![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Aug 2005
Location: Tennyson, Indiana 47637
Posts: 137
|
Edelbrock Carb and Brake Booster Vaccuum Line
I am getting ready to install power brakes on my truck. The back of my carb has the plug screwed in the back and I am unable to find any fitting that would allow me to connect a vaccuum hose into that vaccuum inlet. Do any of you know what the part number for that connector would be or what I can do? Any help is appreciated, thanks.
__________________
72 Chevy Short Bed Fleet: 350/TH350 - Sold - Now trying to sell the parts that I have left over. _______________________ 2006 VW GTI |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: Mar 2004
Location: Lexington, KY
Posts: 865
|
Re: Edelbrock Carb and Brake Booster Vaccuum Line
I just got an old fitting from a spare carb and it worked fine. You may want to make a run to autozone and ask to see their fittings. They will have a set of boxes in the back with fittings that should work.
|
![]() |
![]() |
![]() |
#3 |
Account Suspended
Join Date: Mar 2003
Location: ** THE FALL GUY **CHICAGO IL
Posts: 5,883
|
Re: Edelbrock Carb and Brake Booster Vaccuum Line
yea take the carb to ace hardware the hole should be 3/8x16 or 18 you shold be able to find the correct fitting to do the job... mark
![]() |
![]() |
![]() |
![]() |
#4 |
GEARHEAD
Join Date: Aug 2003
Location: MN
Posts: 6,122
|
Re: Edelbrock Carb and Brake Booster Vaccuum Line
I just used a plastic vacuum line Tee that will fit various size hose. I got it at Napa, it was on one of those little isle stands that rotate. That way I was able to run multiple lines of varying size from the same fitting.
HG
__________________
If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 ![]() 72 ![]() HG's Plow Truck '78 ![]() Bigass Farm Truck HG's thread of miscellaneous stuff |
![]() |
![]() |
![]() |
#5 |
Active Member
![]() Join Date: May 2005
Location: San Jose, CA
Posts: 235
|
Re: Edelbrock Carb and Brake Booster Vaccuum Line
I bent up a brake line (dont remember the size, sorry) and got the line close to the booster, then clamped on a piece of hose to the brake line and the booster.
Jason ________ VAPIR NO2 Last edited by Jayss109; 04-27-2011 at 11:39 PM. |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: Edelbrock Carb and Brake Booster Vaccuum Line
there should be a vaccume port on the manifold directly in back of the carb then you get a fitting from any autoparts store and hook to the booster just like they did from the factory
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
Bookmarks |
|
|