GA 1970 chevy truck parting out - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**heehawracing** · 02-06-2015, 07:27 PM

1970 c10 PS,PB A/C
A/C BRACKETS 150.00 SHIPPED
POWER STEERING PUMP AND BRACKETS 100.00 SHIPPED
POWER STEERING BOX 100.00 SHIPPED

**derotoreut** · 02-06-2015, 07:35 PM

Looks like a pretty nice truck to be parting out. Interested in the front grill (outer & inner) if original 70 style with horizontal bars. Any pictures? Also how are bumpers?

bluek5 · 02-06-2015, 07:38 PM

How much for the center a/c vent to 84043 ? How is the dash pad and door panels?
Thanks, Paul

solman · 02-06-2015, 07:40 PM

nice looking truck!! I just picked up a 69 C20. How much for the set of chromeblack trim pieces on both sides of the truck? Are they being parted out?
thanx

**heehawracing** · 02-06-2015, 07:50 PM

Front bumper 150.00 shipped its stright has normal scratches
center a/c vent 30.00 shipped its nice orginal condition
door panels nice driver condition normal wear comes with the armrest 175.00 shipped
more pictures on the way

REEDS 72 · 02-06-2015, 07:59 PM

Tail light harness cond cuts,splices?up close pics pls.

**heehawracing** · 02-06-2015, 08:01 PM

Pictures

**heehawracing** · 02-06-2015, 08:03 PM

The grill and rear bumper is no good

**heehawracing** · 02-06-2015, 08:18 PM

Quote:

Originally Posted by solman

nice looking truck!! I just picked up a 69 C20. How much for the set of chromeblack trim pieces on both sides of the truck? Are they being parted out?
thanx

the trim is all there but just in ok condition

**praisegeetarman** · 02-06-2015, 08:18 PM

How about a price for the complete A/C system front to back shipped to Washington state, 98933? Don't need the compressor brackets or any of the vents in the dash, but do need the actual ducting behind the dash.

thanks,

Keith

**heehawracing** · 02-06-2015, 08:23 PM

do you need the a/c hoses this air is in working condition

**praisegeetarman** · 02-06-2015, 08:27 PM

Quote:

Originally Posted by heehawracing

do you need the a/c hoses this air is in working condition

I could use them. Is the system still R12, or has it been converted to R134?

solman · 02-06-2015, 08:28 PM

Quote:

Originally Posted by heehawracing

the trim is all there but just in ok condition

how much for the set all around the. ok is fine, I'm just getting started and doing a poor man's restore, so mainly just want the pieces, not trying to do a pristine restore, just have a complete (although rough) truck

**heehawracing** · 02-06-2015, 08:33 PM

Quote:

Originally Posted by solman

how much for the set all around the. ok is fine, I'm just getting started and doing a poor man's restore, so mainly just want the pieces, not trying to do a pristine restore, just have a complete (although rough) truck

ill take 100.00 plus shipping for all of it but i will need to check on shipping because the bed trim is so long

**heehawracing** · 02-06-2015, 08:36 PM

Quote:

Originally Posted by praisegeetarman

I could use them. Is the system still R12, or has it been converted to R134?

ir is r 12 ill take 375.00 shipped for both boxes duct work and the hoses

**derotoreut** · 02-06-2015, 08:40 PM

Quote:

Originally Posted by heehawracing

The grill and rear bumper is no good

Is inner grill cracked?

**heehawracing** · 02-06-2015, 08:41 PM

inner grill is cracked

**praisegeetarman** · 02-06-2015, 08:43 PM

Quote:

Originally Posted by heehawracing

ir is r 12 ill take 375.00 shipped for both boxes duct work and the hoses

The rubber lines have to be changed out for conversion to R134, so I can't use those. So, I can use the evap. box, the heater core box, the metal ac lines, and all the ducting under the dash? How about the condenser and all the metal lines to and from? If it's a working system can I get the compressor also? Vacuum actuators for the venting? Controls in the dash?

thanks

solman · 02-06-2015, 08:46 PM

Quote:

Originally Posted by heehawracing

ill take 100.00 plus shipping for all of it but i will need to check on shipping because the bed trim is so long

could we please do that? I'm a newbie on the forums, so how do we do this? am i allowed to give you my phone number so we can solidify the deal? please let me know about the shipping cost- but I'm not rushing you, just want to make sure i can get the set

**heehawracing** · 02-06-2015, 08:48 PM

Quote:

Originally Posted by praisegeetarman

The rubber lines have to be changed out for conversion to R134, so I can't use those. So, I can use the evap. box, the heater core box, the metal ac lines, and all the ducting under the dash? How about the condenser and all the metal lines to and from? If it's a working system can I get the compressor also? Vacuum actuators for the venting? Controls in the dash?

thanks

all that for 525.00 shipped

**praisegeetarman** · 02-06-2015, 09:02 PM

Quote:

Originally Posted by heehawracing

all that for 525.00 shipped

Sounds very fair. I'll take all of it.

Since I am putting A/C in a non A/C blazer I could also use all the little things I am not thinking of right now. Here's a few other things off the top of my head.

Plastic vacuum canister and all the lines if they are still good
A/C battery tray (if it is good)
Receiver/dryer mount (I'll need to get a new one for the R134)
grommets from the firewall and radiator support

basically, anything my non A/C blazer does not have.

I'll send a PM for the details.

thanks,

Keith

**heehawracing** · 02-06-2015, 09:23 PM

Quote:

Originally Posted by solman

could we please do that? I'm a newbie on the forums, so how do we do this? am i allowed to give you my phone number so we can solidify the deal? please let me know about the shipping cost- but I'm not rushing you, just want to make sure i can get the set

you can call me if you want 770 468 7776 most of the time i can estimate shipping and be real close but the bed trim is very long so i will measure the long ones and get a shipping

**heehawracing** · 02-06-2015, 09:28 PM

Quote:

Originally Posted by praisegeetarman

Sounds very fair. I'll take all of it.

Since I am putting A/C in a non A/C blazer I could also use all the little things I am not thinking of right now. Here's a few other things off the top of my head.

Plastic vacuum canister and all the lines if they are still good
A/C battery tray (if it is good)
Receiver/dryer mount (I'll need to get a new one for the R134)
grommets from the firewall and radiator support

basically, anything my non A/C blazer does not have.

I'll send a PM for the details.

thanks,

Keith

sounds good

**heehawracing** · 02-06-2015, 09:46 PM

Quote:

Originally Posted by solman

could we please do that? I'm a newbie on the forums, so how do we do this? am i allowed to give you my phone number so we can solidify the deal? please let me know about the shipping cost- but I'm not rushing you, just want to make sure i can get the set

heres a picture of the wood bed i made with plywood great for a low budget

chevroletman223 · 02-06-2015, 09:47 PM

how much for all the shift linkage? shipped to 13438. Thanks, Dan

02-06-2015, 07:27 PM	#1
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	1970 chevy truck parting out 1970 c10 PS,PB A/C A/C BRACKETS 150.00 SHIPPED POWER STEERING PUMP AND BRACKETS 100.00 SHIPPED POWER STEERING BOX 100.00 SHIPPED Attached Images

02-06-2015, 07:35 PM	#2
derotoreut Roto Reuter thats the name... Join Date: Feb 2010 Location: Darien, NY Posts: 1,853	Re: 1970 chevy truck parting out Looks like a pretty nice truck to be parting out. Interested in the front grill (outer & inner) if original 70 style with horizontal bars. Any pictures? Also how are bumpers? __________________ ~ Dan My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977

02-06-2015, 07:38 PM	#3
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 1970 chevy truck parting out How much for the center a/c vent to 84043 ? How is the dash pad and door panels? Thanks, Paul Last edited by bluek5; 02-06-2015 at 07:39 PM. Reason: Questions

02-06-2015, 07:40 PM	#4
solman Registered User Join Date: Feb 2015 Location: winston-salem, nc Posts: 6	Re: 1970 chevy truck parting out nice looking truck!! I just picked up a 69 C20. How much for the set of chromeblack trim pieces on both sides of the truck? Are they being parted out? thanx

02-06-2015, 07:50 PM	#5
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1970 chevy truck parting out Front bumper 150.00 shipped its stright has normal scratches center a/c vent 30.00 shipped its nice orginal condition door panels nice driver condition normal wear comes with the armrest 175.00 shipped more pictures on the way Attached Images

02-06-2015, 07:59 PM	#6
REEDS 72 Registered User Join Date: Apr 2011 Location: AMERICAN FORK, UTAH Posts: 535	Re: 1970 chevy truck parting out Tail light harness cond cuts,splices?up close pics pls.

02-06-2015, 08:01 PM	#7
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1970 chevy truck parting out Pictures Attached Images

02-06-2015, 08:03 PM	#8
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1970 chevy truck parting out The grill and rear bumper is no good

02-06-2015, 08:18 PM	#10
praisegeetarman Senior Member Join Date: Feb 2010 Location: Harrah, Washington Posts: 323	Re: 1970 chevy truck parting out How about a price for the complete A/C system front to back shipped to Washington state, 98933? Don't need the compressor brackets or any of the vents in the dash, but do need the actual ducting behind the dash. thanks, Keith __________________ 71 Blazer 4X4 (unmolested, all original (including paint) 74,000 mile barn find) 67 Camaro RS SS (unmolested, all original (including paint) 81,000 mile barn find) Keith Riel

02-06-2015, 08:23 PM	#11
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1970 chevy truck parting out do you need the a/c hoses this air is in working condition

02-06-2015, 08:41 PM	#17
heehawracing Senior Member Join Date: Jun 2010 Location: senoia ga Posts: 3,202	Re: 1970 chevy truck parting out inner grill is cracked

02-06-2015, 09:47 PM	#25
chevroletman223 Dan Join Date: Dec 2009 Location: Remsen, NY Posts: 230	Re: 1970 chevy truck parting out how much for all the shift linkage? shipped to 13438. Thanks, Dan __________________ 1968 C10 Short Fleet - L79 327, th350 1971 Nova - 327, Th350, 3.73 posi 1971 K10 Short fleet - 350/350 1971 K20 longbox - 350, 4spd 1970 Chevelle, Tunnel ram set up 355, th350 1986 C30 Dually, 454/400 1967 Impala 4 door hardtop, Supernatural clone 1968 Camaro, 327, pwerglide 1967 camaro, numbers match 350, powerglide, bench seat car 1968 Nova, Numbers match 6cyl, powerglide 1968 Nova, 327, th350 1970 Impala, 350, Th350 1968 Impala, Numbers match 350, Th350 1971 Chevelle SS, Numbers match 350, muncie



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.