The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-12-2011, 06:17 PM   #1
C15_Sierra
Registered User
 
C15_Sierra's Avatar
 
Join Date: Apr 2011
Location: Hartford CT
Posts: 223
Pedal ratios

My truck has manual brakes, and was a 3spd manual truck from the factory. When the automatic was swapped in, the PO removed the clutch pedal, but kept the small brake pedal in, instead of swapping a bigger auto pedal in. Now I know why.

This week, I snagged the correct brake pedal from an '86 K20 that my buddy was junking, went to install it today before I put in the new steering column. When I got the old pedal off, I noticed there were different pedal ratios. I was curious if there were different pedal ratios for power/manual brakes, now I know what they are.

The manual pedal has a ratio of ~5.82:1, the auto pedal has a ratio of 4.57:1. This gives me about 21.5% less force on the MC when I press the pedal. Figured I might as well install the pedal now, work with the decreased pedal ratio until I get around to installing the vacuum booster setup I have

BUT

When I went to install it, there wasn't enough travel in rod to line up with the pin on the auto pedal, and there's no hole drilled for manual brakes like in the manual pedal. So looks like I'm gonna have to do the booster conversion now

I'm was just posting 'cause I couldn't find any info on it before, now I know and sharing so that others in a similar situation can know

Obligatory pics...auto pedal on top, manual on bottom


Quick calcs...
__________________
-Steve

1980 GMC C15 Sierra LWB
Dark Carmine Red/Carmine Int
Was: 250/3spd (1980-88), then a 305/TH350 (1988-2011)
Now: 5.3/4L60E, 2.73 12-bolt open rear
C15_Sierra is offline   Reply With Quote
Old 11-12-2011, 06:24 PM   #2
J Knight
Registered User
 
J Knight's Avatar
 
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
Re: Pedal ratios

Thanks for sharing, before I thought the only difference was the pedal width.
__________________
John
82 Chevy Silverado 350ci/TH350
J Knight is offline   Reply With Quote
Old 11-12-2011, 06:36 PM   #3
C15_Sierra
Registered User
 
C15_Sierra's Avatar
 
Join Date: Apr 2011
Location: Hartford CT
Posts: 223
Re: Pedal ratios

As you can see, the rest of the holes lined up for power brakes (and presumably the hydroboost one is the one closest to the pedal).

So you're right in thinking the only difference is width, when comparing manual/auto brake pedals with the same type of assist.

But since auto trannies probably weren't available with manual brakes, they didn't drill for manual brakes on the auto pedal.

I'm just highlighting the different pedal ratios for manual assist vs. vacuum assist.
__________________
-Steve

1980 GMC C15 Sierra LWB
Dark Carmine Red/Carmine Int
Was: 250/3spd (1980-88), then a 305/TH350 (1988-2011)
Now: 5.3/4L60E, 2.73 12-bolt open rear
C15_Sierra is offline   Reply With Quote
Old 11-12-2011, 08:01 PM   #4
Corts60
Just here to tinker
 
Corts60's Avatar
 
Join Date: Jun 2008
Location: Holland, MI
Posts: 3,697
Re: Pedal ratios

Great info man! Thanks for posting!
Corts60 is offline   Reply With Quote
Old 11-13-2011, 08:53 AM   #5
mrhino
Account Suspended
 
Join Date: Aug 2007
Location: USA
Posts: 1,223
Re: Pedal ratios

Yep I had to find out about pedal ratio's the hard way as well on my last project. took me two days to figure out why I couldn't bleed the rear brakes on my power rear disc brake conversion. Thanks for sharing.
mrhino is offline   Reply With Quote
Reply

Bookmarks

Tags
brakes, pedal, power, ratio


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:31 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com