![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Registered User
Join Date: Sep 2014
Location: Sterling, Il
Posts: 4
|
Major rust in "A" pillar, repair ideas needed ...
I have a 65' GMC that has major rust in the "A" pillar that is in need of repair/replacement. I'm not having any luck finding a patch piece for this section (which I didn't expect to find). That being said, I know most people will recommend swapping the whole cab out with another donor, but I really don't have access to the equipment you would need to swap out the cab.
If you were going to tackle repairing this section of the cab, how would you go about it. I have access to sheet metal (not sure what thickness to buy?) and I have my own gas Mig, plus hammers and dollies. I've never repaired a body section like this, especially one that has this kinda of curvature and structural importance. Any and all advice is appreciated ... Thanks!
__________________
I like anything that turns money into noise ... |
![]() |
![]() |
![]() |
#2 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,894
|
Re: Major rust in "A" pillar, repair ideas needed ...
Easiest way would get a new cab and use it. Other thing if you want to keep your cab would find one that the top is in good shap, and cut it off at the pillars, and weld the new top onto the lower portion of your cab.
With that mush rust there I wonder how much of the firewall/floor areas are deteriorated
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Sep 2010
Location: Winchester Oregon, formerly Vancouver BC
Posts: 2,949
|
Re: Major rust in "A" pillar, repair ideas needed ...
I have a complete roof but it would be expensive to ship.
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Jan 2015
Location: Mount Juliet, Tn
Posts: 138
|
Re: Major rust in "A" pillar, repair ideas needed ...
Ship it by grey hound is a lot cheaper sometimes
|
![]() |
![]() |
![]() |
#5 |
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: Major rust in "A" pillar, repair ideas needed ...
You can technically section and re-skin that portion, if you had the good cab section to replace it with. The problem is usualyl that the underlying metal also rusted, and you wind up "chasing" rust further into the other panels that you first thought.
You also have to be careful to make sure that the windshield will ever seal again.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2014
Location: Olive Branch
Posts: 2
|
Re: Major rust in "A" pillar, repair ideas needed ...
i dont think its so horrible a new cab is necessary. I'd start by cutting it out and seeing what youre dealing with.
|
![]() |
![]() |
![]() |
Bookmarks |
Tags |
body, cab, repair, rust |
|
|