![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Nov 2018
Location: monroe michigan
Posts: 11
|
![]()
I am having trouble bleeding my brakes. i cannot get a wrench on the front bleeder screws because of their location. My brake pedal goes pretty much to the floor before i begin to stop.
__________________
Zachary M. Sefcovic ![]() —— 1970 C10 454 BBC +0.030 over, TH400 - lowered |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Sep 2011
Location: Ark City, Kansas
Posts: 3,333
|
Re: cant get a wrench on front bleeder screw
Another reason to convert to disc brakes....
Sorry, to compound your ordeal...the simplest way I know to remedy this deal, is to take a die grinder and grind a relief in the spindle. It's so tight, making the grinding a challenge also... |
![]() |
![]() |
![]() |
#3 |
Registered User
![]() Join Date: Jul 2015
Location: 2nd left past the stump on a dirt road.
Posts: 2,629
|
Re: cant get a wrench on front bleeder screw
Its pretty simple.
1. Use a deep well 6 point socket to first ensure the bleeder is loose. Sometimes I tighten them just a hair and undo. 2. Take the appropriate 12 point box end and bend it approx. 1/2 to 1 inch from the box end at an angle. I prefer the box end to a line wrench due to the strength being a bit better. Pic coming. I have used this tool for years, BUILT NOT BOUGHT! |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Jul 2015
Location: 2nd left past the stump on a dirt road.
Posts: 2,629
|
![]()
Motto I try to live by is "You have to be smarter than the tool."
Get er Done! |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Jun 2002
Location: Tucson AZ by way of WI & CA
Posts: 509
|
Re: cant get a wrench on front bleeder screw
Hate to say this, but go to Harbor Freight and buy the 7pc brake tool set. It will set you back a whole $20, but comes with all the tools to deal with brake springs, bleeders and adjusting wheels. The wrenches might be a bit flimsy to break a stuck bleeder loose, but they are 6pt and can take a bit of torque.
|
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Jul 2019
Location: New Boston, NH
Posts: 456
|
Re: cant get a wrench on front bleeder screw
Yes it's a pain withe brake hose right against it. Amazing the things they do! I ground down a wrench so it would give me a little room. Bending it would be better as shown above but I did get it to work.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jun 2018
Location: Louisiana
Posts: 185
|
Re: cant get a wrench on front bleeder screw
I had the same problem. Then I picked up a metric deep well socket.
10mm.
__________________
'72 Chevy Custom Deluxe Highlander. Med Olive/White 350/200 ps,pb and Air Conditioning! |
![]() |
![]() |
![]() |
#8 | |
Registered User
![]() Join Date: Jul 2015
Location: 2nd left past the stump on a dirt road.
Posts: 2,629
|
Re: cant get a wrench on front bleeder screw
Quote:
![]() |
|
![]() |
![]() |
![]() |
Bookmarks |
Tags |
1970, 1970 c10, bleeding brakes, brakes, c10 |
|
|