![]() |
![]() |
#1 |
Old Shovel Rider
Join Date: Oct 2007
Location: Rain City, WA.
Posts: 117
|
HEI for a 6 Banger
Anyone got any suggestions on where to get a good deal on an HEI distributor for a straight 6 ??
I have a buddy who's building one. He just got the block and head back from the machine shop, so it will be a few days 'til he needs it. I did a quick check on Ebay and found some, but they're way too expensive. I paid a lot less for a V8 dizzy. Last edited by DB Smith; 11-04-2008 at 03:43 PM. |
![]() |
![]() |
![]() |
#2 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: HEI for a 6 Banger
I bought one at the local Junkyard for $25.00 .I installed it just like I got it.I turned the rotor the same way as the points dist was when I pulled it.Timing wound up being about 2* off.It made a world of difference in driveability.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" |
![]() |
![]() |
![]() |
#3 |
Senior Member
![]() Join Date: Jul 2008
Location: kennewick, WA
Posts: 1,508
|
Re: HEI for a 6 Banger
i bought a points elimanator kit and it never failed me, but i heard that the later model stock hei ditributors are the way to go.
|
![]() |
![]() |
![]() |
#4 | |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: HEI for a 6 Banger
Quote:
![]() A brand new HEI shouldn't be more than $120 at any parts store. Keep checking the local yards and you should be able to find one.
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jan 2006
Location: Dallas
Posts: 504
|
Re: HEI for a 6 Banger
Yeah the stock unit puts out plenty of juice. I went stock. There's better ways to give them more power. Make sure to get the low rise cap with the external coil (Yes, it's still HEI) if you plan on getting AC for compressor clearance.
![]()
__________________
_______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club |
![]() |
![]() |
![]() |
#6 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: HEI for a 6 Banger
Funny, I was just thinking about possibly putting on my AC brackets and swapping out the internal HEI for external on my Camaro...
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... Last edited by Brad; 11-04-2008 at 09:58 PM. |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Oct 2004
Location: Sonoma, CA
Posts: 318
|
Re: HEI for a 6 Banger
DB Smith, PM sent.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,284
|
Re: HEI for a 6 Banger
You might try Tom Langdon's:
www.stoveboltengineco.com
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
![]() |
![]() |
![]() |
#9 |
vw guy & now c-10 guy
![]() Join Date: Sep 2008
Location: Louisville,KY
Posts: 483
|
Re: HEI for a 6 Banger
The 68 truck I just bought has a 250 I6 with an HEI distributor, what year and model do you guys use to buy cap/rotor and plug wires? Do you still use the same spark plugs that you were running with points? same gap? thanks...
|
![]() |
![]() |
![]() |
#10 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: HEI for a 6 Banger
They came on cars and trucks at least in the range of '73-'78 and at some point went to the computer controlled HEI's. Just go to any parts store and get one for a C-10 in that range and you'll be good to go. Gap plugs to .045 or so and drive like ya stole it!
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
![]() |
![]() |
![]() |
#11 |
vw guy & now c-10 guy
![]() Join Date: Sep 2008
Location: Louisville,KY
Posts: 483
|
Re: HEI for a 6 Banger
thanks brad, and btw, cool truck
![]() |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Jan 2006
Location: Dallas
Posts: 504
|
Re: HEI for a 6 Banger
I think when I went in the truck searches didn't come up with the external coil, but I could be remembering wrong. I do know I asked for a 75 Nova, and they got it for me.
__________________
_______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club |
![]() |
![]() |
![]() |
#13 |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: HEI for a 6 Banger
Can you explain how it affected the driveability?
I had thought of converting mine some time back, but read that there wasn't that much of a diffrence between the points and the HEI as far as gas mileage, power, etc., so I kept mine stock. |
![]() |
![]() |
![]() |
#14 | |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: HEI for a 6 Banger
Quote:
![]() ![]() ![]()
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... Last edited by Brad; 11-05-2008 at 09:18 PM. |
|
![]() |
![]() |
![]() |
#15 |
Registered User
Join Date: Jan 2006
Location: Dallas
Posts: 504
|
Re: HEI for a 6 Banger
![]()
__________________
_______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club |
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Oct 2007
Location: Tucson, Az
Posts: 172
|
Re: HEI for a 6 Banger
I just tried searching for a hei dis with the external coil and did not have any luck. any one got a part #
|
![]() |
![]() |
![]() |
#17 | |
Active Member
![]() Join Date: Jul 2007
Location: Centrally located between Houston, Austin and Waco. BCS area.
Posts: 7,947
|
Re: HEI for a 6 Banger
Quote:
Well, it may be total ![]() ![]() Can you be more specific other than the BS stuff? Like how much gain in hp or mpg on a 250 six cylinder. |
|
![]() |
![]() |
![]() |
#18 | |
Senior Member
![]() Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,284
|
Re: HEI for a 6 Banger
Quote:
www.stoveboltengineco.com I don't know the p/n, could be the title is the part nunber.
__________________
Every 25 years I like to rebuild that 292, whether it needs it or not. |
|
![]() |
![]() |
![]() |
#19 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: HEI for a 6 Banger
Sorry, I don't have any documented proof or dyno results, just seat o' the pants performance results along with better starting, mpg's, trouble free use, no points adjustment, etc...
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Jan 2006
Location: Dallas
Posts: 504
|
Re: HEI for a 6 Banger
You might want to call your local parts store too and let them look it up, mine was around $100 too.
__________________
_______________ Thomas '78 Silverado '74 Monte Carlo '47 Teardrop Trailer East Texas Classics Local Club |
![]() |
![]() |
![]() |
#21 | |
Registered User
![]() Join Date: Aug 2008
Location: Central TX
Posts: 393
|
Re: HEI for a 6 Banger
Quote:
"Suggest extended tip design spark plugs which are designated by a "Y" suffix on Champion brand or "S" suffix on AC Delco brand. Suggested gap on these plugs is .60"-.80" for improved idle and low speed driveability". I used 8 mm Borg Warner HEI plug wires. |
|
![]() |
![]() |
![]() |
#22 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: HEI for a 6 Banger
Interesting....I'm just using the stock plugs. Let us know how it performs, and how the plugs look.
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
![]() |
![]() |
![]() |
#23 | |
Old Shovel Rider
Join Date: Oct 2007
Location: Rain City, WA.
Posts: 117
|
Re: HEI for a 6 Banger
Quote:
Thanks, 68OS....That looks like the one we need. ![]() ![]() http://www.stoveboltengineco.com/aca...?productid=125 The internal coil type was what I thought we'd use, but they are way overpriced...$225 http://cgi.ebay.com/ebaymotors/HEI-C...Q5fAccessories Last edited by DB Smith; 11-09-2008 at 05:36 PM. |
|
![]() |
![]() |
![]() |
#24 |
Old Shovel Rider
Join Date: Oct 2007
Location: Rain City, WA.
Posts: 117
|
Re: HEI for a 6 Banger
Last edited by DB Smith; 11-09-2008 at 05:35 PM. |
![]() |
![]() |
![]() |
#25 |
Out of the carpool lane.
Join Date: Jan 2000
Location: Clark Co, WA
Posts: 5,673
|
Re: HEI for a 6 Banger
Nope, that's a totally different animal....and ends up being $88 with shipping anyway.
__________________
1968 C-10 SWB, 5.7 Vortec/700R4/3.73 posi, Torch Red 1968 Camaro, 250/Powerglide, all original (No, I'm not gonna drop a 350 in it!...Jeez!) 2000 Honda VFR in the faster yellow! 2008 Husqvarna TE-610 1967 C-10 SWB 'Six Appeal'-Gone but not forgotten... |
![]() |
![]() |
![]() |
Bookmarks |
|
|