The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-20-2013, 12:08 PM   #1
Fatolbaldguy
Registered User
 
Fatolbaldguy's Avatar
 
Join Date: Apr 2013
Location: Surprise Arizona
Posts: 13
electric fan vs shroud

I have now added an air conditioner to my 292 1965 c20. Which in turn required a beefyer alternator which I also put in. A six blade fan was put in. Now it runs hot. True the afternoon temps around here rarely dip below 105 so that does not help either. Hence the need for an air conditioner. Several folk have recommended taking off the engine mounted fan and putting in an electric fan. Also a shroud has been recommended.
A shroud specifically designed for a straight six chevy of my vintage has been elusive to say the least. My question is can I do both? Should I do both? What shroud should I buy? What fan system. Thanks
Fatolbaldguy is offline   Reply With Quote
Old 06-20-2013, 12:32 PM   #2
tincan1966
Registered User
 
tincan1966's Avatar
 
Join Date: Oct 2010
Location: Independence,KS
Posts: 1,477
Re: electric fan vs shroud

I personally would install an OEM V8 radiator(altho most list the 292 and V8 as same) with the correct shroud and install a clutch fan with 6 or 7 blades.

Even with an electric fan, some type of shroud needs to be in place to direct the most amount of air you can draw thru the radiator. Simple mounting a 14-16" fan to your radiator is leaving almost 1/2 of the radiator surface unused, unless driving at highway speeds since you now have a condensor in front of it.

You need to make sure that the maximum amount of air you can get thru the grill opening is coming thru the radiator- and that will include installing side baffles, if they are missing.
tincan1966 is offline   Reply With Quote
Old 06-20-2013, 12:35 PM   #3
markeb01
Senior Enthusiast
 
markeb01's Avatar
 
Join Date: Feb 2007
Location: Spokane Valley, WA
Posts: 8,356
Re: electric fan vs shroud

Mechanical or electric fan really doesn’t make that much difference, it’s a matter of how much air either one can move through the radiator that counts. The shroud needs to reach every corner of the radiator core so the fan can pull cooling air through every square inch. And it needs to be designed deep enough to allow generous airflow through the radiator at highway speeds, when forward motion should assist in cooling the engine.

I have a Flex-a-Lite Black Magic electric fan on mine. It works adequately where I live, because it normally doesn’t get very hot around here. But the built in shroud only covers about 2/3’s of radiator core which would do very little good in your climate.

For years I’ve read you should never do away with the mechanical fan since it will always be there working after an electric fan burns out leaving you stranded. In truth, I’ve never seen or heard of an electric fan failing in the last 20 years. They are standard in many/most new cars now, and are as reliable as modern power windows.

I’d suggest finding a shroud that completely covers your radiator as the first priority, for either style fan. If that doesn’t fix the problem you may have to consider stepping up to a more efficient radiator.
__________________
My Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=444502
markeb01 is offline   Reply With Quote
Old 06-20-2013, 01:09 PM   #4
Rufton
Registered User
 
Join Date: Apr 2013
Location: Knoxville TN
Posts: 1,170
Re: electric fan vs shroud

On my modded small block I installed a big block spec radiator. I have run different fan configurations and they have all worked fine. Started out w/ shrouded elec puller and backup elec pusher. Currently getting sufficient cooling w/ no shroud mechanical but I did leave elec pusher just in case. Over sized healthy radiator comes in handy about this time of year.
Rufton is offline   Reply With Quote
Old 06-20-2013, 01:50 PM   #5
vin63
It's Better With Nitro
 
vin63's Avatar
 
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 2,262
Re: electric fan vs shroud

My buddy in Phoenix ran two electric puller fans in his A/C equipped C10 with a 406, but with a V8-sized radiator and full shroud. It was his daily driver and used it as his printing business delivery vehicle.

__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside
Pontiac 462 ci, Kauffman D-Port alum. heads
4L80E, narrowed sheetmetal Ford 9-inch
Tubular front and rear suspension
Custom 6-piston front disc and 4-piston rear disc brakes
vin63 is offline   Reply With Quote
Old 06-21-2013, 09:11 AM   #6
TJ's Chevy
Registered User
 
TJ's Chevy's Avatar
 
Join Date: Mar 2013
Location: Southern Oregon
Posts: 10,384
Re: electric fan vs shroud

My dad's 496 Big Block Chevy uses a Durmax Diesel radiator and dual electric fans. I would put a single 16 inch electric fan with a shroud. If you can find one that has a factory draw of 2000 cfm and ad a shroud you should be fine.

My buck and 1/2.
__________________
1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643
1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056
My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw
TJ's Chevy is offline   Reply With Quote
Old 06-21-2013, 11:12 AM   #7
Greg63
Enjoy your truck
 
Greg63's Avatar
 
Join Date: Oct 2007
Location: Newmarket, Ontario, Canada
Posts: 1,066
Re: electric fan vs shroud

I have both an electric fan and the factory fan shroud. The shoud covers the electric set-up which keeps it kinda looking stock.
The fan I used, strangely enough , is a Chrysler set up. I wrote the number down but can't find the paper I wrote it on.
The dimensions are perfect to fit inside the shroud and it covers the entire fin assembly. It has it's own shroud built as part of the design, and the fan motor can be plugged in to push or pull the air.

Greg.
__________________
1 Corinthians 10:13

1963 Chevrolet 1/2 ton
2010 Camaro SS/RS
2014 Jeep Grand Cherokee
2016 Jeep Cherokee
Greg63 is offline   Reply With Quote
Old 06-21-2013, 12:09 PM   #8
tincan1966
Registered User
 
tincan1966's Avatar
 
Join Date: Oct 2010
Location: Independence,KS
Posts: 1,477
Re: electric fan vs shroud

I know it's a bad word, but have heard the fan assy from a Crown Vic police car are supposed to be good-flowing something like 2600+ CFM-specialy designed for alot of idle time and for hard driving conditions. I have one but have not used it.
tincan1966 is offline   Reply With Quote
Old 06-21-2013, 12:21 PM   #9
Rufton
Registered User
 
Join Date: Apr 2013
Location: Knoxville TN
Posts: 1,170
Re: electric fan vs shroud

Quote:
Originally Posted by tincan1966 View Post
I know it's a bad word, but have heard the fan assy from a Crown Vic police car are supposed to be good-flowing something like 2600+ CFM-specialy designed for alot of idle time and for hard driving conditions. I have one but have not used it.
I bet they do have a strong fan in those cruisers; the police run em pretty hard.
Rufton is offline   Reply With Quote
Old 06-21-2013, 01:29 PM   #10
63MOUSE
Registered User
 
Join Date: May 2011
Location: Glendale AZ
Posts: 98
Re: electric fan vs shroud

i deal with the heat every day like you . last weekend i installed a fan set up in my truck. i had my 4 core radiator worked on and asked the radiator specialists what is the best electric fan to install and they said flex a lite black magic and to go to loper's to get one. loper's said they have a fan that they tested in their shop and the lower cfm maradyne blew the 3300 cfm black magic out of the water. i got the twin fan 2600 cfm and it covers all of the radiator except about 2 inches of the bottom. been putting it thru tests all week and so far its great. i hooked up each fan separately so i can test it with 1 fan or 2. but i agree with most, a good radiator and make sure the air flows thru and not around the radiator
63MOUSE is offline   Reply With Quote
Old 06-21-2013, 03:47 PM   #11
Greg63
Enjoy your truck
 
Greg63's Avatar
 
Join Date: Oct 2007
Location: Newmarket, Ontario, Canada
Posts: 1,066
Re: electric fan vs shroud

Here is what mine looks like (shrouded fan within a fan shroud);



Greg
__________________
1 Corinthians 10:13

1963 Chevrolet 1/2 ton
2010 Camaro SS/RS
2014 Jeep Grand Cherokee
2016 Jeep Cherokee
Greg63 is offline   Reply With Quote
Old 06-21-2013, 04:20 PM   #12
Fatolbaldguy
Registered User
 
Fatolbaldguy's Avatar
 
Join Date: Apr 2013
Location: Surprise Arizona
Posts: 13
Re: electric fan vs shroud

arggh Greg/mouse! I just ordered a reproduction shroud for my Truck. I talked to an AC specialist mechanic and he said my aluminum aftermarket radiator that came in the truck is plenty big. Hopefully the 10-15% increase in cooling expected with adding a shroud will work. I have my doubts. I hate to think I threw another $115 at the problem for nothing!
63Mouse have you got a link maybe?
Fatolbaldguy is offline   Reply With Quote
Old 06-21-2013, 05:16 PM   #13
Fatolbaldguy
Registered User
 
Fatolbaldguy's Avatar
 
Join Date: Apr 2013
Location: Surprise Arizona
Posts: 13
Re: electric fan vs shroud

I cancelled the order for the shroud and talked to the owner of Lopers on the phone. (he answered the phone love that) and he said he has what I need so going to put Jugs of water in the back of old spooky and ride over tomorrow and drop off some money at Lopers..
Fatolbaldguy is offline   Reply With Quote
Old 06-28-2013, 02:47 PM   #14
Fatolbaldguy
Registered User
 
Fatolbaldguy's Avatar
 
Join Date: Apr 2013
Location: Surprise Arizona
Posts: 13
Re: electric fan vs shroud

It took alot longer than I expected but the electric fan is in and wired. The first fan I bought was too fat. Those 292s are long! So I trudged back to Loper's and got the twin fan unit which fit fine though It covers less real estate than the single did. Plus much more money But I can't complain I was ready to buy a radiator with a built in fan and they aint
cheap. How does it run? Well I only tested it yesterday but so far it still runs hotter than it used to before this saga began but it idles without over heating. It runs smoother without that windmill out front. Fo some reason the alternator seems to be charging like the battery is dead. That has me stumped I don't think I changed anything there. Thanks for all the help. Its nice to have the old girl back in the stable.
Fatolbaldguy is offline   Reply With Quote
Old 06-28-2013, 03:06 PM   #15
tincan1966
Registered User
 
tincan1966's Avatar
 
Join Date: Oct 2010
Location: Independence,KS
Posts: 1,477
Re: electric fan vs shroud

If the fan is running, you have about a 15-20 amp draw on the system, so the alt is going to kick in to keep up. If still running an external alt system, you may actually lose voltage at idle with the fan running. I'd suggest about a 63 amp or higher alternator with internal regulator, unless you've already done that conversion.

I am sure there are other fixes with external regs, but I am not familiar with those, I always replace with internal reg alts.
tincan1966 is offline   Reply With Quote
Old 06-28-2013, 03:09 PM   #16
vin63
It's Better With Nitro
 
vin63's Avatar
 
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 2,262
Re: electric fan vs shroud

Electric fans can draw a lot of amps. A couple of questions: did they wire the fans with relays are they controllable individually so you can turn one off while driving at freeway speeds; and what is the output rating of your alternator?
__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside
Pontiac 462 ci, Kauffman D-Port alum. heads
4L80E, narrowed sheetmetal Ford 9-inch
Tubular front and rear suspension
Custom 6-piston front disc and 4-piston rear disc brakes
vin63 is offline   Reply With Quote
Old 06-28-2013, 06:45 PM   #17
AzCountryman
Registered User
 
AzCountryman's Avatar
 
Join Date: Jun 2013
Location: Vail,Arizona
Posts: 65
Re: electric fan vs shroud

Little off topic.....I always worry about overheating here in Az. Blew my Explorer engine when I was younger from that. But heck it was a Ford. I installed autometer gauges in my 66 and it has a 327. The autometers dont have a red line for overheating so what is the "oh crap" temp for that engine?
__________________
Are you a collector? If so come check out Collectorsunleashed.com Doesnt matter what it is we have a spot to show it off.
http://www.collectorsunleashed.com/#
AzCountryman is offline   Reply With Quote
Old 06-28-2013, 07:53 PM   #18
Rufton
Registered User
 
Join Date: Apr 2013
Location: Knoxville TN
Posts: 1,170
Re: electric fan vs shroud

50/50 ethylene glycol w/ a 15 psi cap boils at approx 265F. Engine may self destruct quickly after significant percentage of coolant exceeds boiling point. Engine may self destruct at lower indicated temp. Temp sender may not accurately measure coolant temp, so max "oh crap" temp indication can vary. I like to make a note of normal operating temp indication so I'll know when things are getting heated. Oil temp and head temp are useful data points if overheating is suspected.
Rufton is offline   Reply With Quote
Old 06-28-2013, 08:15 PM   #19
Fatolbaldguy
Registered User
 
Fatolbaldguy's Avatar
 
Join Date: Apr 2013
Location: Surprise Arizona
Posts: 13
Re: electric fan vs shroud

Its 117 degrees here today. I'm just going to leave it in the driveway for awhile.
Fatolbaldguy is offline   Reply With Quote
Old 06-28-2013, 08:59 PM   #20
Rufton
Registered User
 
Join Date: Apr 2013
Location: Knoxville TN
Posts: 1,170
Re: electric fan vs shroud

Back in the day, my grandfather said something about stringing bags of ice in front of radiator to fight overheating when they traveled from TN to AZ. I don't imagine that's popular nowadays
Rufton is offline   Reply With Quote
Old 06-28-2013, 09:20 PM   #21
Rich 5150 69
Registered User
 
Rich 5150 69's Avatar
 
Join Date: Nov 2009
Location: Galt, Calif
Posts: 2,437
Re: electric fan vs shroud

They used these back in the 20`s to the 50`s hanging in front of the grille...
__________________
`64 C10 vortec 350/350/373 posi
`69 RS/SS 350/350/308
`37 Ford 406/350/324 traclock
`68 Dart 370/904/323 suregrip
Rich 5150 69 is offline   Reply With Quote
Old 06-28-2013, 09:32 PM   #22
Rufton
Registered User
 
Join Date: Apr 2013
Location: Knoxville TN
Posts: 1,170
Re: electric fan vs shroud

Cool.
Rufton is offline   Reply With Quote
Old 06-29-2013, 03:35 AM   #23
lasher78
Registered User
 
lasher78's Avatar
 
Join Date: Jun 2013
Location: harviell, mo
Posts: 246
Re: electric fan vs shroud

new to fab work... if you want to fab a shroud how does it actually fasten to the radiator....mine does not have one and i dont see anything on the sides to fasten to
Posted via Mobile Device
__________________
live like you are dying
lasher78 is offline   Reply With Quote
Old 06-29-2013, 03:54 AM   #24
lasher78
Registered User
 
lasher78's Avatar
 
Join Date: Jun 2013
Location: harviell, mo
Posts: 246
Re: electric fan vs shroud

and does anybody have a link to that blaxk magic fan?
Posted via Mobile Device
__________________
live like you are dying
lasher78 is offline   Reply With Quote
Old 06-29-2013, 09:12 AM   #25
'63GENIII
Registered User
 
'63GENIII's Avatar
 
Join Date: Sep 2008
Location: San Carlos, Ca.
Posts: 3,048
Re: electric fan vs shroud

I had a hard time keeping my truck cool before I had a shroud too. I went elect. and that didn't work. I tow approx. 8k of stuff to the lake during the summer mos. when it can get real warm. It took me a long time to take everyone's advice but I got a stock repro shroud, a 6 blade oem fan and clutch. Running a stock 4 core brass radiator with a 190 deg. t-stat. (I like the engine to run a little warmer). I've run this truck up around Sacramento area, sitting in traffic, 105+ deg. days and have NEVER had an issue. No pinging, dieseling ect. Before the shroud however, I couldn't even run to the corner store two blocks away without boiling over. I'm not saying it's for everyone, but the factory setup worked for me. When it starts getting warm, you really hear the fan kicking in. It can be a little annoying but way less annoying than wondering if you're gonna overheat on a hot day.
__________________
Chris


'63 k15 long step
Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205
52" front and 63" rear spring swap
D44 / 14bff - disc axles
Milemarker 9K and 10.5K hydraulic winches

63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread


NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build

L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29
'63GENIII is offline   Reply With Quote
Reply

Bookmarks

Tags
cooling, electric fans, shroud


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:57 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com