![]() |
Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Nov 2000
Location: Huntsville Ontario Canada
Posts: 4,052
|
Project 67 Pics. Finished (kinda)
Here are some pics. I still need the carpet when it arrives, a few bolts in the box floor and a bit of wet sanding and polishing. Black seat belts would be perfered nut not easy to find. I am runnning hedman chevelle shortys PN68600 1 5/8" primary into 3" exhaust over the stock tranny crossmember into Super 40's. It's tucked above the frame rails. Northwest Auto Fab motor mounts are a must. They move the motor to the 6 cyl position. Battery is on the frame behind the pass side cab coroner. it's a 355 and a 700R. Awesome setup. Tires are 8" rallys with 275/60's and the front are 7" van rallys with 255 60's I think the fronts are too wide they scrub the pavement. Full lock turns are omost impossible. I need to change them to a narrower tire. No frame or inner fender rubbing at all. Seat is from a 98 with the headrest removed and recovered in leather.
If you have anyother questions feel free to ask I would love to help you out.
__________________
1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD Last edited by 72MARIO; 07-24-2005 at 09:05 PM. |
![]() |
![]() |
Bookmarks |
|
|