50 Chevy Trck Chassis

[renegade8720]

Hi, the wheels are 15 x 15 Billet Specialties Street Lites with Mickey Thompson radials 18.5 x 29 on the rear with 5.5" back spacing. The front is the same in 15 x 8 with Mickey Thompson radials with 3.5" back spacing.

Thanks,

Renegade

[renegade8720]

Hi,

The x member is a Progressive Automotive. Great quality and easy to install.

Thanks,
Renegade

[renegade8720]

Thanks for the comments RatRod.
We added the grease fittings as a after thought. I am glad we decided to add them though.

Thanks,
Renegade

[bo21]

That is one nice frame, what size rims and tires are those and what back spacing.

[duwem]

Holy air filters batman!

Is that a progressive automotive x member?

[ratrodmiller]

i love the wat you utilized the existing frame to narrow rear ! looks awesome i wish i would have done mine.. also i see your 4 link bars have grease fittings .i like that too . did you add them ?

[renegade8720]

Hey Guys,

We just got done with the exhaust set up and the first couple of custom running board brackets. The exhaust and the brakets are going to be ceramic coated to match the headers. The brackets are made of heavy wall stainless.

Renegade

[renegade8720]

More pics

[Helilog56]

Beautiful work dude...!!!!!!
Posted via Mobile Device

[oldman3]

Nice chassis....Jim

[mknittle]

Almost too pretty to cover up!

[duwem]

Did you look at running the exhaust through the frame X member, I'm hoping to do that on mine.

[Love2Fab1]

duwem,
We looked at several different routes for the exhaust but inside the frame was just to busy. We found a tip design we thought would look good coming out at the rear of the running board and went to work. The trans cooler is actually now mounted inside the x-member at this point. We liked the space for air flow. These exhaust tips are going to be the biggest I've ever fooled with as they span the width of the running board plus some length for paint protection. I'm sure Renegade will post some pics when we get further along. Thanks for the great comments all!

Fab1

[renegade8720]

Hey all,

Fab1 and I will be working on the chassis some more this week end. I will post some more pics of our progress.
He has made a custom fuel line mount along with custom mounts for the trans cooler. Hopefully, we will get the 3/8 hard line formed and run this weekend too.
We also have the fuel tank mounted with custom built stainless mounts and plumbed up to the motor.
I would like to thank Fab1 for all his time and skills he has put into working with me on this build!

Renegade

[Fat Mike]

How did you attach the two frames together where you narrowed it? Also, how did you fasten the running board brackets to the frame?

[Love2Fab1]

Renegade, You da man! Lol! Fun times. Fat Mike, the frame was carefully measured (Renegade is very meticulous with measurements), cut and narrowed to it's final position and box steel welded into the offset. We then welded a smaller tube under the connection for reinforcement, all before the entire frame was boxed. It turned out straight as an arrow thanks to some well place floor markings. Helps if the floor your working on is fairly level as Renegades' is. He made sure. Lol! Thanks guys! Oh yeah, The running board mounts are flanged just like the originals. The white behind them is gortex stuck to the frame to help with heat dissipation. We welded nuts into the frame before we boxed it (5/16"). Thanks again!

Fab1

[oldman3]

That some damn nice work, and the plumbing is very nice.....Jim

[solidaxel]

You and the guy that changes the oil will be the only ones to really enjoy all the work time and money you spent to create this work of art!

And now you are going to cover it all up with some sheet metal!!

[Love2Fab1]

Jim (Oldman3),
Thanks for the compliments! Renegade and I both look @ your build thread on regular occasion. Very inspirational! In fact, the dowel rod for steering alignment was picked up from the third or fourth page of your build. Great idea and cheeper than guessing by far.
solidaxel,
Thanks for suggesting that this is "art". I wouldn't go so far but we appreciate it. Renegade has every intention of keeping and driving this truck, so we wanted to do it justice. I would imagine the builder and guy that changes the oil would be one and the same in this case.
Fab1

[oldman3]

Thank you for the compliment about my build. I got the dowel rod thing from somone years ago and have used it ever since.....Jim

[jim-bob]

........:smoke

[renegade8720]

Hey everyone,

Fab 1 and I got a little more compleated on the exhaust tips today.
Let us know what you think about this design. Fab 1 is also going to make a small stainless visor that will mount to the running board around the tips to complete the look.

Renegade

[renegade8720]

More pics

[renegade8720]

Hey everyone,

Fab1 and I got a little done today. Fab1 made a heat shield for one of the mufflers out of 1/8th aluminum. We welded flange nuts to the muffler as spacers and for mounting the heat shield. Now we have the shields for the other muffler and both tips to make. I will post more pics as we get more done.

Renegade

[renegade8720]

Forgot to post the pics.