|
05-25-2002, 11:33 PM
|
#1 |
|
Back from the Dead
Join Date: Dec 2001
Location: Salem, Oregon
Posts: 522
|
A Couple Questions
My first is regarding installing a FloorShifter in my 72' Chevy Pickup. I have a TH350 Transmission and I was wondering what all is involved in doing this modification? I assume you need to get a steering column from a non-automatic truck, how hard are these to come by? This would be my first floor shifter install, and I have been told it isn't too difficult a task, yet any help on doing this mod would be a great help!
My second question is that I have been having a heck of a time trying to find a "Phantom" style Billet grille for my 72'. I have found numerous regular style inserts, but not a Phantom-Style that covers the headlights as well. If anyone knows were I can find one that would be great as well! Any help on either of these questions is greatly appreciated. If you do have a replacement steering column for a reasonable price, please email me at b-man@hang-ten.com Thanks! Kenny ------------------ Current Ride; 72' Chevy C-10 SWB 2wd, 350/th350, Edelbrock Performer Intake & 600Carb, Heddman Headers, Fed. Mogul RV Cam, Cast 1.94/1.50 Heads, B&M HoleShot Torque Converter and Shiftkit, Soon to receive dual 2.5" Flowmaster 40 Series and a B&M Megashifter Salem, Oregon
__________________
The only Carb that matters to me is the one under my hood! Salem, Oregon |
|
|
|
05-26-2002, 01:12 AM
|
#2 |
|
Registered User
Join Date: Aug 2001
Location: rock island,il,usa
Posts: 5,382
|
On the column ,you need to look for a 3/4 or 1 ton 4 spd unit to get that smooth look. I used a B&M shifter, & it wasnt bad to install,should have some instruction with it. I cant say where to look for the phantom grill,but there are some guys on the board that have done that mod........very sharp ! good luck......69 longhorn.
__________________
http://community.webshots.com/user/hotrodhorn |
|
|
|
|
05-27-2002, 08:10 AM
|
#3 |
|
Senior Member
 Join Date: Mar 2000
Location: Rockville,In. USA
Posts: 3,721
|
Any 67-72 4spd truck column will work for a smooth column including 1/2ton, and any 4spd van column through 80.
You can also get a new remanufactured tilt 4spd column through us http://www.gmcpauls.com/steering2.htm We don't keep the Phantom grill in stock but I have gotten them for others in the past. Drop me a line at robbinspd1199@yahoo.com I'll be glad to help. They are salty though at twice the price of a standard billet grill for a 71-72 GMCPaul |
|
|
|
|
05-27-2002, 07:19 PM
|
#4 |
|
Back from the Dead
Join Date: Dec 2001
Location: Salem, Oregon
Posts: 522
|
Thanks for the help, I was wondering if instead of buying a whole or complete column if i could modify my current one and add one of these: http://cgi.ebay.com/ebaymotors/ws/eB...tem=1831539964
I later did a little more digging and found out how much the phantom grilles run...maybe I'll have to stick with a regular billet! Thanks Again! Kenny 
__________________
The only Carb that matters to me is the one under my hood! Salem, Oregon |
|
|
|
|
05-27-2002, 07:42 PM
|
#5 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,693
|
 That's how I plan on doing it. I have one, and may have access to another. |
|
|
|
|
05-27-2002, 08:06 PM
|
#6 |
|
Back from the Dead
Join Date: Dec 2001
Location: Salem, Oregon
Posts: 522
|
Sounds good, this mod might be closer than I thought! Does anyone ahve pics of a MegaShifter in their truck? If so please post them!
Kenny One of these interiors is waht I ultimatly dream of!
__________________
The only Carb that matters to me is the one under my hood! Salem, Oregon |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
