Classic Parts rear bumper review

[Rfhimes]

Mine will be next, thanks for the inspiration , LOL

[Holliday]

Originally Posted by Rfhimes

Mine will be next, thanks for the inspiration , LOL

I think your truck is going to look great with a bumper! Good luck with the cuts

[Rfhimes]

Thanks, and by the way did you fill the notch cut out in the panel for the installation of the roll pan license plate box before installing the new bumper? Thanks, Rick

[Holliday]

Originally Posted by Rfhimes

Thanks, and by the way did you fill the notch cut out in the panel for the installation of the roll pan license plate box before installing the new bumper? Thanks, Rick

I haven't patched that price yet but it' not to bad. I have some paint and body I need to do after I get this thing all back together. If you look close at the pics you can the notch.

[jhama78]

Looks great, this is on the short list of things to do on my 67 in the near future. If you happen to have your receipt handy could you post up the part numbers for reference so that myself as well as others can order everything necessary to do this job? Thanks in advance!

[1972BlueC20]

Looks great Holliday!

I'm wanting to put this bumper on my 72 fleetside too....what all parts did you have to order as far as brackets and bolts??

I know I need the bumper and license plate bracket assembly, but im confused which brackets and bolts to get....also the license plate light you have...

I currently have an aftermarket non original type bumper with a trailer ball and I don't like the way it looks....so I might already have some brackets which may or may not work with this repro bumper....any help is appreciated.

[1972BlueC20]

Ok, I answered my own question with help from classic parts.


Here is what I need to install this bumper on my 72 2WD Fleetside


Bumper Rear Chrome : Part # 65-054
License Plate Bracket Assembly : Part # 51-241
Bumper Brackets (comes in set of 4) : Part # 65-348
Bumper Bolt-Large (you will need Qty of 4) : Part # 65-105
Bumper Bolt-Small (you will need Qty of 4) : Part # 65-107
License Lamp Assembly : Part # 51-235


Hope this helps!!


-Brian

[Dennis_Earl]

Hey I have the diamond cut step bumper and am wanting to upgrade to this kind. Does the brackets work interchangeably?