Transmissiin linkage help! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rusty69 · 06-10-2013, 01:37 AM

I am getting a borg-warner 4 speed from a Chevy car to put in the rusty 69. I have a friend that has all the pedal set and linkage stuff from an 80s Chevy truck. My question is, is the 80s stuff the same as the 67-72 stuff or can it be made to work? Also, a hydraulic throwout bearing kit is about $100. What are the thoughts on that route. I browsed through the forum to see if the linkage question had been asked but didn't find anything. Thanks for the help.
[size=1]Posted via Mobile Device[/siz

06-10-2013, 01:37 AM	#1
Rusty69 Registered User Join Date: Jun 2013 Location: Wetumpka, al Posts: 76	Transmissiin linkage help! I am getting a borg-warner 4 speed from a Chevy car to put in the rusty 69. I have a friend that has all the pedal set and linkage stuff from an 80s Chevy truck. My question is, is the 80s stuff the same as the 67-72 stuff or can it be made to work? Also, a hydraulic throwout bearing kit is about $100. What are the thoughts on that route. I browsed through the forum to see if the linkage question had been asked but didn't find anything. Thanks for the help. [size=1]Posted via Mobile Device[/siz Last edited by Rusty69; 06-10-2013 at 01:39 AM. Reason: Dang auto correct



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.