Anyone make replacement roofskins? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Blue85 · 09-03-2004, 02:49 PM

Just curious, does any company have replacement roofskins for 67-72 trucks? I have virtually rust free cab from a 1 ton grain truck(always shedded), but it has the cab marker lights, and my bodyman told me it would just as easy to change the skin instead of smoothing off the lights.

64fleetside · 09-03-2004, 04:03 PM

Find another bodyman, its not hard to weld up holes. Much easier than fixing rust. Brian

slogo · 09-03-2004, 04:20 PM

I agree with your bodyman it would be as easy just to replace the top. either way it going to be a lot of work but you could drill out the spot welds in the seams for a nicer job and less filler. just find a cab with a good top and cut it out. not sure if the make a replacement skin for the top yet. while your in there just shave the drip rails and the seam at the back of the top.

HuggerCST · 09-03-2004, 04:35 PM

Quote:

Originally Posted by 64fleetside

Find another bodyman, its not hard to weld up holes. Much easier than fixing rust. Brian

64fleetside- He probably has the roof with the raised hump around each light. A used roof skin shouldn't be hard to find. At least they aren't around here. I have several doners. I don't think anyone makes a reproduction skin. A used skin should be cheap, but getting someone to cut off what you need, box it up, and ship it that far will drive up the cost a bit. Check with Mothertruckers. I think he sells used ones, but I'm not sure. I would help with one of mine, but will be busy, and won't have the time in the next few weeks.

64fleetside · 09-03-2004, 05:46 PM

My bad-forgot 67-72 had those little "pads" they sit on. Too bad you're so far away, I have a 72 I'm scrapping, has nice roof-but that's about it. Brian

09-03-2004, 02:49 PM	#1
Blue85 Oilfield Trash Join Date: Sep 2003 Location: Raymore, Sk, Canada, Earth Posts: 3,171	Anyone make replacement roofskins? Just curious, does any company have replacement roofskins for 67-72 trucks? I have virtually rust free cab from a 1 ton grain truck(always shedded), but it has the cab marker lights, and my bodyman told me it would just as easy to change the skin instead of smoothing off the lights. __________________ 14 Dodge 3500 Mega Cab 08 Dodge 3500 Mega Cab 87 Chev 3+3 4x4 80 GMC K10 High Sierra bone stock 70 Chevelle 350SS long term project 68 GMC 3ton Grain Truck/Garbage wagon 50 Pontiac 2 Door Coupe Project "I've got a shotgun rifle and a 4 wheel drive and a country boy can survive" Hank Jr.

09-03-2004, 04:03 PM	#2
64fleetside Registered User Join Date: Apr 2004 Location: arkieland Posts: 1,070	Find another bodyman, its not hard to weld up holes. Much easier than fixing rust. Brian

09-03-2004, 04:20 PM	#3
slogo Registered User Join Date: Mar 2003 Location: Morristown,TN Posts: 482	I agree with your bodyman it would be as easy just to replace the top. either way it going to be a lot of work but you could drill out the spot welds in the seams for a nicer job and less filler. just find a cab with a good top and cut it out. not sure if the make a replacement skin for the top yet. while your in there just shave the drip rails and the seam at the back of the top.

09-03-2004, 05:46 PM	#5
64fleetside Registered User Join Date: Apr 2004 Location: arkieland Posts: 1,070	My bad-forgot 67-72 had those little "pads" they sit on. Too bad you're so far away, I have a 72 I'm scrapping, has nice roof-but that's about it. Brian



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.