 w/5.5 BS for the rear. They're polished hoops with brushed metal centers. They look amazing! I'm so happy with how them came out! I'm going to be running Nitto NT420S for tires, 255/40/20 for the front and 285/35/22 for the rear. Should have the tires mounted by the end of next week.

[Rochlow]

Wow!! That's some high end stuff!!
Posted via Mobile Device

[chicksdigit]

Lovin' that wheel selection, plus those caps will look great as a replacement to the "M" that come with the arms.
Posted via Mobile Device

[lolife99]

Another quality build!
Very well thought out.

[ridinlow68]

Originally Posted by Rochlow

Wow!! That's some high end stuff!!
Posted via Mobile Device

Thanks! When I saw these rims, I knew I had to get them and then Bonspeed had a Buy 3 Get 1 Free deal and that put them in range of my budget!

Originally Posted by chicksdigit

Lovin' that wheel selection, plus those caps will look great as a replacement to the "M" that come with the arms.
Posted via Mobile Device

Thanks! The caps are pretty awesome, it's the small details that will make it my truck.

Originally Posted by lolife99

Another quality build!
Very well thought out.

Thanks! I've been thinking about this build for about 7 years now so I've had some time to nail down what I want in my truck.

[darkhorse970]

Very nice plan, I'm in.

[67_C-30]

Awesome build! I'm just beginning a bagged '68 SWB project myself. What color is actually going to be? (I'll can't if it's blue or gunmetal in the rendering)

[ridinlow68]

Originally Posted by darkhorse970

Very nice plan, I'm in.

Thanks!

Originally Posted by 67_C-30

Awesome build! I'm just beginning a bagged '68 SWB project myself. What color is actually going to be? (I'll can't if it's blue or gunmetal in the rendering)

Nice! I've had the render in Photoshop and I've been playing around with colors for quite a while. Right now, I'm thinking the color is going to be somewhere along the lines of a dark blue, like slate blue, and maybe a little desaturated, so that's why it's looking a little like gunmetal too. It's a blue you don't see everyday…I hope!

[67_C-30]

Originally Posted by ridinlow68

Thanks!



Nice! I've had the render in Photoshop and I've been playing around with colors for quite a while. Right now, I'm thinking the color is going to be somewhere along the lines of a dark blue, like slate blue, and maybe a little desaturated, so that's why it's looking a little like gunmetal too. It's a blue you don't see everyday…I hope!

Very cool! My boss painted his '67 Chevelle a color similiar to that. It is a factory '09Toyota Tundra color, but it works on his car. It is certainly an unusual color for a muscle car. In certain light, it looks dark grey and in other light it looks more dark blue than grey.

[ridinlow68]

Originally Posted by 67_C-30

Very cool! My boss painted his '67 Chevelle a color similiar to that. It is a factory '09Toyota Tundra color, but it works on his car. It is certainly an unusual color for a muscle car. In certain light, it looks dark grey and in other light it looks more dark blue than grey.

Yea, that's a really nice color! I think the blue I'm going for might be a little lighter than that, but I got plenty of time to figure that out! haha

[jlaird]

I'll be watching this one! I've always wondered how curved those spokes are on those wheels. Can you take a picture from an angle that shows the curvature of the spoke?

Josh
Posted via Mobile Device

[ridinlow68]

Originally Posted by jlaird

I'll be watching this one! I've always wondered how curved those spokes are on those wheels. Can you take a picture from an angle that shows the curvature of the spoke?

Josh
Posted via Mobile Device

Yea, definitely, I'll try and grab that angle today. They are curved slightly, but nothing too much. They way they are cut makes they appear more curved then they are.

[mad2rass]

Your build is going to be awesome!
Posted via Mobile Device

[Bomp]

Got my attention.
Im In.

[ridinlow68]

Originally Posted by jlaird

I'll be watching this one! I've always wondered how curved those spokes are on those wheels. Can you take a picture from an angle that shows the curvature of the spoke?

Josh
Posted via Mobile Device

Hey Josh, here's a couple close ups of the curvature of the spokes. I think these show it pretty well. I'm sure there will be many more pics to come of the rims! I just want to look at them all day! haha