C-notch/adjustable ECE super track bar question

[Sklptrljay]

I just installed a c-notch, and on the passenger side I can't get the axle up as far as I want because of the adjustable panhard bar bracket.

I called ECE and they said that they have had people tell them it is an issue.

My question is what have others done in this situation.

I can definitely cut off a corner of the bracket, but I thought before I did, I would see if someone had a better idea, like moving the bracket somehow.

[stomper]

I added a 1-1/2 drop block and then also had to put the bar in the bottom hole and trim the bracket. Now my axle sits on the notch when I air out.

[Sklptrljay]

*Update*

I put the bracket on the bottom of the trailing arm and it is all good now. Had to trim the end of the trailing arm, I think I'll run a weld down the seam of it just to make sure it doesn't separate.