smoothed cowl panel for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

modifiedGMC · 08-05-2005, 07:41 PM

I have a cowl panel that has been filled and smoothed on the outer two openings and the antenna hole. Holes were filled with sheet metal (donated from an old hood) then filled with bondo filler. The two center openings were left open for air to enter. If you have a cowl hood or scoop the two center openings will be hidden behind the scoop. It still may need a little sanding work done but is already smooth. I'm asking $50 (negotiable or trade for??) plus shipping. I'm not sure exactly what year it's from but is between 67 to 72. The second picture is of my truck before and after mine was installed. I wanted to list it here before putting it on e-bay this weekend. P/M me but First come first served.

MINE

modifiedGMC · 08-06-2005, 10:11 AM

last call it, will go on e-bay later today. Price is negotiable or might trade.

decade22ten · 08-06-2005, 10:59 AM

Hi. would you take $25.00 plus ride or trade for my original cowl piece?

modifiedGMC · 08-07-2005, 12:35 PM

decade22ten: PM sent

woodman13 · 08-07-2005, 01:33 PM

Still for sale? If so I'll take it. $25 plus shipping.

modifiedGMC · 08-07-2005, 03:27 PM

sale pending waiting on reply from decade22ten

woodman13 · 08-07-2005, 04:41 PM

Ok, just let me know.....would look kewl on my new 69.....

modifiedGMC · 08-12-2005, 10:15 AM

Last call for it. Couple of people wanted it but decided not to. Thought I'd give it one more shot on here. Post or Send p/m with zip for shipping quote.

Putter · 08-12-2005, 10:30 AM

Any chance to get a picture of the underside?

modifiedGMC · 08-12-2005, 10:35 AM

Quote:

Originally Posted by Putter

Any chance to get a picture of the underside?

Sure just give me a few minutes and I'll post one.

Putter · 08-12-2005, 12:05 PM

Hurry....today is payday!!!!! Headed to the junkyard tomorrow, so Monday I will be broke again!!!!

modifiedGMC · 08-12-2005, 12:17 PM

Quote:

Originally Posted by Putter

Hurry....today is payday!!!!! Headed to the junkyard tomorrow, so Monday I will be broke again!!!!

HERE'S SOME PICS OF THE BACK SIDE. sorry about the wait but I had some BAD computer problems and could even get back online.

68 chevy truck-TPI · 08-12-2005, 12:21 PM

ready to buy{NO BULL ****} i need it, just let me know if it's still for sale.

Putter · 08-12-2005, 12:27 PM

Man, I can't decide if I want to do that or not. If 68 chevy truck-TPIwants to step in ahead of me, he is more than welcome to. If it doesn't sell to him, I might take it. It literally takes me two days to buy SHOES!!!!

modifiedGMC · 08-12-2005, 12:29 PM

Quote:

Originally Posted by 68 chevy truck-TPI

ready to buy{NO BULL ****} i need it, just let me know if it's still for sale.

Like I said before first one with $$$ gets it Yes I still got it.

68 chevy truck-TPI · 08-12-2005, 12:32 PM

PM me your mailing address and total cost shipped to 30577.
thanks

modifiedGMC · 08-12-2005, 12:47 PM

Quote:

Originally Posted by 68 chevy truck-TPI

PM me your mailing address and total cost shipped to 30577.
thanks

P/M sent with total cost shipped UPS Ground

Inspector722 · 08-12-2005, 02:58 PM

If that one sales, could you make another one? I have one in very good shape without the antenna hole from the factory.

modifiedGMC · 08-12-2005, 08:22 PM

Quote:

Originally Posted by Inspector722

If that one sales, could you make another one? I have one in very good shape without the antenna hole from the factory.

I could but couldn't say when or how long it would take. That was one of those projects I worked on over a period of about a month or two just piddlin with it on break, lunch or when ever I had a spare minute.

08-05-2005, 07:41 PM	#1
modifiedGMC Registered User Join Date: Oct 2004 Location: Walker Co. Alabama Posts: 474	smoothed cowl panel for sale I have a cowl panel that has been filled and smoothed on the outer two openings and the antenna hole. Holes were filled with sheet metal (donated from an old hood) then filled with bondo filler. The two center openings were left open for air to enter. If you have a cowl hood or scoop the two center openings will be hidden behind the scoop. It still may need a little sanding work done but is already smooth. I'm asking $50 (negotiable or trade for??) plus shipping. I'm not sure exactly what year it's from but is between 67 to 72. The second picture is of my truck before and after mine was installed. I wanted to list it here before putting it on e-bay this weekend. P/M me but First come first served. MINE __________________ If it don't fit, force it,...If it still don't fit , modify it 'till it does fit !!! Last edited by modifiedGMC; 08-05-2005 at 10:43 PM.

08-06-2005, 10:11 AM	#2
modifiedGMC Registered User Join Date: Oct 2004 Location: Walker Co. Alabama Posts: 474	last call it, will go on e-bay later today. Price is negotiable or might trade. __________________ If it don't fit, force it,...If it still don't fit , modify it 'till it does fit !!!

08-06-2005, 10:59 AM	#3
decade22ten Registered User Join Date: Mar 2004 Location: houston,texas Posts: 103	reply Hi. would you take $25.00 plus ride or trade for my original cowl piece?

08-07-2005, 12:35 PM	#4
modifiedGMC Registered User Join Date: Oct 2004 Location: Walker Co. Alabama Posts: 474	decade22ten: PM sent __________________ If it don't fit, force it,...If it still don't fit , modify it 'till it does fit !!! Last edited by modifiedGMC; 08-07-2005 at 03:25 PM.

08-07-2005, 01:33 PM	#5
woodman13 woodman13 Join Date: Jul 2004 Location: Moody, Tx Posts: 261	Still for sale? If so I'll take it. $25 plus shipping. __________________ Woodman13 2007 Dodge Ram 3500 5.9 rolling coal! 1994 Caprice 9C1 88K miles, LT-1, dropped/shaved 1967 C-30 350 4 sp dually 1971 C10 SWB BBC, auto; good driver

08-07-2005, 03:27 PM	#6
modifiedGMC Registered User Join Date: Oct 2004 Location: Walker Co. Alabama Posts: 474	sale pending waiting on reply from decade22ten __________________ If it don't fit, force it,...If it still don't fit , modify it 'till it does fit !!!

08-07-2005, 04:41 PM	#7
woodman13 woodman13 Join Date: Jul 2004 Location: Moody, Tx Posts: 261	Ok, just let me know.....would look kewl on my new 69..... __________________ Woodman13 2007 Dodge Ram 3500 5.9 rolling coal! 1994 Caprice 9C1 88K miles, LT-1, dropped/shaved 1967 C-30 350 4 sp dually 1971 C10 SWB BBC, auto; good driver

08-12-2005, 10:15 AM	#8
modifiedGMC Registered User Join Date: Oct 2004 Location: Walker Co. Alabama Posts: 474	Last Call Last call for it. Couple of people wanted it but decided not to. Thought I'd give it one more shot on here. Post or Send p/m with zip for shipping quote. __________________ If it don't fit, force it,...If it still don't fit , modify it 'till it does fit !!!

08-12-2005, 10:30 AM	#9
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Any chance to get a picture of the underside? __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

08-12-2005, 12:05 PM	#11
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Hurry....today is payday!!!!! Headed to the junkyard tomorrow, so Monday I will be broke again!!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

08-12-2005, 12:21 PM	#13
68 chevy truck-TPI A WORK IN PROGRESS Join Date: Apr 2004 Location: toccoa, georgia Posts: 205	ready to buy{NO BULL ****} i need it, just let me know if it's still for sale.

08-12-2005, 12:27 PM	#14
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Man, I can't decide if I want to do that or not. If 68 chevy truck-TPIwants to step in ahead of me, he is more than welcome to. If it doesn't sell to him, I might take it. It literally takes me two days to buy SHOES!!!! __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

08-12-2005, 12:32 PM	#16
68 chevy truck-TPI A WORK IN PROGRESS Join Date: Apr 2004 Location: toccoa, georgia Posts: 205	PM me your mailing address and total cost shipped to 30577. thanks

08-12-2005, 02:58 PM	#18
Inspector722 Fixing my 67, & loving it Join Date: Jun 2004 Location: Bridge City, Texas Posts: 524	If that one sales, could you make another one? I have one in very good shape without the antenna hole from the factory. __________________ Email address- inspector722@aol.com Zip Code- 77611 Shipping- DHL & USPS Working on: 67, large back glass, 307 V8, 200 4R, 3.73 rearend, Short Stepside Bed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.